Pairing your Ajax MotionProtect Curtain with your Ajax hub is straightforward. Here's a step-by-step guide: First, ensure your Ajax hub is powered on and connected to the internet, either through Ethernet or GSM. Next, install the Ajax app on your smartphone, create an account, and add your hub. Make sure you've set up at least one room within the app. Before pairing, confirm the hub is disarmed and not updating in the app. Only users with administrator privileges can add devices. To pair the MotionProtect Curtain, start by naming the device in the app. You can scan the QR code located on the back of the detector or on its packaging, or manually enter it. Then, select the room where the detector will be placed and tap "Add." A countdown will begin. Now, activate the MotionProtect Curtain by holding its power button for 3 seconds. The detector should be within the hub's wireless range. The hub will attempt to connect within 6 seconds of the detector being turned on. You don't need to turn the detector off to retry the process. If the MotionProtect Curtain has previously been connected to another hub, turn it off first. Then, follow the standard pairing steps as described above. After successful pairing, the detector will appear in the app's hub device list. The frequency of status updates depends on the polling interval configured in the hub settings, which is typically set to 36 seconds by default. If motion is detected before the system is armed, an alarm will be triggered during the next polling cycle. Following these steps ensures seamless integration of your Ajax MotionProtect Curtain with your Ajax security system.
