To wire a two-rocker switch for your Broan BCSM1 residential range hood while adhering to ADA guidelines, follow these steps. Always ensure you disconnect power at the service panel and lock the disconnecting means to prevent accidental activation before commencing any electrical work. This task should be performed by a qualified electrician.
-
Prepare the Hood:
- Remove the range hood filters and set them aside.
- Remove the wiring cover retaining components and carefully slide the wiring cover off the hood. Store the components for later reassembly.
-
Detach the Blower Chamber:
- Using an 11/32" socket, remove the six nuts securing the blower chamber to the hood assembly.
- Unscrew the two front corner screws using a Phillips #2 screwdriver.
- Carefully detach the blower chamber from the hood assembly. Keep the screws and nuts safe.
-
Wire the Switch:
- Unplug the blower connector from the main harness.
- Remove the front screws securing the bent plate to the hood and fold the bent plate back to expose the control panel connections.
- If your power cable enters the hood, use a 14/3 cable to connect the switch to the range hood. Remember to color the white wire insulation at both ends for identification.
- Install the new two-rocker switch in a user-friendly location, keeping in mind ADA accessibility requirements.
-
Finalize the Installation:
- Double-check all wiring connections to ensure they are secure and away from any halogen lights, if present.
- Carefully reinstall the blower chamber, wiring cover, and the filters.
- Restore power and thoroughly test the two-rocker switch control to verify proper operation.
Important Reminder: All electrical wiring and installation must be performed by qualified professionals and comply with all applicable electrical codes and standards. Prioritize safety by wearing safety glasses and gloves throughout the installation process.
