How do I change the chlorine output on my CONTROLOMATIC SmarterSpa?

[DaniellaMarie]

Adjusting the power level on your CONTROLOMATIC SmarterSpa saltwater chlorine generator lets you control how much chlorine it produces. Here's how: First, press the Up and Down buttons simultaneously on the control box. The White light will illuminate, indicating you're in power change mode. To increase the chlorine output (power level), press the Up button. The Green (Salt High) light will flash with each press. The power level goes from 1 to 10, with 1 being the lowest and 10 the highest. To decrease the power level, press the Down button; the Red (Salt Low) light will flash. Once you reach your desired power level, don't press any buttons for three seconds. The White light will then flash the new power level to confirm the change. The power level setting affects how long the CONTROLOMATIC SmarterSpa operates during each chlorine generation cycle, so higher levels mean more chlorine. Here's a general guide: Level 1 runs for 30 minutes, Level 2 for 1 hour, Level 3 for 2 hours, Level 4 for 3 hours, Level 5 for 4 hours, Level 6 for 5 hours, Level 7 for 6 hours, Level 8 for 7 hours, Level 9 for 8 hours, and Level 10 for 9 hours. Start with a lower setting and adjust based on your spa's chlorine levels. Regularly test your water's chlorine and pH levels to keep your spa water balanced and clean.