Will Using Thinner to Clean a Car Affect the Paint?

How to Clean the Exterior of a Car Radiator?

Car radiator exterior cleaning methods are as follows: 1. Remove the radiator for cleaning, separate the radiator and condenser, use a brush to clean the dirt in the gaps, then rinse the surface with clean water. Be careful not to damage the aluminum fins and water pipes, as the aluminum fins are easily deformed and can break with a little force. Excessive damage to the aluminum fins can lead to poor heat dissipation. 2. Professional high-pressure cleaning vehicle radiator descaler: Pour the specialized scale remover into the high-pressure cleaning vehicle's water circulation system, let it soak, idle cycle, or drive for 20-30 minutes, then drain the descaler from the radiator and system, and rinse repeatedly with clean water until clean.

17

0

Share

What are the side effects of car headlight polishing?

Polishing can refurbish car headlights. After grinding away the ineffective protective layer on the headlight surface, waxing is usually required. However, the wax components on the lamp surface are prone to wear off. Once the wax is gone, the headlight surface will quickly oxidize without protection, leading to a decrease in light transmittance. As a result, polishing is needed again. Excessive polishing will make the headlight cover thinner and more prone to cracking and damage. More information about car headlight polishing is as follows: 1. The principle of car headlight polishing is similar to paint polishing, waxing, and sealing. It involves grinding first and then protection, which may inevitably damage the headlight itself over time. 2. If there are minor scratches that do not affect the lighting effect, polishing is unnecessary. If there are many scratches, severe damage, or the surface becomes dull and yellow, polishing is not recommended, and replacement is advised.

5

3

Share

What to Do If a Vehicle Fails Annual Inspection?

If a vehicle fails its annual inspection, it is usually due to certain non-compliant aspects. It is recommended to promptly address these issues through repairs to bring the vehicle up to standard before reapplying for the inspection. Common reasons for failing the annual inspection include: 1. Missing required documents: The driver must present the vehicle registration certificate, insurance policy, and ID card—none can be omitted. 2. Use of detachable license plate frames; installation of high-intensity xenon lights; or unresolved traffic violations. 3. Unauthorized modifications: Any changes to the vehicle's color or engine must match the information registered on the vehicle registration certificate.

17

4

Share

What are the three photo standards for determining a red light violation?

Three photos captured by electronic cameras are used to determine a red light violation: a photo of the vehicle crossing the intersection stop line, including the traffic light showing red and the license plate number; a photo of the vehicle completely passing the stop line, including the traffic light showing red and the license plate number; and a photo showing the vehicle continuing to move, by comparing whether the vehicle's position has changed, including the traffic light showing red and the license plate number. Capturing these three photos confirms a red light violation. The act of running a red light is clearly defined in the "Road Traffic Safety Law." Article 26 states that traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light permits passage, and a yellow light serves as a warning. A red light is a traffic signal prohibiting passage, and driving through an intersection when the light is red constitutes a red light violation. Six types of red light violations: Stopping immediately after crossing the line at a red light (when the light turns red, the vehicle fails to brake in time, and the front of the car crosses the stop line): If the vehicle has just crossed the stop line when the light is red but stops immediately, this will not be penalized as a red light violation. However, if there is noticeable movement after crossing the line, it will be penalized. The three photos captured by electronic cameras for a red light violation are: the front wheels crossing the stop line, the rear wheels crossing the stop line, and the front wheels crossing the opposite stop line. Only when all three photos are present will it be considered a red light violation, resulting in a 6-point deduction and a 200-yuan fine under Article 90 of the new "Road Traffic Safety Law." Running a red light under police direction (the signal is red, but the traffic officer signals to proceed): When there is a conflict between the traffic signal and the officer's gesture, the driver must obey the officer's on-site command. If a red light violation occurs due to the officer's direction, the driver can request a diversion certificate from the local traffic police department to avoid penalties. If the driver disagrees with the penalty, they can appeal through administrative reconsideration or litigation. Stopping after the entire vehicle crosses the line at a red light (failing to brake in time, causing the entire vehicle to cross the stop line): If the vehicle stops after completely crossing the stop line without further movement, this is not considered a red light violation but rather a stop-line crossing violation. Reversing after crossing the line (attempting to avoid penalties by reversing after crossing the stop line at a red light): Motor vehicles are prohibited from reversing at railway crossings, intersections, one-way roads, bridges, sharp curves, steep slopes, or tunnels. Violators may receive a warning or a fine. Accidentally running a red light behind a large vehicle (due to obstructed view by a large vehicle ahead, following it through the intersection): Drivers must maintain sufficient visibility to see traffic signals and ensure a safe braking distance. Generally, if a vehicle is photographed following a large vehicle through an intersection, it is considered a red light violation and will be penalized accordingly. Passing through an intersection during a yellow light (when the signal turns yellow): Traffic authorities state that Article 91 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" stipulates that vehicles that have already crossed the stop line when the yellow light is flashing may continue to pass. However, if the driver speeds through after the yellow light has already turned on, this will be considered a red light violation if captured.

9

0

Share

How Long Does It Take to Receive a Text Notification After Running a Red Light?

After running a red light, the text notification for the violation captured by surveillance cameras is usually received within 3 to 7 days, with the latest being around 13 days. However, some cities now offer "instant electronic police capture alerts," where you can receive a text notification within 5-10 minutes of being captured. However, this notification does not confirm the violation; it merely serves as an alert. The final determination of whether a violation occurred still takes 3-7 days. If a violation is confirmed, you will receive another text notification. For traffic violations captured by surveillance cameras, vehicle owners generally do not receive an immediate text notification. There is a delay, and the duration may vary. After the electronic camera captures the violation, the relevant violation information needs to be transmitted through a dedicated channel to the traffic police management center. It is then compiled and reviewed by relevant traffic police personnel. Once confirmed as a violation, the system automatically retrieves the vehicle owner's phone number based on the license plate information and sends the violation details via text message. After receiving the violation text, the vehicle owner must address the issue with the traffic police department at the location of the violation within one month before the vehicle's annual inspection. If you suspect a violation, you can use 15 days as a benchmark. If no text notification is received within 15 days, it is likely that no violation was recorded. Methods for Traffic Violation Queries: Traffic violation queries refer to checking motor vehicle violations of traffic regulations through online platforms or query terminals. There are five methods for vehicle violation queries: traffic branch terminal queries, vehicle violation website queries, phone queries, text message queries, and mobile app queries. Website Query: You can search for "vehicle violation query" and enter your vehicle information to check. Phone Query: To inquire about violations, you can call the local 114 (area code + 114) or 12580 for confirmation. Violations can only be processed at the location of the violation or the vehicle's license plate issuance office. For on-the-spot violations, such as those directly caught by traffic police, they must be handled at the violation location. Text Message Query: Open your phone's text message interface, enter "WZ + license plate number + plate color," and send it to 1062650001. Mobile App Query: Open the "Traffic Management 12123" app, select "violation query," and clear any unresolved violations.

5

Share

What is Tested in Subject One?

The "Regulations on the Application and Use of Motor Vehicle Driving Licenses" clearly stipulates the content of the Subject One driving test: road traffic safety laws, regulations, and rules; traffic signals and their meanings; knowledge of safe driving and civilized driving; safe driving knowledge under conditions such as highways, mountainous roads, bridges, tunnels, nighttime, adverse weather, and complex road conditions; emergency handling knowledge in situations like tire blowouts, steering failure, and brake failure; general structure of motor vehicles, common knowledge of main safety devices, basic knowledge of daily inspection and maintenance; basic knowledge of self-rescue and first aid after traffic accidents, as well as common hazardous materials. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the Subject One test consists of 100 questions, divided into single-choice questions and true/false questions, with each question worth 1 point, totaling 100 points. If 11 questions are answered incorrectly during the test, the system will automatically submit the test and end the examination. Subject One, also known as the theoretical test or driver theory test, is part of the motor vehicle driving license assessment. The test content includes driving theory fundamentals, road safety laws and regulations, local regulations, and related knowledge. The test is conducted on a computer, with a time limit of 45 minutes. Subject One test precautions: During the test, students should pay attention to their attire—no slippers are allowed, and electronic devices and bags are prohibited in the examination room. Bring your ID card and queue to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal items in a locker before entering the examination room. Upon entering, the identity verification station will assign a seat. After finding your seat, begin the test. Ensure the camera is aimed at you and adhere to test discipline. If you fail the first time, there is a retake opportunity on the same day. If you fail again, you must pay to reschedule. After the test, queue to collect your score report and sign it. Failure to sign will render the test invalid. There is no limit to the number of times you can schedule the Subject One test. Each subject can be taken once, and if you fail, you can retake it once. If you do not attend the retake or fail the retake, the test will be terminated, and the applicant must reschedule. In contrast, Subject Two and Subject Three only allow five attempts. Subject Two and Subject Three tests must be scheduled at least ten days apart. If you fail the Subject Three safe and civilized driving knowledge test, the previously passed road driving skills test results remain valid. There are three subjects in the driving test: Subject One, Subject Two, and Subject Three. Subject One refers to the road traffic safety laws, regulations, and related knowledge test; Subject Two refers to the field driving skills test; Subject Three is divided into two parts: road driving skills and safe and civilized driving knowledge tests. The safe and civilized driving knowledge test is conducted after Subject Three, so it is commonly referred to as Subject Four. However, the official term (as per the Ministry of Public Security Order No. 123) does not include "Subject Four."

17

3

Share

Will Using Thinner to Clean a Car Affect the Paint?

How to Clean the Exterior of a Car Radiator?

What are the side effects of car headlight polishing?

What to Do If a Vehicle Fails Annual Inspection?

What are the three photo standards for determining a red light violation?

How Long Does It Take to Receive a Text Notification After Running a Red Light?

What is Tested in Subject One?

When is the Best Time to Change Engine Oil?

What is the Difference Between Coolant Colors?

What is the method for changing automatic transmission fluid?

What Causes the Ticking Sound After Parking and Turning Off the Engine?