···
Log in / Register

do they still make canadian silver dollars

1Answers
AlexisFitz
12/01/2025, 02:21:12 AM

That's a great question! The answer is a bit of a yes and a no, depending on what kind of coin you're talking about.

Canada no longer makes silver dollars for general circulation, the kind you would get as change in a store. The original Canadian silver dollar, which was made of 80% silver, was minted for circulation from 1935 until 1967. After that, in 1968, the composition of the dollar coin was switched to nickel.

However, the Royal Canadian Mint does still make silver dollars for collectors! Starting in 1971, the Mint began issuing special commemorative silver dollars every year. These coins are considered non-circulating legal tender and are made specifically for the collector's market, often to celebrate important Canadian events or themes.

So, while you won't find any new silver dollars in your pocket change, the tradition of the Canadian silver dollar continues for collectors and enthusiasts.

Was this review help?
107
Share
More Q&A

What safety steps and installation tips should a pool owner know when installing the HYDREL Underwater 4415 LED fixture?

Installing the HYDREL Underwater 4415 LED fixture in your pool requires attention to safety and adherence to specific guidelines. To ensure a safe and successful installation, consider these key points: First, always have a qualified, licensed electrician handle the installation and any servicing. This ensures compliance with all electrical codes. Regular maintenance is recommended, including cleaning the refractor or lens as needed, dependent on environmental dirt levels and personal preference. Always disconnect or turn off the power supply before beginning any installation or service work to prevent electrical shock. Verify that the voltage of your power supply matches the specifications listed on the fixture’s label before making any electrical connections. All electrical and grounding connections must adhere to the National Electrical Code (NEC) and any local codes; use UL-approved wire connectors. When handling the fixture, wear gloves and safety glasses to protect yourself from injury. Avoid direct eye exposure to the light source to prevent potential eye damage. Do not connect components while they are under load, and be careful not to damage the wire insulation when mounting or supporting the fixture. Ensure that the fixture has adequate ventilation and that airflow is not restricted to prevent overheating. Finally, always consult the specific installation instructions provided with your HYDREL fixture for any additional warnings or regulatory statements. Following these guidelines will help ensure the safe and proper installation of your HYDREL Underwater 4415 LED fixture.
118
Share

What's the right way to install a Spence FTE Series Float and Thermostatic Steam Trap?

Installing your Spence FTE Series Float and Thermostatic Steam Trap correctly ensures optimal performance. Here's a step-by-step guide: Positioning and Orientation: Place the trap in an easily accessible location for maintenance. Make sure the float direction is pointing downwards during installation. Install the trap vertically and level for proper operation. Flow Direction and Equipment Proximity: Confirm the flow direction using the arrow on the trap body and the float direction using the arrow on the nameplate. Position the trap below and close to the equipment it's draining to minimize horizontal piping. Piping Considerations: Angle all horizontal inlet lines towards the steam trap to prevent water hammer. Incorporate a dirt pocket and strainer with a blowdown valve upstream of the trap. Use union fittings and shut-off valves on both sides of the trap for easy servicing and testing. Testing and Maintenance: Install a test valve on the outlet pipe and cap it for testing. Before use, blowdown the piping with full steam pressure for five minutes to clear any debris. Perform maintenance and cleaning shortly after startup (2-3 days), and then every 6-12 months during regular use. Following these steps helps maintain the effectiveness and lifespan of your Spence FTE Series Float and Thermostatic Steam Trap. For more detailed instructions, always consult the official installation guide included with your product.
113
Share

How can I verify the correct installation of DOUG'S HEADERS D200 on my Buick Regal 350?

Ensuring the proper installation of your DOUG'S HEADERS D200 1 3/4 Inch 4-Tube Full Length Header on your Buick Regal 350 is crucial for optimal performance and longevity. Here's a step-by-step guide based on the provided installation instructions: Fitment Check : Begin by confirming that the headers align seamlessly with your engine and chassis. Look for any obstructions involving vital components such as brake lines, transmission lines, or fuel lines. Bolt Tightening : Properly tighten all header bolts to the manufacturer's torque specifications. Start by gently tightening the bolts and then move to a crisscross pattern, beginning from the center and working outwards. Seal Inspection : Make certain the gaskets are correctly positioned and that the sealing beads on the headers form a secure seal, preventing any leaks. Component Reassembly : Reinstall any components that were removed during the installation. This includes parts like the dipstick tube, chassis support rods, starter, air cleaner heat stove, and any hoses. Post-Installation Inspection : Once the engine is running, let it reach operating temperature. Listen for unusual sounds or exhaust leaks. With the engine still warm, retighten all bolts. Regular bolt checks are recommended to prevent loosening. By carefully following these steps and consulting the detailed instructions included with your DOUG'S HEADERS D200, you can be confident that your headers are correctly installed, ensuring your Buick Regal 350 performs at its best.
118
Share

How do I install the GE Current HORT179 Next-Gen indoor lighting system?

Installing your GE Current HORT179 Next-Gen indoor lighting system is essential for optimal plant growth. Here's a simplified step-by-step guide to get you started: Mounting Your Fixtures: Use the provided mounting brackets to securely attach the fixtures to your desired location. Position the lights at the recommended height above your plants for optimal coverage. Connecting the Power Supply: Carefully follow the wiring instructions in the manual to connect the fixtures to the power supply. Ensure all connections are secure and comply with local electrical codes. Adjusting Light Dispersion: Utilize the XW Optic technology to control the light dispersion for wider coverage, especially in spaces with limited headroom. Adjust the position of the fixtures to achieve even light distribution across your growing area, prioritizing crop quality. Optimizing Performance: Choose the right spectrum (Type R, Type B, Type F, Type BR, Type T) based on your plants' needs. Monitor light intensity and adjust the fixtures as required to meet your crops' specific requirements. Maintenance and Troubleshooting: Regularly check your fixtures for any debris or damage that might affect performance. Consult the manual's troubleshooting section for help with any common issues. By following these steps, you can successfully set up and operate your GE Current HORT179 Next-Gen indoor grow lights for efficient and sustainable plant growth.
102
Share

How do I find the right hanging length for the Progress Lighting P500402 5-Light Foyer fixture?

Determining the correct hanging length for your Progress Lighting P500402 5-Light Foyer fixture is crucial for a perfect fit. Here's a step-by-step guide based on the installation manual: First, adjust the stem length according to the fixture canopy depth. Next, attach the mounting plate to the outlet box using the provided screws. Then, lift the fixture and pass the screws through the canopy holes, adjusting the stem length until 3/16" of threads are visible. Remove the fixture and tighten the hex nuts against the mounting plate to secure this length. Now, determine the final hanging length by removing chain links and stems, and optionally trimming the wires, but only after determining the overall length. Connect the fixture wires to the supply wires, ensuring at least 6 inches of wire extend past the canopy loop. Secure the fixture by passing the screws through the canopy and tightening the cylinder nuts. Finally, attach the glass shade using the socket ring and insert the lamps. Following these steps ensures your Progress Lighting fixture is installed at the ideal height.
103
Share

How do I enable and configure Dynamic Power Management (DPM) on my eSolutions Annex ePro Wallbox with the Power Meter?

Enabling Dynamic Power Management (DPM) on your eSolutions Annex ePro Wallbox and integrating it with your Power Meter involves several key steps. Here's a comprehensive guide: Power Meter Installation: Place the provided Power Meter after your main utility meter but before the power distribution split. Refer to the Power Meter's installation manual for detailed instructions on three-phase or single-phase electrical connections. Run the Modbus communication cables (use STP class 5E with a 0.5 mm2 section) from the Power Meter to the ePro Wallbox. Connect these communication cables to the RS485 output port (CN12) on the ePro Wallbox, starting from the left. If applicable, install the Current Transformers according to the meter's manual, ensuring correct line direction through the clamps. Energy Meter Configuration: Access the menu by pressing and holding the central display button (three-phase meter) or the lower part of the display (single-phase meter) until the password prompt appears. Navigate the menu using the left (or upper, for single-phase) display button. Configure the Gavazzi Meter or Finder Meter parameters as specified in their respective manuals. Installer-Level Parameters Configuration: Installers should utilize the Power Up app, available on Google Play and the App Store. You must be a qualified installer to use this app. Pair the app with your ePro Wallbox by scanning the QR code found on the wallbox label. Configure the DPM settings, which includes enabling DPM, setting your contractual power limit, selecting your Power Meter model, and configuring the Current Transformer ratio. User-Level DPM Configuration (eSolutions Charging App): Download the eSolutions Charging App to configure and monitor your wallbox's operating parameters. Associate the wallbox with your user profile by scanning the personal QR code on the wallbox. Set your Contractual Power limit in kW and enable the Home Power functionality within the app. Load Unbalance (If Required): If load unbalance functionality is required based on local regulations (e.g., Germany, Austria, Switzerland, Netherlands), enable this feature. Configure the maximum current phase unbalance setting accordingly. Always ensure that all installation and configuration steps are carried out by qualified personnel and in accordance with all local electrical regulations to ensure the safe and optimal performance of your eSolutions Annex ePro Wallbox with Dynamic Power Management.
103
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.