How do I configure my BIGtec AC15-WT02 WiFi Range Extender?

[LaOlive]

Setting up your BIGtec AC15-WT02 WiFi Range Extender is simple. Follow these steps:

1. Ensure your primary WiFi router is powered on and broadcasting a signal.
2. Plug the BIGtec AC15-WT02 into a power outlet. Place it within range of your existing WiFi network, ideally where the signal from your router is still strong.
3. Allow the extender to power on. Observe the LED indicators; they will show the signal strength.
4. On your computer or mobile device, go to your WiFi settings and connect to the network named "BIGtec_EXT."
5. Open a web browser and type "http://ap.setup" or "http://192.168.10.1" in the address bar, then press Enter.
6. You'll access the extender's setup page. Follow the prompts.
7. Select your preferred language and proceed to the next step.
8. Choose your desired mode: "Repeater Mode," "AP Mode," or "Router Mode." Select the appropriate mode for your setup and continue.
9. The extender will scan for available WiFi networks. Choose your home WiFi network from the list.
10. Enter your home WiFi network's password.
11. You can customize the extended WiFi network's SSID (network name) and password here, or keep the original settings. Make any necessary changes.
12. Review your settings and click "Apply" to save the configuration.
13. The extender will restart, which may take a few minutes.
14. Once the extender restarts, it's connected to your existing WiFi network. You can now connect your devices to the extended WiFi network.

For more detailed instructions, including illustrations and troubleshooting tips, consult the user manual that came with your BIGtec AC15-WT02 WiFi Range Extender.