···
Log in / Register

Will You Fail the Driving Test If You Don't Check the Rearview Mirror in Subject Three?

3 Answers
McCooper
07/29/25 11:03pm
Will You Fail the Driving Test If You Don't Check the Rearview Mirror in Subject Three? Yes, because failing to check the mirror compromises safe driving. Below is relevant information about Subject Three: 1. Introduction to Subject Three: Subject Three, which includes the road driving skills test and the safety and civilized driving knowledge test, is part of the motor vehicle driver's license assessment. It is the abbreviated term for the road driving skills and safety and civilized driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test varies depending on the type of vehicle being licensed. 2. Test Content: The road driving skills test for Subject Three generally includes: preparation before starting, simulated light test, starting, driving straight, shifting gears, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and driving at night.
Was this review help?
14
2
Share
OOmar
08/16/25 12:58am
I think failing to check the rearview mirrors during the driving test (Subject 3) can easily lead to failure, as the examiner pays close attention to your safety maneuvers. When changing lanes, turning, or starting off, they expect you to naturally glance at the mirrors and perform a shoulder check. Missing even once may result in point deductions, and consecutive oversights count as major errors leading to immediate failure. This isn’t just about test rules—it’s crucial for real-world driving safety. Mirrors help spot pedestrians or vehicles in blind spots, preventing dangerous collisions. Having coached many students, I’ve noticed those with bad habits often retake the test due to point losses. My advice: simulate test conditions during practice, consciously checking mirrors before every action until it becomes muscle memory. This ensures smooth test performance and builds confidence by reducing daily driving anxiety.
Was this review help?
3
5
Share
Expand All
VanKiara
10/18/25 6:29am
My friend failed her driving test (Section 3) because she was too nervous and forgot to check the rearview mirror when changing lanes, leading the examiner to immediately stop and fail her. Later, she reflected that those mistakes often happened when starting at traffic lights—she assumed no one was around and skipped mirror checks, but the examiner was sharp-eyed. Now, she sets reminder alarms after every practice lap to force herself to turn and check, which helped her pass the test on the next attempt. In essence, driving tests evaluate safety awareness, and the rearview mirror is the most fundamental tool—neglecting it means exposing yourself to risks. I advise beginners not to rely on luck but to spend a few minutes daily practicing lane-change routines until it becomes second nature. Safe driving isn’t about chance but the accumulation of small, consistent habits.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

Is Wheel Alignment Necessary After Changing Tires?

Wheel alignment is not necessary after changing tires; only wheel balancing is required. Situations that do require wheel alignment include: 1. When the vehicle's steering wheel feels heavy, shakes, pulls to one side, is off-center, or doesn't return to position while driving; 2. Uneven tire pressure and tread wear; 3. Wheel vibration or wobbling; 4. The vehicle pulling to one side. The benefits of wheel alignment are: 1. Enhanced driving comfort; 2. Extended tire lifespan; 3. Improved straight-line stability; 4. Reduced wear on chassis suspension components; 5. Increased driving safety. The principle behind wheel alignment is to adjust the vehicle's four-wheel parameters to ensure optimal driving performance and reliability.
3
5
Share

What are the handling methods for a tire blowout on the highway?

Highway tire blowout handling methods are: 1. Maintain control of the steering wheel and gradually reduce speed; 2. Gradually move the vehicle to the right and stop; 3. Quickly place a warning triangle 100 meters behind the vehicle; 4. Replace with the spare tire and promptly exit the highway. Causes of tire blowouts include: 1. Tire leakage; 2. Excessive tire pressure; 3. Insufficient tire pressure; 4. Severe tire wear. Tire maintenance methods include: 1. Regularly remove debris from tire treads; 2. Periodically check tire pressure; 3. Inspect tire wear and replace when necessary; 4. Promptly repair punctures; 5. Immediately stop and check tire condition if abnormal tire conditions occur while driving.
14
0
Share

What causes abnormal engine noise after an oil change?

The reasons for abnormal engine noise after an oil change are: 1. Overfilling of engine oil; 2. Using oil with inappropriate viscosity. The procedure for changing engine oil is: 1. Start the engine to warm up and bring the transmission to operating temperature; 2. Remove the drain bolt to collect the old oil from the transmission; 3. After draining the old oil completely, remove the oil pan to replace the transmission filter; 4. Reinstall the oil pan and tighten the drain plug; 5. Add new transmission oil; 6. Start the vehicle and shift through all gears; 7. Check the automatic transmission fluid level and adjust if necessary. Precautions for oil change include: 1. Perform the change when the engine is warm to ensure complete drainage of old oil; 2. Add the correct amount of new oil; 3. After adding oil, start the engine to check for leaks, then run the engine for 3 minutes to confirm the oil level reaches the normal mark.
3
5
Share

What is the car depreciation rate?

Car depreciation rates are typically 11% for the first 3 years, 10% from the 4th year onward, and 9% for the subsequent 3 years. Below are the specific details about car depreciation rates: 1. Regulations: The depreciation rate is 11% for the first 3 years, 10% from the 4th year onward, and 9% for the subsequent 3 years. For the first 3 years, the annual depreciation rate is 11%, resulting in a total depreciation of 33% over 3 years. From the 4th year onward, the annual depreciation rate is 10%, leading to a total depreciation of 40%. For the subsequent 3 years, the annual depreciation rate is 9%, resulting in a total depreciation of 27%. According to tax regulations, the depreciation period for passenger cars is 5 years, with a residual value rate of 5%. 2. Impact: The higher the depreciation rate, the worse the vehicle's condition and the lower its residual value.
17
5
Share

What is Section Speed Measurement?

Section speed measurement refers to a method of detecting the average speed of motor vehicles passing through a road section (speed measurement section) between two adjacent speed monitoring points. Functions of the section speed measurement system: By setting up two cameras at two adjacent monitoring points on the same road section, a monitoring and snapshot system is established. This system conducts real-time monitoring and snapshots of vehicles passing through the checkpoint area twice to obtain information such as vehicle speed, traffic flow, license plate number, color, approximate physical dimensions, and driver characteristics. The collected information is then transmitted through a network to the database of the public security traffic command center and traffic control sub-center for data storage, query, comparison, and other processing. Advantages of section speed measurement: High measurement accuracy, stable and reliable speed detection, more comprehensive recorded data. Due to detector limitations, single-point checkpoint devices cannot guarantee 100% image capture of passing vehicles. It offers high measurement efficiency and diverse speed measurement capabilities.
4
1
Share

What is the real reputation of the Haval M6 Plus?

Haval M6 Plus is a car with strong overall performance and balanced capabilities, without any obvious shortcomings. Here is a detailed introduction to the Haval M6 Plus: 1. Largest in-class space: If comparable models are like one-bedroom apartments, then the Haval M6 is a two-bedroom apartment. This analogy is not an exaggeration. Due to adopting the chassis of the first-generation H6, the M6 has a body length of 4664 mm, which is generally more than 12 cm longer than comparable models. 2. Luxurious configurations: Equipped with a wet dual-clutch transmission and double-wishbone independent suspension. It also features practical configurations such as tire pressure display, 360-degree panoramic imaging, auto hold, hill start assist, hill descent control, keyless entry, steering wheel-mounted paddle shifters, and OTA upgrades.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.