···
Log in / Register

How do I clean my Ninja NJ110GR Express Chop food processor?

1Answers
HaleyAnn
12/17/2025, 09:36:57 AM

Cleaning your Ninja NJ110GR Express Chop is straightforward. Follow these steps for the best results: Hand-Washing: Wash the container, lid, and Ninja Chopping Blade Assembly in warm, soapy water. When washing the blade assembly, use a utensil with a handle to avoid direct contact with the blades. Rinse all parts thoroughly and let them air dry completely. Dishwasher: The container, lid, and Ninja Chopping Blade Assembly are dishwasher safe. Place the lid and blade assembly on the top rack. Always remove the blade assembly from the container before putting it in the dishwasher. Power Pod: DO NOT submerge the power pod in water or any other liquid. Clean it by wiping with a damp sponge or cloth, then dry it thoroughly. Important Safety Notes: Never immerse the power pod in any liquid. Handle the Ninja Chopping Blade Assembly with caution to avoid contact with the sharp blades. For additional help, consult the user manual or contact SharkNinja Customer Service at 1-877-646-5288.

Was this review help?
106
Share
More Q&A

1941 d/d nickel

The term "1941 d/d nickel" refers to a specific and recognized die variety of the 1941 Jefferson Nickel produced at the Denver Mint. The "d/d" notation signifies a "D over D" repunched mintmark (RPM). This error occurred during the die preparation process when the 'D' mintmark was punched into the working die more than once, with the impressions slightly offset. This results in a noticeable doubling or overlapping of the 'D' mintmark on the finished coins. The standard 1941-D Jefferson Nickel is a very common coin in its own right, with a substantial mintage of 53,432,000 pieces. Composed of 75% copper and 25% nickel, it is readily available in circulated grades and lower uncirculated, or mint state, conditions. However, the coin becomes significantly scarcer in higher grades, particularly MS-67 and above, and is especially elusive with the "Full Steps" designation, which indicates a sharp, complete strike on the steps of Monticello on the reverse. The "D over D" is considered a major variety for the 1941-D issue. While the base coin is common, this specific variety carries a premium for collectors due to its numismatic interest. The value of a 1941 d/d nickel is highly dependent on its overall condition, or grade, and the prominence and clarity of the repunched mintmark. Collectors actively seek out these varieties, making them a noteworthy find within the Jefferson Nickel series.
106
Share

when were nickels made out of silver

Based on established numismatic information, United States nickels were produced with a silver composition for a specific period during World War II. The years for these silver-alloy nickels are from 1942 to 1945. The change in metallic composition was a direct result of the war effort. Nickel was a critical and strategic material required for armor plating and other military applications. To conserve this metal, the United States Congress authorized a change in the five-cent piece's alloy. The new composition consisted of 56% copper, 35% silver, and 9% manganese. This was a significant departure from the standard 75% copper and 25% nickel alloy used for the coin before and after this period. These particular coins, often referred to as "war nickels," are easily identifiable by the large mint mark (P, D, or S) placed prominently on the reverse side, directly above the dome of Monticello. This was the first time the Philadelphia mint used a "P" mint mark on a coin. After the war concluded, the U.S. Mint reverted to the original copper-nickel composition in 1946, ending the production of silver-content nickels. It should be noted that the provided search result text was insufficient for formulating this answer.
105
Share

1941 p nickel value

The value of a 1941 Jefferson Nickel minted in Philadelphia is highly dependent on its physical condition or grade. Due to a very large mintage of over 203 million, these coins are extremely common in circulated condition. For a coin that shows signs of wear from being used as currency, the value is quite low, typically ranging from its face value of five cents up to approximately 32 cents for a coin in "Good" condition. Most examples found in pocket change will fall into this category. For uncirculated coins that were never used and retain their original mint luster, the value increases significantly. The specific grade of the uncirculated coin determines its worth to collectors. A lower-end uncirculated coin, such as one graded Mint State 60 (MS-60), might be valued at around $2.69. As the condition improves, the value climbs, with an MS-65 example being worth approximately $16. A real-world example from an eBay listing shows a 1941-P nickel graded MS-66 by PCGS being offered for sale at $29.99, which aligns with these valuation tiers. A critical factor for collectors that can dramatically increase the coin's value is the presence of "Full Steps" on the depiction of Monticello on the reverse. A coin with a sharp, clear strike showing all six steps is considerably rarer and more sought after. A 1941 nickel graded MS-65 with Full Steps can be worth around $148, a significant premium over a standard MS-65 coin. This value can escalate to over $4,000 for exceptionally well-preserved specimens in the highest grades, such as MS-67 with Full Steps. Therefore, while most 1941-P nickels have minimal value, pristine examples with specific characteristics can be quite valuable.
104
Share

1941-d nickel

The 1941-D Jefferson nickel is a common date coin produced by the Denver Mint with a high mintage of 53,432,000. As a result of this large production, the coin is abundant and easily obtainable in circulated grades. It is also quite plentiful in uncirculated conditions up to the grade of MS 66. The most significant characteristic for collectors of the 1941-D nickel is its strike quality. This issue is well known for being weakly struck, which is particularly evident in the central design details on the reverse of the coin. The steps on Monticello are frequently mushy and lack clear definition, making sharply detailed examples very difficult to find. Because of the prevalent weak strike, specimens that qualify for the "Full Steps" (FS) designation are considered rare. To receive this designation, a coin must exhibit at least five distinct and separated lines on the steps of Monticello. For the 1941-D, a Full Steps example is a significant condition rarity and commands a substantial premium in the numismatic market. While the coin is common in lower grades, it becomes scarce in MS 67 and exceedingly rare in higher grades, especially with the Full Steps detail. While some minor doubled die varieties exist for this date, they are not widely sought after by collectors, whose primary focus remains on strike quality.
113
Share

1942 d/s nickel

Hello there! That's a great question about a very interesting and popular collector's coin. The "1942 D/S nickel" refers to a specific error variety of the Jefferson nickel known as an overmintmark. This special coin was created when a die originally intended for the San Francisco Mint (with an "S" mintmark) was instead sent to the Denver Mint. There, a "D" mintmark was punched on top of the "S," creating the unique D/S appearance that collectors look for. The information you found from Littleton Coin Company is helpful context. It correctly notes that 1942 was a transitional year for nickels due to World War II. The D/S overmintmark error is found on the earlier Type 1 nickels, which were made of the standard 75% copper and 25% nickel composition. Later in the year, the U.S. Mint began striking "wartime" nickels with a silver alloy to conserve nickel for the war effort. These later nickels have a large mintmark placed above Monticello on the reverse. Because the 1942 D/S is a recognized and sought-after error, it is more valuable than a regular 1942-D nickel. Its value can range significantly depending on the coin's condition and how clearly both mintmarks can be seen. The provided search results don't specifically detail this D/S variety, but they rightly highlight 1942 as a historic year for the Jefferson nickel.
112
Share

1942 d/d nickel

The 1942 D/D Jefferson Nickel is a notable die variety in American numismatics. The designation refers to a specific type of error known as a repunched mint mark (RPM). In this case, the "D" mint mark, indicating the coin was struck at the Denver Mint, was improperly punched into the die used to strike the coins. More specifically, this variety is known as the "D over Horizontal D." During the die preparation process, a "D" was first punched into the die on its side, in a horizontal orientation. This mistake was then corrected by punching another "D" in the proper vertical orientation over the first impression. On the finished coins, remnants of the underlying horizontal "D" are visible next to the primary, correctly oriented mint mark. This specific error is a well-documented and popular variety among collectors. It is officially cataloged as FS-501, a designation from the Cherrypickers' Guide to Rare Die Varieties, which is a standard reference in the field. The inclusion of this coin in major references like the PCGS CoinFacts guide confirms its significance and collectibility within the Jefferson nickel series. It is a distinct error that is sought after by specialists in die varieties.
118
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.