Properly connecting the wires is essential for the safe and correct function of your Signature Hardware 440743 Beatty 1-Light Fixture. Here’s a straightforward guide, referencing the installation manual:
- Thread Mounting Screws: Begin by threading the mounting screws (A) into the corresponding holes located on the circular strap (B).
- Secure the Circular Strap: Attach the circular strap (B) to your outlet box using the outlet box screws (C).
- Wire Connections: This is a critical step. Connect the white wire from the fixture to the white wire from the outlet box. Similarly, join the black wire from the fixture to the black wire from the outlet box. Secure these connections with the provided wire connectors. For added safety, wrap these connections with electrical tape. Also, connect the copper ground wires from the fixture and the outlet box to the ground on the circular strap, securing them with electrical tape.
- Tuck Wires: Once the wires are securely connected, carefully tuck them inside the outlet box.
- Attach the Front Plate: Position the front plate (D) so that the mounting screws (A) protrude through the holes on the front plate. Then, secure the front plate using the ball nuts (E).
Important Note: If you have any doubts or questions regarding the electrical aspects of the installation, it's always best to consult your local electrical code for approved grounding methods or seek assistance from a qualified electrician to ensure everything is connected correctly and safely.
