Binding the DJI Air Unit to your transmitter is essential for operating your GEPRC CineLog25 HD Runcam Link Wasp CineWhoop drone. Here's how to do it. If you purchased the GEPRC CineLog25 drone as a complete kit (including the goggles and transmitter), the binding is usually pre-configured at the factory. However, if you bought the drone separately, you will need to bind the Air Unit with both your DJI goggles and transmitter before you can fly. First, let's bind the Air Unit to the goggles: Power on your goggles, transmitter, and drone. On the goggles, press the bind button twice. You should hear a sound indicating the goggles are in bind mode. Now, locate the bind button on the Air Unit and press it. The indicator light on the Air Unit will change from green to red, signaling the binding process. Once the Air Unit indicator light turns back to green, and you see the video feed in your goggles, the binding is successful. Next, bind the Air Unit to the transmitter: On the transmitter, simultaneously long-press the recording key, custom key C, and the right wheel key. You'll hear a sound, and the status indicator LED will turn blue and flash slowly, indicating bind mode. Press the bind button on the Air Unit again. The indicator light will change from green to red. Finally, when the transmitter indicator light turns from blue to green, and the Air Unit's light goes back to green, the binding is complete. You should now be able to control your GEPRC CineLog25 HD Runcam Link Wasp drone. For more detailed instructions or if you encounter any issues, please consult the GEPRC CineLog25's user manual, or contact GEPRC customer support.
