Maintaining your Bonsaii C169-B 14-Sheet Cross Cut Shredder is key to its longevity and efficient operation. Here's a breakdown of essential maintenance tasks, as outlined in the instruction manual:
-
Lubrication: To keep the blades sharp and reduce friction:
- Plug in the shredder and switch from OFF to AUTO.
- Feed one shredder lubricant pack into the shredder.
- Move the control panel to Reverse for 2-3 seconds.
- Switch back to AUTO to shred the lubricant pack for 3-5 seconds.
- Repeat these steps 2-3 times until the pack is fully shredded.
- Finally, set the shredder to Off.
-
Cleaning: Keep your shredder free of debris:
- Avoid using flammable liquids, gases, water, or cleaners.
- Take care not to touch the sharp cutting edges.
- Regularly clean the shredder to remove dust and paper particles.
-
Jam Clearing: Address jams promptly:
- If a jam occurs, switch from AUTO to REV.
- The Power Light will illuminate red, signaling a jam.
- Remove the jammed paper.
- Repeat if the jam persists.
-
Overheat/Overload Prevention: Prevent damage from overuse:
- If the Overheat or Overload lights (red) are on, allow the shredder to cool down or remove excess paper.
-
General Care: Ensure safe and effective operation:
- Always use the shredder head with the provided basket.
- Avoid overloading the shredder beyond its 14-sheet capacity.
- Keep children, pets, hands, clothing, and hair away from the shredder to prevent accidents.
Following these guidelines will help ensure your Bonsaii C169-B 14-Sheet Cross Cut Shredder remains in top working condition.
