Will there be any issues if I don't attend the scheduled Subject 4 test?

1 Answers
OClaire
07/29/25 1:01pm
Not attending the scheduled Subject 4 test will result in a failure. If the applicant cannot attend the test at the scheduled time due to unforeseen circumstances, they must apply to cancel the appointment one day in advance. If the applicant fails to attend the test at the scheduled time without prior cancellation, the test will be marked as a failure. Below is some information about the Subject 4 test: 1. Test format: Depending on the type of driver's license being applied for, 50 questions are randomly selected from the corresponding Subject 4 question bank in proportion. For car licenses, questions are selected from a pool of 1235 questions, and for large vehicle licenses, questions are also selected from a pool of 1235 questions, with each question worth 2 points. 2. Test duration: The test lasts 45 minutes. If the examinee makes mistakes totaling 12 points (6 questions) during the test, the test will be terminated. 3. Question types: The test includes true/false questions (questions 1-22), single-choice questions (questions 23-45), and multiple-choice questions (questions 46-50). The test questions consist of picture-based questions, scenario recognition questions, and text-based questions.
Was this review help?
14
3
Share
More Forum Discussions

Can the new 3 Series Sport not perform launch control?

The new 3 Series Sport can perform launch control. BMW 3 Series launch control method: Long press the traction control button (the button above the Sport/ECO mode selector near the gearshift) until DSC deactivation is indicated. Then, press the brake pedal with your left foot while pressing the accelerator with your right foot. When the RPM reaches 3000, fully depress the accelerator while simultaneously releasing the brake. BMW 3 Series starting precautions: Ensure smooth starts. For normal starts, maintain proper driving posture, keep eyes on the road ahead and both sides, and avoid jerking, stalling, or surging. Confirm all electronic stability systems are disabled as they will prevent launch control like a teacher monitoring classroom behavior. When pressing both pedals, the vehicle will indicate launch control activation. Pay attention to gear selection when starting. Choose appropriate gears based on road conditions: use 1st or 2nd gear on flat, solid surfaces; always use 1st gear in extreme cold, loose soil, or uphill conditions; 1st gear is also mandatory for snowy/muddy roads, along with clearing wheel tracks or applying sand/gravel under tires.
19
0
Share

Should You Pull the Brake When Starting a Motorcycle?

Before starting a motorcycle, do not press the brake. Press the clutch, shift into gear, then release the clutch and throttle to start moving. However, when starting a scooter, you need to pull the brake because scooters do not have a clutch and rely entirely on the throttle to control movement. This design is purely for safety reasons. If you start the engine without pulling the brake, the vehicle may lurch forward unexpectedly, which is very dangerous. Therefore, pulling or stepping on the brake while starting ensures safety. If you are experienced, you can disconnect the two brake wires, allowing you to start the engine directly by pressing the ignition switch. The electric start circuit of a scooter is designed to be linked with the brake circuit. During electric start, you must engage the brake (either the front or rear brake) to complete the start circuit. Otherwise, pressing the electric start switch will have no effect, and the starter motor will not receive power. The principle is the same whether you pull the front brake or step on the rear brake during electric start—either one will work. If one of the brakes does not respond, it may be due to a faulty brake switch, improper installation, or being too loose to complete the circuit. In such cases, inspect, adjust, or replace the brake switch.
6
0
Share

Does the airbag light being on in the Haval H6 have any impact?

Generally, there is no impact. Reasons for the airbag light being on in the Haval H6: 1. Check the connectors: One of the connectors in the airbag system may be disconnected or have poor contact, which is also the most frequent cause of this issue. Check the connection status of all connectors (yellow connectors), and reconnect each one. It is best to wrap a layer of black tape around the connectors for reinforcement. If other electrical devices have been installed in the car or the steering wheel has been disassembled, pay special attention to the connection status of the connectors in those areas. 2. Loose grounding wire somewhere in the car: Check the contact status of all grounding wires. Usually, poor contact cannot be seen with the naked eye, so the best method is to tighten all grounding wire connections. Other possible reasons may include faults in components such as the collision sensor or airbag control module. This involves replacing related parts, but the probability of such faults is actually very low. If the car has been involved in a collision before, this aspect should be considered for inspection.
16
4
Share

What is the difference between AMT and CVT in cars?

The difference between AMT and CVT in cars lies in the transmission method: AMT is an Automated Manual Transmission, which adds a microcomputer-controlled automatic shifting system to a manual transmission; CVT is a Continuously Variable Transmission, using two sets of pulleys for variable speed transmission. The functions of transmission fluid are: 1. Keeping the shifting system clean; 2. Lubricating the transmission device. Signs that transmission fluid needs to be changed include: 1. Vehicle shaking and gear shifting jerking; 2. The dashboard showing a transmission high-temperature warning; 3. The car stalling; 4. Unusual noises. Methods for maintaining the transmission include: 1. Regularly checking the fluid level; 2. Not skipping gears when shifting up; 3. Not forcing the transmission into neutral; 4. Not shortening the idle warm-up time; 5. Avoiding gear grinding when shifting.
19
5
Share

What Causes the Gear Shift Jerk in the New Bora?

Under normal circumstances, this jerking sensation is an inherent flaw of dual-clutch transmissions that is difficult to overcome, at least at this stage. Perhaps improvements will be made in the future. The primary advantage of dual-clutch transmissions for manufacturers is their cost-effectiveness and low production cost, but they offer little benefit to consumers. The jerking sensation is the most common complaint from owners of dual-clutch vehicles. In congested urban driving conditions, the dual-clutch transmission tends to automatically shift between lower gears, and unsuccessful gear changes can result in this jerking sensation. Additionally, overheating in dual-clutch transmissions is a significant issue. Inadequate cooling systems and excessively high temperatures can reduce the safety of both the vehicle and its passengers, which is another major cause of the jerking. Furthermore, dual-clutch transmissions have relatively poor stability. The two sets of manual transmissions rely on programming to shift gears, which is inevitably less precise than human-controlled shifting.
20
3
Share

What kind of white is the Tianyi white?

The Tianyi white is not a metallic paint but a pearlescent white paint. Metallic paint contains aluminum powder, while pearlescent paint contains mica powder. However, some classifications inaccurately include pearlescent paint under metallic paint. Pearlescent paint is harder than metallic paint. In case of scratches, a full repaint is not necessary, as painting is typically done by panel. On September 18, 2017, the Dongfeng Citroën SUV Tianyi C5 AIRCROSS was launched in Shanghai, offering a total of 6 models. On October 2, 2018, the plug-in hybrid version, the C5 AIRCROSS HYBRID concept car, made its debut at the Paris Motor Show. In 2019, the 2020 model year Tianyi C5 AIRCROSS was released. On July 24, 2020, at the Chengdu Motor Show, Dongfeng Citroën launched two plug-in hybrid models of the Tianyi C5 AIRCROSS: the Tianyi Plug-in Hybrid 4WD SUV Enjoy Edition and the Tianyi Plug-in Hybrid 4WD SUV Premium Edition. The Tianyi C5 Aircross C-Series Trend Edition was also introduced.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.