Will Traffic Police Check Wheel Hub Stickers?

2 Answers
LaGenevieve
07/29/25 5:38am
Traffic police will not check wheel hub stickers as long as they do not exceed 30% of the vehicle's body area. However, if the wheel hub stickers exceed 30% and have not been approved by the public security traffic management department, it will result in inconsistency between the vehicle and the photo on the driving license, and the vehicle may be deemed as illegally modified. Although the law allows modification of vehicle body color, certain colors such as fire engine red, engineering rescue yellow, and national administrative law enforcement white-blue are reserved for specific vehicles and cannot be used by ordinary cars. Therefore, when modifying a vehicle, it is important to choose the appropriate color and obtain approval from the relevant authorities. Precautions for Wheel Hub Modification: It is important to avoid excessively wide wheel hub modifications. To maintain the aspect ratio of the tires, thinner tires may reduce passenger comfort when driving on uneven roads. Additionally, frequent monitoring of tire wear is necessary because larger wheel hubs can accelerate tire wear, increasing the risk of traffic accidents. It is also crucial to note that only wheel hubs of the same size as the original can pass the annual inspection. Non-standard wheel hub sizes will fail the inspection.
Was this review help?
17
0
Share
MariaRose
08/12/25 9:11am
I've been driving for over ten years and occasionally put small stickers on the wheel hubs to add a bit of personality. Traffic police rarely check this during routine inspections unless the stickers are particularly eye-catching or alter the vehicle's appearance. For example, reflective stickers might make the police mistake the car for an official vehicle under strong light, which would draw attention. The key is not to let the stickers cover the license plate or lighting components, otherwise it might violate traffic rules and result in a ticket. I've used reliable 3M stickers that adhere firmly and don't easily fall off, avoiding environmental pollution from flying off at high speeds. Regular maintenance should also include checking the stickers to ensure they're not damaged and affecting safety. In short, a little decoration is fine, as long as it's not too exaggerated—generally, the police won't bother, and you can drive with peace of mind.
Was this review help?
16
0
Share
Expand All
More Forum Discussions

Why Does a Manual Transmission Car Make Noise When Shifting into Reverse Gear?

Manual transmission cars may produce noise when shifting into reverse gear due to the following reasons: Reverse gear lacks a synchronizer: The synchronizer is an internal component of the transmission that ensures smooth gear engagement when shifting. Some vehicles do not have a synchronizer, making it harder to shift gears. Friction between gears during shifting: If the clutch is depressed, but the reverse gear in the transmission is still rotating within a short period, attempting to shift will likely cause gear grinding. However, if you wait a few seconds after depressing the clutch until the rotating reverse gear comes to a complete stop before shifting, the noise will not occur.
12
4
Share

Will Washing the Car by Myself Damage the Paint?

"Washing the car by yourself will not damage the paint. Using the correct method to wash the car will not cause any harm to the vehicle's paint. The related maintenance methods for car paint include waxing, glazing, coating, and crystal coating. Specific introductions are as follows: Car paint waxing: Waxing is the simplest and cheapest maintenance for car paint. If you have a limited budget but still want to take good care of your car, you can choose waxing. Car paint glazing: It lasts longer, about half a year, and the gloss is slightly better than waxing. Car paint coating: This paint maintenance has a very good effect, making the car look bright and new after application. It also reduces the damage from external forces to the car's paint in daily life and avoids the impact of protective agents on the car paint, maintaining the color and gloss of the paint for a long time. Car paint crystal coating: This is currently the most high-end car paint maintenance method, requiring certain financial capability, and it can maintain the effect for 2-3 years."
19
4
Share

What brand is topway?

topway is a brand of car navigation systems. Concept of car navigation: A car navigation system is a driving assistance device that helps users accurately locate their current position, calculates the route based on the set destination, and guides users to their destination through map display and voice prompts. Operating principle of car navigation: The operation of a car navigation system mainly relies on the Global Positioning System (GPS). A car navigation system is primarily composed of a chip, antenna, processor, memory, and screen.
7
1
Share

Can I Turn on the AC Without Starting the Engine?

Yes, but it will consume a significant amount of fuel. Battery: The AC compressor is driven by the engine, but the blower fan is powered by the battery. When the car is idling, it may not necessarily charge the battery. Excessive use of the blower fan can drain the battery over time, leading to long-term battery depletion. Therefore, it is advisable to avoid turning on the AC without starting the engine. Engine Waste Heat: When the AC is off, the air blown out utilizes the engine's waste heat. This is the principle behind the warm air from the car's heater in winter, which does not use the AC refrigerant. However, this method will consume more fuel.
1
2
Share

What are the effects of rainwater leaking into the engine compartment?

"Rainwater entering the engine compartment may cause brake failure, battery short circuit, oil deterioration, sensor damage, and other effects. Below are the corresponding solutions and daily maintenance: Solutions: Disconnect the negative terminal of the battery to prevent short circuits in various electrical components due to water ingress; inspect the engine, first checking whether water has entered the engine cylinders, as this can bend the connecting rods and damage the engine. Also, check if water has mixed with the engine oil, as this can cause the oil to deteriorate and lose its lubricating properties, leading to excessive engine wear. Additionally, check if water has entered the transmission, as this can degrade the gear oil and cause gear wear. Daily maintenance methods: When the vehicle is in a waterlogged state, do not turn off the engine immediately. Instead, let the engine idle for a while to evaporate any water traces in the engine, transmission, clutch, and exhaust pipe to prevent rust. It is best to drive for a short distance to also evaporate any moisture in the brakes. Regularly inspect the engine compartment to check for any signs of water ingress."
4
0
Share

What is the difference between t651 and t6?

T651 and T6 mainly have the following differences: Different internal stress: Generally, T6 has relatively large internal stress and is prone to deformation during processing. The most suitable state for processing should be T651, which is stretched on the basis of T6 to eliminate internal stress. Different states: T6 state: After solution heat treatment and cooling, it has reached high strength and no further cold working is performed. T651 state: After solution heat treatment and cooling, it has reached high strength, and then undergoes cold stretching by a stretching machine to eliminate residual internal stress after heat treatment, ensuring no deformation during subsequent deep processing to guarantee the precision of machined products.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.