Will vehicles without annual inspection be captured by electronic surveillance on the road?

1 Answers
LaElliott
07/29/25 6:35pm
Vehicles without annual inspection will be captured by electronic surveillance on the road. If a motor vehicle driver commits any of the following acts, the traffic management department of the public security organ shall impose a fine: during the period when the motor vehicle driving license is seized, detained, or temporarily suspended according to law, the driver uses concealment or deception to reapply for a motor vehicle driving license; or when the physical condition of the motor vehicle driver changes and becomes unsuitable for driving a motor vehicle, the driver still continues to drive. More relevant information is as follows: Note 1: The vehicle owner or unit must fill out the "Motor Vehicle Annual Inspection Form" and send it to the designated location for annual inspection on the date specified by the local vehicle management office. After the vehicle passes the inspection, the vehicle management authority will affix a seal on the driving license and the "Motor Vehicle Annual Inspection Form"; Note 2: For vehicles that cannot undergo inspection on schedule due to long-term assignments outside the local area, the owner must submit an application, and the inspection will be conducted by the local vehicle management office entrusted by the original vehicle management office. After inspection, the results will be notified to the original vehicle management office; Note 3: For vehicles that cannot undergo annual inspection on schedule due to special circumstances, an application for extension must be submitted in advance to the local vehicle management office.
Was this review help?
20
3
Share
More Forum Discussions

Will the bumper break if it is directly pressed back after falling off?

If the bumper falls off and is directly pressed back, it may break. Here is an introduction to the relevant content about bumpers: 1. Safety device: The car bumper is a safety device that absorbs and mitigates external impacts, protecting the front and rear parts of the car body. Many years ago, the front and rear bumpers of cars were made of steel plates pressed into channel steel, riveted or welded to the frame longitudinal beams, with a large gap between them and the car body, which looked very unattractive. 2. Plastic bumper: With the development of the automobile industry and the extensive application of engineering plastics in the automobile industry, the car bumper, as an important safety device, has also embarked on a path of innovation. Today, the front and rear bumpers of cars not only maintain their original protective functions but also pursue harmony and unity with the car body design and the lightweight of the bumper itself. The front and rear bumpers of cars are made of plastic, which people call plastic bumpers.
1
4
Share

What should be the voltage reference table for a 12V battery?

The voltage of a 12V battery is not fixed and is generally slightly higher. Batteries used in different fields may have different voltages. For electric vehicles, a fully charged 12V battery typically has a voltage of around 13.3V, while for cars, a fully charged 12V battery usually has a voltage between 12.8V and 13.0V. Below is some information about car batteries: 1. Precautions: Both excessively high or low battery voltage can have certain impacts. It is advisable to regularly check the battery's condition. When the battery voltage drops below 10.8V, it needs to be charged promptly. If the battery voltage is too low, the car may be difficult to start or even fail to start; if the battery voltage is too high, it may damage the battery. 2. Determining if the battery is fully charged: By charging time: Typically, a household car battery has a capacity of around 60Ah, and the required charging current is one-tenth of the battery capacity, which is 6A. Charging at this current usually takes about 3-5 hours to fully charge. If a lower current is used for charging, it may take about 10 hours to fully charge.
19
1
Share

How to Claim Compensation When Your New Car is Scratched and the Other Party is Fully at Fault?

After your new car is scratched, you can claim compensation from the other party by verifying their documents. Below are the specific steps to claim compensation when the other party is fully at fault: 1. Negotiation: If the accident occurs on the road, immediately turn on your hazard lights and set up warning signs behind your vehicle to prevent secondary accidents. If there is heavy traffic and vehicles are moving at high speeds, move to a safe area before negotiating. 2. Collect Evidence: Take photos of the accident scene. Modern smartphones have powerful cameras, so take as many photos as possible. Capture both wide-angle and close-up shots of the collision location. Wide-angle shots should ideally show which party was at fault for the accident. For close-ups, take multiple angles around the scene, focusing on the collision point to demonstrate the impact and the extent of damage to both vehicles. 3. Verify Documents: Check the other party's documents, including their vehicle registration, driver's license, and the validity of their compulsory insurance. Also, check if they are driving under the influence of alcohol. If the other party is driving without a license or under the influence, protect the scene and call the police immediately. If all documents are in order and both parties agree on liability, the at-fault party should call their insurance company to file a claim.
7
3
Share

Is the new Sagitar compliant with China 6 emission standards?

The new Sagitar complies with China 6 emission standards. Here is the relevant introduction to the new Sagitar: 1. Exterior: The new-generation Sagitar adopts the latest family design language, which is relatively novel compared to the old model. The large hexagonal chrome grille runs through the entire front face and is closely connected with the polygonal headlight clusters on both sides. The new-generation Sagitar is the world's first model to feature exterior ambient lighting, which is equipped on the front grille, fender side badges, and door handles. 2. Interior: The new-generation Sagitar offers dual-tone interior options. The center console is tilted towards the driver's side, making it very avant-garde and practical. At the same time, the interior materials have been significantly improved compared to the old model. For example, it uses piano black lacquer panels, large-area soft-touch panels, and leather-wrapped door panels, enhancing the sense of premium quality in the details. Whether it's materials, craftsmanship, or functionality, it is all done satisfactorily. The leather-wrapped three-spoke multifunction steering wheel has a strong grip, and the control area integrates buttons for the entertainment system and cruise control settings. The 10.2-inch full LCD instrument cluster has high playability and rich information display, with excellent display effects.
10
0
Share

When will China VI be implemented in Beijing?

Previously released draft opinion that "Beijing will implement China VI emission standard Phase A on January 1, 2019" has been rejected. The official implementation of "China VI" for light fuel vehicles will be postponed to January 1, 2020. More extended information is as follows: 1. Tianjin: The Tianjin Environmental Protection Bureau, Public Security Bureau and other ministries jointly issued a "Draft Opinion" on the "China VI" policy, which pointed out that the "China VI" emission standard is planned to be implemented from July 1, 2019, but the notice is still in the opinion collection stage, which means that Tianjin will not implement "China VI" earlier than July 1, 2019. 2. Guangzhou: The "China VI" emission standard for light vehicles, originally planned to be implemented from January 1, 2019, was postponed to March 1, leaving more transition time for citizens. 3. Shenzhen: On November 1, 2018, Shenzhen took the lead in implementing the "China VI" policy for diesel vehicles, but it was forced to stop after only one month. Recently, the Shenzhen Information Committee submitted to the Shenzhen Municipal Government the "Request for Instructions on Granting a Transition Period for the Early Implementation of China VI Emission Standards for Motor Vehicles in Our City", which pointed out that the implementation of the "China VI" standard for Shenzhen motor vehicles (new vehicles) will be postponed to July 1, 2019.
3
2
Share

What does a triangle with an exclamation mark mean on a car?

A triangle with an exclamation mark indicates a malfunction in the car's general performance or components and functions. Common issues include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: It is necessary to visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault warning in cars. Besides the triangle with an exclamation mark, there are four other forms of exclamation mark warnings: a yellow gear with an exclamation mark, a red circle with parentheses and an exclamation mark in the middle, a yellow bracket with a horizontal line and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four situations: Automatic transmission fault: A yellow gear with an exclamation mark is the automatic transmission fault warning light, indicating a fault in the transmission or transmission lubricant level below the normal range. Transmission oil should be replaced promptly. Brake system fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, mainly indicating a brake system malfunction or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Tire pressure anomaly: A bracket with a horizontal line and an exclamation mark in the middle represents the tire pressure monitoring warning light, which lights up when the car's tire pressure is too low. Check the car's tire pressure and restore it to the normal range. Lighting fault: A yellow bulb with an exclamation mark is the lighting fault indicator, indicating a malfunction in the car's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-inspection, focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting, to identify the problem.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.