When driving, if a car's tire runs over a large, sharp stone or gets small sharp stones stuck in it, it can easily puncture the outer rubber layer of the tire and damage the inner tube, significantly increasing the risk of a blowout. Therefore, drivers should try to avoid running over large stones and promptly remove any sharp stones stuck in the tires. Tire Pressure Monitoring Light On: The tire pressure monitoring indicator is a yellow symbol featuring an irregular circle without a seal on top, with four small spikes at the bottom and an exclamation mark inside. The tire pressure monitoring light turning on indicates abnormal tire pressure. Abnormal tire pressure generally occurs for the following three reasons: Abnormal Tire Pressure: The system usually alerts when the tire pressure is below 1.8 bar or above 3.0 bar. In such cases, a tire inspection and pressure adjustment are necessary. Tire Pressure Monitoring Not Reset: After inflating the tires, if the tire pressure monitoring system is not reset in time, it will continue to display the previous data, causing the tire pressure monitoring light to stay on. Simply performing a tire pressure reset will resolve this issue. Damaged Tire Pressure Sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, it can also trigger the tire pressure warning light. In case of sensor damage, the only solution is to replace it with a new one.
