Connecting your SAL 200BT Multimedia Speakers to your devices is straightforward. Here's a step-by-step guide:
-
Safety First: Before you start, disconnect the speaker system from the power outlet.
-
Power Down: Ensure both the SAL 200BT speakers (with the tilt switch at the back in the OFF position) and the devices you intend to connect are turned off.
-
Passive Speaker Connection: Locate the +/- marked speaker output jack (RIGHT OUTPUT) on the back of the active sound box. Connect the passive sound box cable. The plug only fits one way; gently push it in until it clicks.
-
Power Up: Plug the speakers back into the mains and switch on the rear tilt switch. Then, turn on the system using the ON/OFF button on the front panel or the remote control.
-
Input Selection: Press the INPUT button to choose your desired input source. Options include FM RADIO, USB or SD for music playback, Wireless BT for Bluetooth, and AUX for wired audio input.
-
Bluetooth Connection: If you're connecting via Bluetooth, select the BT function using the INPUT button. Place your Bluetooth-enabled device within 10 meters of the speakers and follow the pairing instructions in your device's operating manual.
-
Wired Connections: For devices with headphone or audio outputs, use the AUDIO INPUT RCA sockets on the sound box. Ensure the volume and tone settings on your external device are correctly adjusted for optimal sound quality.
-
Microphone Usage: If you plan to use microphones, connect them to the MIC1 and/or MIC2 jacks. Adjust the microphone volume using the MIC VOL control on the remote.
Following these steps will help you enjoy your SAL 200BT Multimedia Speakers with your favorite devices.
