How do I correctly inflate my JOBE Inflatable SUP?

[CamillaAnn]

Inflating your JOBE Inflatable SUP correctly is key to a safe and enjoyable experience. Here's a step-by-step guide:

1. Valve Setup: Locate the inflation valve on the back of your board. Make sure the valve pin in the center is in the 'up' or closed position.

2. Inflation Process:

   • Attach the pump hose to the 'inflate' port on the pump handle.
   • Connect the pump hose nozzle securely to the valve on your JOBE SUP.
   • Pump air into the SUP using the pump handle, moving it up and down.

3. Fin Installation (can be done before or after inflation):

   • Insert the back of the fin, with its pin, into the mounting slot on the board.
   • Slide the fin backward.
   • Push the front of the fin down to secure.
   • Lock the fin by pushing the lever down.

4. Important Inflation Tips and Safety:

   • You can use the included hand pump or an electric air pump designed for SUPs.
   • Never use an air compressor, as it can damage your JOBE SUP.
   • Always check the pressure before each use to ensure the board is airtight.
   • Initially, inflate your board and leave it for 24 hours to check for any pressure loss.
   • Do not over-inflate. The recommended pressure for your JOBE Inflatable SUP is 18-20 PSI.
   • Regularly check and adjust the air pressure, as it can be affected by environmental factors. Following these guidelines will help ensure your JOBE Inflatable SUP is properly inflated for optimal performance and safety on the water.