Will there be a fine if the vehicle inspection is overdue for a few days?

2 Answers
MiaLynn
07/24/25 4:28am
There will be penalties for overdue vehicle annual inspections. If a motor vehicle fails to undergo safety technical inspection within the prescribed period, the traffic management department of the public security organ will issue a warning or deduct 3 points. The following are the penalties for overdue annual inspections: 1. If a vehicle fails to undergo safety technical inspection within the prescribed period, the traffic management department will issue a warning. Therefore, it is recommended to promptly bring the relevant documents to the inspection station for a supplementary inspection if the annual inspection is overdue for a few days. 2. According to the "Motor Vehicle Registration Regulations," the owner of the vehicle can apply for an inspection compliance mark at the vehicle management office of the registration location within 3 months before the expiration of the vehicle inspection validity period. One of the penalties is deducting 3 points for driving a vehicle on the road without timely annual inspection.
Was this review help?
17
1
Share
LaAriel
08/11/25 12:06am
Don't delay the annual vehicle inspection. Let me tell you, I just dealt with a fine last month for being one week overdue. You might get away with it on the first day, but after three or four days, the police could catch you. I was pulled over while driving in the city and fined 200 yuan, plus additional fees. It's not just about the money—delaying could affect your insurance validity. If you have an accident and they don’t cover it, you’ll be in big trouble. Rules vary by location; big cities impose fines faster, while smaller towns might give some leeway, but don’t count on it. My advice: go to the inspection station as soon as you realize your inspection is about to expire. The longer you wait, the higher the fine, and your car could even be impounded, causing more hassle. Setting a phone reminder is a good idea to avoid forgetting.
Was this review help?
5
3
Share
Expand All
More Forum Discussions

What are the body dimensions of the Focus?

The body dimensions of the Focus are 4647mm in length, 1810mm in width, and 1468mm in height, with a wheelbase of 2648mm. The Focus is a model under Changan Ford, equipped with two engines: a 1.0T and a 1.5T. The 1.0T engine has a maximum power of 94 kW, while the 1.5T engine delivers a maximum power of 135 kW. Both engines are paired with an 8-speed automatic transmission. In terms of exterior design, the Focus adopts a family-style design, featuring sharp-looking LED headlights with distinctive L-shaped daytime running lights. The front end of the hatchback version is largely similar to the sedan version but appears more compact and agile.
2
0
Share

What does the mode button in the car mean?

The mode button in the car is used to switch between multimedia modes, such as AM, FM, and HE. Generally, cars have various working modes, such as sport mode, snow mode, and off-road mode. It can also refer to the remote control buttons on the steering wheel. The mode button is used to switch between functions like CD, radio, and navigation maps. For example, if you are currently on the radio and want to switch to DVD, pressing the mode button will allow you to do so. The mode command is used to configure system devices, and you can press the mode button until the appropriate air vent direction is selected. Common air conditioning vent modes include upper, middle, and lower vents: the upper vent blows air toward the windshield, the middle vent blows air toward the body and face, and the lower vent blows air toward the leg space.
17
0
Share

Which Button is for the Car Mirror Heater?

Generally, the mirror heater button is located near the rearview mirror adjustment buttons. The icon for the mirror heater button is a small rearview mirror with several curved lines. Below is some relevant information about car mirrors: 1. Specific Function: The mirror's function is to expand the driver's field of vision, regulate pedestrians and vehicles, and maintain traffic order, among other functions. While driving, it can prevent many accidents. It is mainly used at various curves and intersections on the road, allowing drivers to see vehicles around corners and avoid accidents. 2. Main Principle: When parallel light rays hit a convex mirror, the reflected rays diverge. If you extend these reflected rays backward from the convex mirror's surface, they will converge and intersect at a single point, known as the convex mirror's principal focus.
7
2
Share

What Causes the Reversing Camera to Be Unclear?

There are many reasons why a reversing camera may be unclear. The most likely cause is dust or dirt on the camera lens, which can be cleaned with a soft cloth. If the blurriness is due to moisture, you can use a hot air blower to dry the camera for a few minutes (to remove internal condensation). The reversing camera, also known as a parking assist system, reverse visual system, or onboard monitoring system, is widely used in various large, medium, and small vehicles for reversing or driving safety assistance. The reversing camera is one of the most practical configurations for safe reversing. When the reverse gear is engaged, the system automatically activates the high-definition rear camera, displaying a clear image of the rear view on the LCD screen, allowing the driver to accurately assess the road conditions behind the vehicle.
3
0
Share

How many kilometers can semi-synthetic engine oil run?

Semi-synthetic engine oil is usually replaced every 7,500 kilometers or 7-8 months. Here is a detailed introduction about semi-synthetic engine oil for cars: Overview: Semi-synthetic oil (Semi-Synthetic-Lubricant) is one type of automotive engine oil. Semi-synthetic oil is a lubricant made using semi-synthetic base oil, which is formulated from international Group III base oils. It is a product derived from mineral oil that has been purified through hydro-cracking technology. Others: The function of engine oil (lubricant) is to lubricate and clean the engine. It can be divided into three types: mineral oil, synthetic oil, and semi-synthetic oil. Semi-synthetic oil is a mixture of mineral oil and full synthetic oil in a ratio of 4:6.
3
3
Share

What Materials Are Used for Automotive Plastic Parts?

Automotive plastic parts are polymer automotive materials. Below is a related introduction to polymer automotive materials: 1. Lightweight: One of the most prominent advantages of polymer automotive materials is their lightweight yet high-strength characteristics. Since the average density of various plastics is only 15-20% of that of ordinary steel, they are also lighter than typical wood. This feature is particularly beneficial for high-end large cars, as it can significantly reduce their own weight. 2. Excellent comprehensive physical and chemical properties: Another advantage of polymer automotive materials is their multifunctionality, making them suitable for special applications. Plastics exhibit good insulation properties, outstanding corrosion resistance, aging resistance, excellent wear and scrub resistance, good waterproofing and mechanical properties, as well as strong bonding capabilities. They can be processed into various automotive interior and exterior parts that require multiple properties and functions.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.