How do I correctly fold sheet metal using the Wiltec 61574 Manual Folder?

[VonRicardo]

Folding sheet metal with the Wiltec 61574 Manual Folder is straightforward when following these steps. First, securely mount the frame to a workbench using suitable bolts (not included). Next, assemble the handle balls to the handle levers, and connect the levers to the frame as illustrated. Before you start, use a scriber (not included) to mark a straight folding line on your metal sheet. Position the sheet on the carrier plate, aligning the marked line under the folding panel, and ensure the wider base of the pressure plate sits above the material. It's a good practice to test the process on a scrap piece of metal to fine-tune your technique. Use clamps or tensioning tools (not included) to secure the pressure plate and prevent movement. Then, lift the handle levers to achieve the desired fold angle, always keeping your fingers clear of the carrier plate and moving parts. Remember, the handle levers are designed for use only during folding. After folding, remove the pressure plate, clean the surface, and wipe down the press brake. Finally, store the Wiltec 61574 in a safe, dry place, away from children.