How can I replace the blade on my BORMANN PRO BCS2350 Disc Saw?

[GabriellaAnn]

Changing the blade on your BORMANN PRO BCS2350 Disc Saw is a straightforward process. Here's how to do it safely and effectively:

1. Safety First Disconnect Power: Before anything, unplug the BORMANN PRO BCS2350 Disc Saw from the power outlet.
2. Prepare the Saw: Place the saw on a stable, flat surface. Consider setting the base plate to a minimum depth cut for easier access to the blade.
3. Engage the Spindle Lock: Locate the spindle lock button on your saw (refer to your manual if needed). Push and firmly hold the spindle lock button towards the motor housing.
4. Remove the Old Blade: Using the wrench that came with your BORMANN PRO BCS2350, turn the blade clamp bolt counter-clockwise to loosen and remove it. Take off the blade clamp bolt and the outer flange.
5. Access the Blade: Use the lower guard lever to raise the lower guard. This will allow you to safely remove the old saw blade.
6. Install the New Blade: Clean the saw blade flanges. Place the new blade onto the output spindle, ensuring it sits against the inner flange. Pay close attention to the direction of the blade teeth and the arrow on the blade itself, aligning them with the arrow on the lower guard.
7. Reassembly and Test: Reinstall the outer flange and tighten the blade clamp bolt securely. Once tightened, manually rotate the blade by hand to confirm it spins freely. Your BORMANN PRO BCS2350 Disc Saw is now ready with a new blade.