How do I connect the Draper 22108 diesel transfer pump to a power source?

[JulianAnn]

Connecting your Draper 22108 12/24V Diesel Transfer Pump to a power supply safely and effectively involves a few key steps.

First, prioritize safety. Place the pump on a stable, level surface and ensure the trigger is not engaged. Work in a well-ventilated area.

Next, connect to your power source:

1. Battery Connection:

   • Connect the negative (-) battery connector (black) to the negative terminal of your battery.
   • Connect the positive (+) battery connector (red) to the positive terminal of your battery.
   • Ensure your battery provides at least 40Ah of power or greater for optimal pump performance. A fully charged battery is recommended.

2. Important Precautions:

   • Avoid contact between the connectors and terminals of opposite polarity once connected to the power source.
   • Confirm the power source voltage matches the pump's rating (12V or 24V).

To operate the pump:

1. Switch the on/off switch to the "on" position after connecting to power.
2. The pump is self-priming; this process may take up to a minute.
3. Insert the nozzle into your receiving tank and squeeze the trigger to begin the transfer.

To stop the pump:

1. Press the on/off switch to the "off" position as soon as the liquid flow ceases.
2. Adhere to the pump's maximum run time to prevent any damage.

Additional Safety Tips:

• Always turn the on/off switch to the "off" position before connecting or disconnecting the power supply.
• Clean up any diesel spills immediately to avoid accidents and environmental concerns.
• Never operate the pump with wet hands.
• Always wear appropriate eye protection when using the pump.

By following these instructions, you'll be able to connect and operate your Draper 22108 diesel transfer pump safely and efficiently.