Pairing your Fosmon C-10683 WavePoint Wireless Remote Control with its receiver is straightforward. Here's a step-by-step guide:
- Remote Battery Insertion: Open the battery compartment on your remote and insert one CR2032 battery. Ensure the positive (+) side faces upwards.
- Remote Function Test: Press the ON/OFF button on the remote. The LED indicator should illuminate. If it does, your remote is ready.
- Receiver Power Up and Pairing Mode: Plug the receiver into a standard 3-prong AC outlet. The receiver's LED will begin to flash slowly, indicating pairing mode is active.
- Pairing the Remote: While the receiver's LED is slowly flashing, press the ON/OFF button on the remote once. The devices should now be paired. Note: The receiver will exit pairing mode after a successful pairing or after approximately 29 seconds.
- Operation Check: Use the ON/OFF button on the remote to test if the receiver responds correctly.
To unpair your Fosmon remote and receiver, follow these steps:
- Initiate Unpairing Mode: Unplug the receiver from the outlet, then plug it back in. The receiver's LED will slowly flash, indicating pairing mode.
- Unpairing Command: Press and hold the ON/OFF button on the remote for 3-4 seconds. The receiver's LED should flash rapidly for 3-4 seconds.
- Complete Unpairing: Unplug the receiver. The remote and receiver are now unpaired.
For more detailed information and safety precautions, please consult the Fosmon C-10683 WavePoint Wireless Remote Control user manual.