How do I disable Wi-Fi on my MONTIGO XT0081 remote (RGC3105) to sync with the IFC control module?

[KimberlyFitz]

To disable Wi-Fi on your MONTIGO XT0081 remote control (transmitter RGC3105) and prepare it for syncing with the IFC control module, follow these steps: First, partially insert the batteries into the battery holder. Next, press and hold both the Power On/Off button and the O button simultaneously. While holding these buttons, fully insert the batteries into the battery holder. You'll see various icons displayed on the screen. Each icon can be set (indicated by "Set") or unset (indicated by "Clr"). Continue holding the Power On/Off button and press the O button to cycle through the icons. Look for the Transmission icon; it should initially be in the "Clr" state. With the Power On/Off button still held down, press the Up button to set the icon. This action will remove the icon from the screen. Finally, release the Power On/Off button. The Wi-Fi functionality is now disabled, enabling the Tx Remote Command. After disabling Wi-Fi, proceed with the standard syncing procedure. Press the red SW1 button on the IFC control board and the ON/OFF button on your transmitter simultaneously. You should hear three beeps when the SW1 button is pressed on the IFC board, followed by another three beeps to confirm successful pairing. For detailed instructions and troubleshooting, consult the MONTIGO XT0081 Remote Control User Manual.