Will Water Enter the Chassis When Driving Through Deep Water?

1 Answers
DeKathryn
07/30/25 2:25am
Vehicle driving through water will not cause water to enter the chassis. Impact of driving through water: As long as the water level does not reach half of the wheel, it will not cause water to enter the engine's intake system. If the water level reaches half of the wheel or even higher, the engine, electronic devices, components, and wiring in the car will be affected. Waterlogging insurance: Waterlogging insurance refers to an additional insurance purchased by the car owner for the engine. Waterlogging insurance, also known as commercial vehicle damage insurance or special loss insurance for car engines, is called differently by each auto insurance company but is essentially the same. This is a newly derived insurance type, all referring to the additional insurance purchased by the car buyer for the car engine.
Was this review help?
4
5
Share
More Forum Discussions

Where is the Honda CR-V trunk switch located?

The Honda CR-V trunk switch is located on the left side of the driver's compartment, and there is also a switch on the electric tailgate. Below is some relevant information about the Honda CR-V: 1. Exterior: The new CR-V Plug-in Hybrid version further combines Honda's advanced driving performance, intelligent quality, dynamic design, and cutting-edge technology. The exterior of the new car has been upgraded and comes in four body colors: Starry Night Blue, Crystal Black, Crystal White, and Elegant Gold. The CR-V Sharp Hybrid e+ features blackened headlights connected by a horizontal chrome strip, creating a strong sense of layering. 2. Powertrain: Hybrid Mode: When strong acceleration is needed, the engine power is used for generating electricity, working together with the battery to drive the motor, producing powerful performance. This enables instant acceleration while achieving seamless and smooth power delivery.
5
3
Share

Can ETC be installed at the black dot area?

ETC cannot be installed in the black dotted area. When installing, peel off the protective film of the fixed adhesive and stick it on the front windshield of the car. Of course, avoid sticking it in the black area, as the solar panel will not receive sunlight and cannot charge. ETC working principle: Through the on-board electronic tag installed on the vehicle's windshield, dedicated short-range communication is established with the microwave antenna in the ETC lane of the toll station. Computer networking technology is used to perform background settlement processing with the bank, thereby achieving the purpose of vehicles passing through highway or bridge toll stations without stopping while paying the fees. Where can ETC be installed: For small vehicles such as cars and vans, the ETC card and OBU device are installed in the upper middle part of the front windshield, while for large vehicles such as trucks and buses, the installation position is in the lower middle part.
8
2
Share

What is the process of a full car paint job?

Here is a detailed introduction to the process of a full car paint job: 1. Cleaning and sanding: After scratches or collisions, body repair is usually required to restore the basic shape. Professional paint sanding tools are used to remove the original paint, exposing the metal panels. 2. Filling dents: Applying putty ensures a smooth paint surface and fills in any dents. This process is typically repeated three times, as it directly affects the final paint result. 3. Base preparation: A paint scanner is used to analyze the car's paint, followed by manual fine-tuning. Due to slight variations in paint over different vehicle ages, technicians need to compare paint samples with the car's color on-site. 4. Painting: The main types of paint used are standard paint, metallic paint, and pearl paint.
9
5
Share

What is the reason for no sound when the car audio is connected to Bluetooth?

The reason for no sound when the car audio is connected to Bluetooth is that the volume is not turned on. Here are the relevant details about car Bluetooth: 1. Introduction: Car Bluetooth is a feature equipped in many cars. After connecting a phone via Bluetooth, you can play music from the phone and directly answer calls, which is very convenient. If music cannot be played after connecting the phone via Bluetooth, it means the audio source of the car's multimedia system is not set to Bluetooth. 2. Function: Many cars come with an in-car connectivity system that allows the owner's phone to connect with the car's system, enabling more functionalities. Many cars are factory-equipped with Carlife or CarPlay systems. Carlife is specifically designed to connect with Android phones, while CarPlay is designed for connecting with Apple phones.
13
1
Share

What are the models with rotary engines?

Models with rotary engines include the Mazda RX7 and Mazda RX8. Below is an introduction to rotary engines: 1. Working Principle: The expansion pressure of a rotary engine acts on the sides of the rotor, pushing one of the three faces of the triangular rotor toward the center of the eccentric shaft. This movement occurs under the influence of two component forces: one is the centripetal force pointing toward the center of the output shaft, and the other is the tangential force causing the rotation of the output shaft. 2. Advantages: This engine boasts the advantages of being lightweight, compact in structure, and high in power performance. The rotary engine can simultaneously address issues of fuel consumption and exhaust emissions. In the development of rotary engines, Mazda has reached a technological peak in terms of maximum power.
12
1
Share

Is the charging noise of new energy vehicles very loud?

New energy vehicles do produce some noise during charging. Below is relevant information about new energy vehicles: 1. Advantages: Compared to traditional fuel vehicle technology, new energy vehicle technology can effectively reduce emissions, improve fuel efficiency, lower usage costs, and also has the advantages of smooth operation and low noise. However, new energy technology is still in the exploration and development stage, placing extremely high demands on current battery technology, precision mechanical and electronic control technology, and various supporting facilities. 2. Application Scope: New energy vehicle technology mainly reflects the upgraded national emission standards, including fuel cell vehicles, hybrid vehicles, hydrogen-powered vehicles, and solar-powered vehicles. These are primarily used to replace petroleum resources and control emission pollution.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.