
To ensure peak performance from your GARMIN External Iridium Satellite Communication Antenna when installing it on your vehicle, follow these guidelines. First, carefully choose the antenna mounting location, making sure it has a clear, unobstructed view of the sky in all directions. This is key for receiving strong signals. Avoid mounting the antenna near the engine or other sources of electromagnetic interference (EMI), as this can disrupt the signal. Also, maintain a minimum distance of at least 5 cm (2 in.) between antennas if you're installing multiple antennas. Safety is paramount, so always wear safety goggles, ear protection, and a dust mask during any drilling, cutting, or sanding. When drilling, double-check the opposite side of the surface to prevent vehicle damage. For the installation steps: Use the included bracket as a template to mark pilot hole locations, drilling 3.2 mm (1/8 in.) pilot holes if needed. Secure the mounting bracket with the provided screws. Place the magnetic Iridium antenna in the mounting bracket. Route the antenna cable into the vehicle and towards the mount. Insert the External Iridium Antenna connector through the corresponding hole in the mount, securing it with the adapter and xxxx (details in the product manual). Finally, connect the External Iridium Antenna cable to the mount's connector and tighten the collar around the connected cables. By following these steps and precautions, you'll maximize the performance and accuracy of your GARMIN External Iridium Satellite Communication Antenna.


