Inflating your OLAIAN SURF 500 Compact Inflatable Surfboard safely and effectively is easy! Here’s a step-by-step guide: 1. Unpack your board: Take the OLAIAN SURF 500 Compact Inflatable Surfboard out of its bag and lay it flat on a clean, soft surface. 2. Valve check: Ensure the valve push button is in the 'up' position. If it's down, press it to pop it up. This is crucial for inflation. 3. Connect the pump: Attach the high-pressure pump to the valve securely. 4. Inflate to the correct pressure: Use the pump to inflate the board to the pressure specified on the MAX pressure chart (found on the board itself). If you accidentally overinflate, use the valve to release a bit of air until it reaches the correct pressure. 5. Disconnect and seal: Once inflated, detach the pump and close the valve cap tightly. 6. Fin installation: Flip the board over and install the fin, making sure the curved part faces the back of the board. 7. Leash attachment: Securely attach the leash to the fabric ring located at the rear of the board. 8. Ready for the water: Carry your OLAIAN SURF 500 Compact Inflatable Surfboard to the water without dragging it. Attach the leash to your ankle or knee before entering the water. Remember: Avoid over-inflating your board, as this can cause damage. Always refer to the recommended pressure guidelines printed on your OLAIAN SURF 500 Compact Inflatable Surfboard.
