XC60 Maintenance Schedule

1 Answers
DakotaDella
07/29/25 3:58pm
Maintenance is required every 10,000 kilometers. Below are the main aspects of vehicle maintenance: 1. Maintenance isn't as complicated as one might think; it primarily involves replacing wear-and-tear parts and fluids. 2. Regular replacement items for wear-and-tear parts include the fuel filter, oil filter, air filter, cabin air filter, tires, brake pads, brake discs, wiper blades, battery, and spark plugs. 3. Fluids that require regular replacement include engine oil, transmission fluid, coolant, brake fluid, and power steering fluid. Engine oil loses its effectiveness over time, so it needs to be replaced periodically. Failure to change the oil can accelerate engine wear.
Was this review help?
12
4
Share
More Forum Discussions

What is the Difference Between a 1.5L and a 2.0L Car?

1.5L and 2.0L cars differ in their classification: a 1.5L car is classified as a compact sedan, while a 2.0L car is classified as a midsize sedan. Car displacement refers to the volume of fluid a car engine can intake or exhaust per stroke or cycle, and it is an important parameter for measuring a car. The classification standards for cars are primarily based on parameters such as wheelbase, displacement, and weight. The further the letter in the classification sequence, the longer the wheelbase, the larger the displacement and weight, and the higher the luxury level of the passenger car. Car classifications are divided into six levels according to standards: A00, A0, A, B, C, and D.
5
5
Share

How to Use the Manual Mode of Roewe i5 Automatic Transmission?

Roewe i5 automatic transmission manual mode is used by placing the gear lever in the e position, then pushing or pulling it forward or backward to increase or decrease the gear. Pushing forward increases the gear, while pulling backward decreases the gear. Automatic transmission means that while the car is moving, the driver controls the accelerator pedal as needed during the driving process. It can automatically shift into different gears based on the engine load and the car's operating conditions. Taking the 2021 1.5L Manual Platinum Edition Roewe i5 as an example, its body dimensions are 4607mm in length, 1818mm in width, and 1489mm in height, with a wheelbase of 2680mm. It is equipped with a 1.5L naturally aspirated engine and a 5-speed manual transmission.
9
3
Share

Which Practices Can Affect the Lifespan of a CVT Transmission?

Coasting in neutral and suddenly shifting from D to N gear can affect the lifespan of a CVT transmission. Below is a detailed explanation: 1. Coasting in neutral may damage the transmission: Coasting in neutral can potentially harm the transmission. Automatic transmissions rely on hydraulic control, which requires stable hydraulic system pressure. The oil pump's power comes from the engine, and in neutral, the oil pump lacks sufficient power, leading to insufficient oil pressure. When in D gear, oil pressure can reach up to several tens of kilograms per square centimeter, whereas in N gear, it drops to around 25 kilograms per square centimeter. 2. Suddenly shifting from D to N gear can cause damage: If the car is shifted suddenly from D to N gear while driving, the oil pressure drops abruptly, resulting in poor lubrication for the moving and clamping components. This leads to severe sliding friction, which can cause pressure leaks or high temperatures inside the CVT transmission, potentially resulting in significant damage.
5
0
Share

What is the difference between motorcycle license E and F?

Here are the differences between motorcycle license E and F: 1. Eligible vehicle types differ: License E allows driving two-wheeled motorcycles with an engine displacement exceeding 50ml or a maximum design speed exceeding 50km/h. License F permits driving lightweight motorcycles with an engine displacement below 50ml or a maximum design speed not exceeding 50km/h. 2. Driving scope varies: License E holders can operate regular two-wheeled motorcycles and lightweight motorcycles covered by License F, while License F only authorizes driving lightweight motorcycles without other eligible vehicle types. 3. License plate colors differ: License E plates are yellow, whereas License F plates are blue. 4. Examination requirements vary: The test vehicle for License E must be a regular two-wheeled motorcycle with at least four speed gears, while the test vehicle requirements for License F are determined by the provincial traffic management department of public security authorities.
16
1
Share

What is the function of a car's carbon canister solenoid valve?

The function of a car's carbon canister solenoid valve is to adsorb and filter gasoline vapors inside the fuel tank. It controls the entry of fuel vapors into the engine for combustion through the solenoid valve, thereby reducing fuel consumption and preventing excessive fuel tank pressure. A faulty carbon canister solenoid valve not only increases fuel consumption but also affects the normal operation of the car's engine. Methods to check the condition of the carbon canister solenoid valve: 1. If gas sprays out when opening the fuel tank cap, it indicates a damaged solenoid valve; 2. If gasoline vapors or dripping oil appear at the carbon canister's atmospheric vent, it indicates a damaged solenoid valve; 3. Symptoms like poor acceleration, jerking, unstable idle speed (fluctuating high and low), indicate a damaged solenoid valve; 4. If the engine fails to start after stalling or there are abnormal noises while driving, it indicates a damaged solenoid valve.
7
5
Share

What Does a Car Sleeper Look Like?

A sleeper is a berth that allows passengers to lie flat and sleep, essentially serving as a small bed installed within long-distance transportation vehicles. Here are some relevant details: 1. Longitudinal Arrangement: Sleeper berths in passenger vehicles should be arranged longitudinally (aligned with the direction of vehicle movement). The width of each berth should not be less than 450mm, the longitudinal spacing between berths should not be less than 1400mm, and the lateral spacing between adjacent berths should not be less than 350mm. For double-decker sleeper arrangements, the height of the upper berth should not be less than 780mm, and the clearance between berths should not be less than 750mm. 2. During Long-Distance Travel: Avoid carrying excessive cash on your person. It's advisable to bring a portable power bank to prevent being unable to charge your phone if it runs out of battery. During long-distance bus journeys, drink water in moderation.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.