Working Principle of Disc Brakes?

1 Answers
Haven
07/29/25 9:38pm
Here is a detailed introduction to the working principle of disc brakes: Working Principle: During braking, hydraulic oil is pumped into the inner and outer wheel cylinders. Under hydraulic pressure, the pistons push the two brake pads against the brake disc, generating frictional torque to achieve braking. Hydraulic Brake System: Disc brakes are typically hydraulic-type, controlled by hydraulic pressure. The main components include the brake disc, wheel cylinder, brake caliper, and oil pipes. Advantages of Disc Brakes: Disc brakes offer rapid heat dissipation, lightweight construction, simple design, and easy adjustment. Primary Function: To reduce speed or bring the vehicle to a complete stop.
Was this review help?
16
2
Share
More Forum Discussions

What type of transmission is used in the Besturn B90?

The Besturn B90 is equipped with a 6-speed automatic transmission (6AT) across all variants. The AT transmission, also known as a torque converter transmission, connects to the engine via a hydraulic torque converter. Inside the AT transmission, planetary gears are employed to achieve gear shifting and torque variation. This type of transmission offers smooth gear shifts and excellent reliability and durability. The Besturn B90 serves as the premium flagship model under the Besturn brand, with body dimensions of 4860mm in length, 1812mm in width, and 1472mm in height, along with a wheelbase of 2780mm. In terms of exterior design, the newly designed grille enhances the three-dimensional effect and detailed surface treatment, elevating the vehicle's technological appeal while adding a more dynamic touch.
2
1
Share

How to Operate the Gear Shift in a Buick?

When entering this gear, the transmission locking mechanism engages, so the vehicle must come to a complete stop before shifting into it. Engage the reverse gear when the vehicle needs to reverse, noting that the vehicle must first come to a complete stop before shifting into reverse. The neutral position is located after the reverse gear. When shifted into neutral, the vehicle's engine power is not transmitted, typically used for short-term parking. Used when the vehicle is moving forward, the drive gear is located below the neutral position. Manual mode requires the driver to manually shift gears, usually pushing up to shift up one gear and pushing down to shift down one gear. Manual mode can enhance the driving experience.
16
5
Share

Can the Besturn B70 use 95-octane gasoline?

The Besturn B70 can use 95-octane gasoline, which will not cause any damage to the car and is actually beneficial. Different grades of gasoline have varying octane ratings, with higher-grade gasoline having a higher octane rating. Gasoline with a higher octane rating has better anti-knock properties, and engines using gasoline with good anti-knock properties are less prone to knocking. The Besturn B70 is a mid-to-high-end sedan launched by FAW Besturn, featuring a stylish and dynamic design. The car's low-front, high-rear stance, paired with sharp waistlines and multi-spoke sports wheels, exudes a sporty vibe. The vehicle combines aesthetic appeal with practicality, featuring a dynamic fastback body and a dual-exhaust tailpipe design that enhances its robust and powerful appearance.
5
3
Share

Is the engine of the Bestune T77 domestically produced or joint venture?

The engine of the Bestune T77 is domestically produced, independently developed by FAW Group, and performs well in terms of power and fuel economy. The Bestune T77 is equipped with a 1.2-liter turbocharged engine, with a maximum horsepower of 143 hp, a maximum power output of 105 kW, and a maximum torque of 204 Nm. Features of the Bestune T77 engine include: 1. High-efficiency combustion system: Gasoline can fully combust within the engine cylinders, achieving higher low-speed torque while improving fuel efficiency and power output. 2. Integrated exhaust manifold: The engine utilizes an integrated exhaust manifold paired with an efficient turbocharger, allowing it to deliver 204 Nm of torque despite its small 1.2-liter displacement, resulting in more robust power.
11
3
Share

Does a Vehicle Count as Flood-Damaged if the Cabin Isn't Flooded?

Water not entering the cabin does not qualify as a flood-damaged vehicle. Below are methods to identify flood-damaged vehicles: 1. Smell the interior odor: Check if there's a musty smell inside the car. Flood-damaged vehicles often have a musty odor in hidden areas such as under the floor mats, trunk mats, and beneath the seats, which is difficult to eliminate and usually leaves evidence. Be cautious if you detect a musty smell, and also be wary if the interior smells overly fragrant, as this might be an attempt to mask the musty odor. 2. Inspect hidden parts of the vehicle: Look for rust or signs of screw removal and replacement in concealed areas; pull out the seats to check for rust or sand in the tracks; extend the seatbelt fully to see if there are water stains or dirt marks at the end.
5
1
Share

What are the length, width, and height of the new Santana's trunk?

Volkswagen Santana trunk maximum width is 1000mm, maximum depth is 590mm, and height is 590mm. Santana trunk capacity: According to the dimensions, the luggage compartment volume is 466L, but the Santana's rear seats cannot be folded down, so there is a slight deficiency in storage capacity. Santana trunk storage capability: The Volkswagen Santana trunk design is flat, which can be considered a fine tradition of the Volkswagen brand. The inability to fold down the rear seats means there is some deficiency in expansion capability. However, the 466L capacity basically meets daily needs, so the storage capability is entirely sufficient. Moreover, the design is very user-friendly, with good performance in both practicality and space.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.