Within how many kilometers should the first car maintenance be performed?

1 Answers
McCali
07/29/25 11:54pm
Different car manufacturers specify different maintenance intervals, generally the first maintenance is recommended at 3,000 to 5,000 kilometers or within six months. The items for the first car maintenance are as follows: Engine oil and filter replacement: The first car maintenance usually requires changing the engine oil and filter. The purpose of changing the engine oil is to ensure better lubrication for the engine, as the lubricating effect of the oil deteriorates after a period of use, hence the need for replacement. Engine inspection: Check the working condition of the engine, such as whether all pipe connections are normal, if there are any leakage points, whether the engine sounds normal during operation, and if there are any abnormal noises, etc. Brake pads and other inspections: Inspect the wear level of the brake pads and tires. After lifting the vehicle, check if there are any deformations or damages to the chassis caused by collisions or scrapes.
Was this review help?
17
5
Share
More Forum Discussions

How to Deal with Idle Vibration When Turning on the AC in an Accord?

There are various reasons for idle vibration when turning on the AC in an Accord. Here are the specific causes and solutions: 1. Severe carbon buildup in the engine: When there is excessive carbon buildup inside the engine, the gasoline sprayed by the fuel injector during a cold start is largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it more difficult to start. Regularly clean the fuel system, inspect the idle control valve, and clean the throttle body. 2. Ignition system malfunction: Spark plugs are wear-and-tear parts that require regular replacement. If excessive carbon buildup on the spark plugs or excessive ignition gap is found, they should be replaced. Additionally, the wiring should be checked. 3. Oil pressure issue: Simply replace the engine mount bushings.
3
1
Share

Why does the motorcycle stall when shifting gears but can start in neutral?

Motorcycle starts normally in neutral but stalls when shifting gears because the clutch is not fully disengaged. At idle low RPM, it cannot accelerate in time and is dragged to stall by the larger mass of the entire vehicle. Below are precautions for riding a motorcycle: 1. Wear a helmet: Always wear a helmet when riding a motorcycle. Due to the unique nature of motorcycle riding, wearing a helmet is essential to prevent dangers and ensure personal safety. It is recommended to purchase a high-quality helmet for riding safety. 2. Lights: Motorcycle lights are also crucial. Before riding, check the motorcycle lights and use them appropriately during the ride to ensure safety. 3. Brakes: Motorcycle brakes determine the rider's safety. Always inspect the brake cables for any abnormalities before each trip.
18
5
Share

Is it still necessary to affix the vehicle inspection sticker on the windshield?

Vehicle annual inspection stickers no longer need to be affixed. With technological advancements and digitalization, the previous paper-based motor vehicle inspection compliance labels have evolved into electronic certificates, achieving nationwide comprehensive implementation. Therefore, vehicle owners no longer need to attach paper labels to the front windshield of their vehicles. For owners who have obtained the electronic motor vehicle inspection certificate, they can simply present the electronic certificate when encountering traffic police inspections on the road. Precautions during annual inspection: 1. Emissions testing: The annual inspection will check whether the vehicle's tailpipe emissions meet standards. 2. Clean the vehicle body in advance: Owners should wash their vehicles before the inspection. 3. Check lighting: The vehicle management office will inspect the vehicle's lighting system.
3
2
Share

Can the car start if the door is not properly closed?

The car can start if the door is not properly closed, but there will be a voice prompt asking to close a specific door. Below is relevant information about car doors: 1. Design requirements: Ensure convenient passenger entry and exit, with the maximum opening angle controlled at around 65° to 70°. During the opening process, there should be no interference with other parts. The door must lock securely when closed and should not open by itself while driving. 2. Definition: The car door provides an entry and exit passage for the driver and passengers, isolates external disturbances, mitigates side impacts to some extent, and protects the occupants. The aesthetics of the car are also related to the design of the doors. The quality of a car door is mainly reflected in its anti-collision performance, sealing performance, and ease of opening and closing, among other functional indicators. Anti-collision performance is particularly important because, in the event of a side collision, the buffer distance is very short, making it easy for passengers inside the car to get injured.
10
5
Share

What Causes Coolant to Boil?

The reasons for coolant boiling include blockages in the coolant circulation system, insufficient coolant, or radiator malfunctions. Here are the detailed explanations: 1. Blockages in the coolant circulation system: Any blockage or leakage in the entire coolant circulation system can lead to engine overheating and coolant boiling. Immediate repair is necessary upon discovery of such issues; otherwise, it may result in engine bearing failure or piston seizure, significantly increasing repair costs. Solution: Visit a 4S shop for inspection and repair. 2. Insufficient coolant: Coolant naturally decreases over time with use. However, if the coolant level drops too low, cooling efficiency will decline, leading to coolant boiling and even engine overheating. Solution: Promptly replenish the coolant. 3. Radiator malfunction: If the radiator has been damaged and repaired, insufficient cooling surface area can almost certainly cause coolant boiling. Additionally, poor internal flow or obstructed external ventilation in the radiator can also be problematic. These issues, if severe, can affect the engine, causing its temperature to rise as well. Solution: Visit a 4S shop for inspection and repair.
2
0
Share

Does the 9th Generation Accord Have Bluetooth?

The 9th Generation Accord is equipped with Bluetooth. The Bluetooth switch is located on the left front A-pillar of the vehicle body. The Bluetooth device has three buttons: one answer button and two volume buttons. Bluetooth hands-free is also known as car Bluetooth or car hands-free. The Bluetooth technology in the car Bluetooth system is an extension of mobile phone Bluetooth technology and shares the same transmission system. Bluetooth hands-free is an in-car wireless hands-free system designed and developed based on wireless Bluetooth technology. Here is additional information: Bluetooth Features: The function of Bluetooth hands-free is to automatically recognize mobile phones, allowing connection to the phone without the need for cables or phone holders. The owner can control the phone without touching it, even keeping both hands on the steering wheel, using voice commands to answer or make calls. Users can conduct calls through the car's audio system.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.