Converting your Bosch NGMP077UC gas cooktop from natural gas to propane requires careful attention to detail. Here's how, following the manufacturer's guidelines:
-
Converting the Pressure Regulator:
- Find the pressure regulator, usually on the bottom right end of the appliance.
- Remove the hexagon-shaped conversion cap, being careful not to lose the gasket or spring.
- Grip the plastic orifice stem and pull it out of the cap, rotating it 180 degrees.
- Ensure the stem is correctly oriented, then snap it back into the cap.
- Reattach the hexagon cap securely to the regulator.
-
Replacing the Orifices:
- Take off all burner grates, caps, and bases.
- Use a 7 mm socket wrench to replace the natural gas orifices with the LP gas orifices. The burner chart in your manual will specify the correct orifices.
- Tighten the new orifices properly to prevent leaks.
-
Adjusting the Gas Valves:
- Turn the control knobs to the off position and remove them.
- Take off the white rings under the control knobs to access the setting screws.
- Use a T10 star bit screwdriver to adjust the setting screws. Follow the LP gas settings in the burner chart.
- Put the white rings and control knobs back in place.
Always consult your Bosch NGMP077UC's instruction manual for specific diagrams and details. If you have any difficulties or questions, please refer to the manual or contact Bosch customer service.