How do I balance my binoculars on the BRESSER 4964180 SLIDER Mount with a Tripod?

[McReese]

Balancing your binoculars on the BRESSER 4964180 SLIDER Mount is key for steady viewing. Here's a step-by-step guide:

1. Mounting Your Binoculars:

   • Check that your binoculars have a tripod connection. If not, use an adapter.
   • Attach the binoculars (with or without an adapter) to the mount's 1/4" connection thread.
   • Ensure the binoculars are centered on the adapter.

2. Using Counterweights:

   • Attach the provided counterweights to both sides of the locating pin.
   • Slide the safety clamps onto the locating pin to keep the counterweights in place.
   • Make sure the fuse clamps are correctly installed on the retaining bolts to prevent the counterweights from falling.

3. Using a Sandbag (Optional):

   • Fill the sandbag with sand or stones and seal it tightly.
   • Attach the sandbag's loop to the hook on the pick-up bolt.

4. Adjusting Friction Screws:

   • Use the friction screws on the mount to control movement (horizontal, elevation, zenith, tilting).
   • Adjust each friction screw clockwise or counterclockwise to achieve your desired mobility for each direction.

Following these steps ensures a balanced setup, allowing for stable and enjoyable observations with your BRESSER 4964180 SLIDER Mount.