Adjusting the hanging length of your Progress Lighting P550132-031 Two-Light Wall Lantern in Textured Black involves these steps, as per the instruction manual: First, figure out your desired hanging length. You can do this by removing chain links (GG) and trimming the electrical and ground wires to the appropriate size. It's best to wait until you've determined the final length before cutting the wires. Make sure to leave at least six inches of wire extending past the chain holder (EE) to give yourself room to make the connections. Next, open a chain link at one end of the chain (GG) and attach it to the chain loop (B), then close the chain link securely with pliers. Attach the other end of the chain (GG) and the chain holder (EE) to the quick link (1) and close the quick link. Now, thread the wires through every third chain link (GG) and then through the collar (DD) and canopy (HH). Strip 3/8 inch of insulation from the ends of the electrical wires. Connect the ribbed fixture wire to the white supply wire and the smooth fixture wire to the black supply wire using wire nuts (BB). Also, connect the fixture ground wire and the supply ground wire. Finally, tuck the wires neatly into the junction box, slide the canopy (HH) over the chain holder, and screw the collar (DD) onto the chain holder to secure the canopy tightly against the wall or ceiling. Following these steps ensures your Progress Lighting P550132-031 Two-Light Wall Lantern is installed correctly.
