Can I link multiple power modules to a single Schluter DITRA-HEAT-E-RS1 Smart Thermostat

[RichardDella]

Yes, the Schluter Systems DITRA-HEAT-E-RS1 Smart Thermostat supports the connection of multiple power modules. You can connect up to ten power modules to a single thermostat. Here's how to do it:

1. Use 20 AWG signal or communication wire rated at 300 volts (CL2/CL3 or CM for the USA and CMG/FT4 for Canada).
2. Connect from AUX 1 & 2 on the thermostat to the AUX IN on the first power module.
3. Connect AUX OUT from the first power module to the AUX IN of the next power module, and continue this daisy-chain method for all subsequent modules.
4. Wiring polarity does not matter; there is no need to worry about wire orientation.
5. Secure each power module to the electrical junction box using the provided screws.
6. Once all power modules are connected, replace their covers and tighten the screws.
7. Power on both the power modules and the thermostat. This setup allows you to expand the heating capacity controlled by a single Schluter DITRA-HEAT-E-RS1 Smart Thermostat.