Will using 95 octane fuel instead of 92 damage the car?

1 Answers
SanAdriana
07/29/25 5:41pm
Using 95 octane fuel occasionally in a car designed for 92 octane will not cause damage, but long-term use can be harmful. Here are the specific reasons: 1. Switching from 92 to 95 octane means using a higher-grade fuel than recommended. In this case, the engine's compression ratio is insufficient, leading to incomplete combustion, sluggish acceleration, and delayed ignition. 2. Blindly using higher-octane fuel not only results in poor acceleration but also fails to utilize its high anti-knock properties, leading to unnecessary expenses. 3. The engine's compression ratio, ignition timing, and other parameters are preset by the manufacturer, and the most suitable fuel is the one recommended by the automaker.
Was this review help?
15
2
Share
More Forum Discussions

Can the Roewe erx5 hybrid run long distances?

Roewe erx5 hybrid can run long distances. The following are specific introductions about the Roewe erx5: 1. Power aspect: The Roewe erx5 is a compact SUV, which uses a 1.5-liter turbocharged engine. This engine has a maximum power of 162 horsepower and a maximum torque of 250 Nm. It can output the maximum power at 5500 rpm and the maximum torque between 1700 to 4000 rpm. 2. Configuration aspect: This engine is equipped with direct injection technology and uses an aluminum alloy cylinder head and block. The total power of the electric motor matched with this engine is 56kw, and the total torque is 318 Nm.
6
0
Share

What does L mean in an automatic transmission car?

Automatic transmission L refers to Low, which is the low gear. Shifting from D gear to L gear does not require stopping or braking operation, and you can push the gear lever into L gear while driving. Additional information: 1. The function of L gear: Generally, transmissions with L gear basically have several gears such as L1, L2, and L3. In this mode, the transmission will limit the gear to these low gears from 1 to 3, which can provide better traction. At this time, the vehicle has strong torque but relatively low speed. Therefore, the high torque of L gear can be used to climb some steep slopes, or the lower speed of L gear can be used to descend long slopes. These are the main functions of L gear. 2. Usage scenarios: L gear can also be used in stop-and-go traffic in urban areas, which can reduce the jerking caused by frequent gear shifts in the transmission. When going downhill or descending a long slope, placing the gear in L can restrict the car's gear to automatically stay in the lowest gear, allowing the car to use engine power for braking when going downhill. This prevents the driver from having to press the brake for a long time, which could cause the brake pads to overheat and lead to danger.
10
0
Share

Can the Car Be Locked If the Door Is Not Properly Closed?

Generally speaking, if the car door is not properly closed, the car cannot be locked. Some car models will provide a warning, while others may automatically close the door. However, leaving the windows open does not affect the locking process. Additional information: 1. Precautions for electronic locking: For example, check if the car lights turn on after locking; or if the rearview mirrors automatically fold (only for vehicles with this feature); or if the car emits a locking sound. Remember these signals well. If you notice anything unusual, check for any signal interference sources nearby. 2. Reasons for being unable to lock the car: If you find that the car cannot be locked, apart from human interference factors, it could also be due to interference signals emitted by large LED displays nearby, causing the car remote control to malfunction. Therefore, it's best to park in a different location or ask nearby stores to turn off their LED lights first.
19
4
Share

Is there a difference between external painting and 4S shop painting?

There are differences between external painting and 4S shop painting, as 4S shops have more comprehensive equipment and better paint quality. Below is a detailed introduction to the 4S shop painting process: 1. Cleaning and sanding: After scratches or collisions, sheet metal repair is usually performed first to restore the basic shape. Professional painting and sanding tools are used to remove the original paint, exposing the metal panel. 2. Filling dents: Applying putty ensures a smooth paint surface and fills in any dents. This process is typically repeated three times, as it affects the final painting result. 3. Base preparation: A paint scanner is used to analyze the car's paint, followed by manual fine-tuning. Since different vehicles have varying usage durations, the paint may have slight variations, requiring technicians to compare the paint sample with the car body color on-site. 4. Painting: The main types of paint include standard paint, metallic paint, and pearl paint.
3
1
Share

How many kilometers does the Envision need for its first maintenance?

The manufacturer's maintenance manual for the Envision specifies maintenance every 5,000 kilometers or 6 months, or as indicated by the oil life monitoring system. However, most 4S dealerships typically recommend the first maintenance at 3,000 kilometers or 3 months. Below is more information about car maintenance: 1. Introduction: Car maintenance, also known as car servicing, refers to the regular preventive work of inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle. 2. Purpose: To keep the car clean, maintain normal technical conditions, eliminate potential hazards, prevent failures, and extend the service life. 3. Types: Routine maintenance is divided into three aspects: body maintenance, interior maintenance, and body refurbishment.
12
4
Share

What is the symbol for dipped headlights?

There is no symbol for dipped headlights. Below is relevant information about the classification of headlights: 1. Semi-sealed headlights: The lens and reflector of semi-sealed headlights are glued together and cannot be disassembled. The bulb can be installed from the rear of the reflector. The advantage of semi-sealed headlights is that only the bulb needs to be replaced when the filament burns out, while the disadvantage is poor sealing. Combined headlights integrate the front turn signal, front position light, high beam, and dipped beam into a single unit. The reflector and lens are made from organic materials as a single piece, allowing the bulb to be easily installed from the rear. With combined headlights, automobile manufacturers can produce headlight lenses in any desired style to improve aerodynamic characteristics, fuel economy, and vehicle styling. 2. Sealed headlights: Sealed headlights are further divided into standard sealed headlights and halogen sealed headlights. The optical system of standard sealed headlights involves welding the reflector and lens into a single unit to form the bulb housing, with the filament soldered onto the reflector base. The reflector's surface is vacuum-coated with aluminum, and the bulb is filled with inert gas and halogen. This structure offers excellent sealing, preventing atmospheric contamination of the reflector, high reflection efficiency, and a long service life. However, if the filament burns out, the entire headlight assembly must be replaced, which is more costly.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.