Connecting your MiBoxer FUT039W RGB+CCT LED Controller to your smartphone app allows for convenient control and customization of your LED lighting. Here's a step-by-step guide:
- Download the App: Begin by downloading and installing either the "MiBoxer Smart" app or the "Tuya Smart" app from the Apple App Store or Google Play Store.
- Power Up & Check the Indicator: Ensure the MiBoxer controller is connected to a power supply. The indicator light should be flashing rapidly (twice per second).
- Initiate Fast Flashing (If Needed): If the indicator light isn't flashing quickly, you'll need to put the controller into pairing mode. You can do this in one of two ways:
- Long-press the "SET" button on the controller until the indicator light starts flashing rapidly.
- Power the controller off and on three times in quick succession.
- Connect to Wi-Fi: Make sure your smartphone is connected to your home Wi-Fi network, and that the network operates on the 2.4GHz frequency.
- Add the Device in the App: Open the app and tap the "+" button in the upper right corner of the home screen.
- Select the Controller Type:
- In the MiBoxer Smart app, choose "WiFi Lighting" and then select "LED Controller."
- In the Tuya Smart app, select "Lighting" and then "Light Source (BLE+Wi-Fi)."
- Follow the App Prompts: The app will guide you through the remaining configuration steps. Follow the on-screen instructions to complete the connection process.
By following these steps, you will successfully connect your MiBoxer FUT039W RGB+CCT LED Controller to your smartphone app.