Will there be a fine for not wearing seat belts in the back seat of a car?

1 Answers
BellaDella
07/30/25 4:15am
There will be a fine for not wearing seat belts in the back seat of a car. According to Article 90 of the Road Traffic Safety Law: If a motor vehicle driver violates the road traffic safety laws and regulations regarding road traffic regulations, a warning or a small fine shall be imposed. If there are other provisions in this law, punishment shall be imposed in accordance with the provisions. The following is the relevant introduction: 1. The driver does not use a seat belt: When driving on urban expressways, if the driver does not use a seat belt as required, a small fine will be imposed and 2 points will be deducted. 2. Other roads: When driving on roads other than highways or urban expressways, if the driver does not use a seat belt as required, a small fine will be imposed, but no points will be deducted.
Was this review help?
6
2
Share
More Forum Discussions

What is the function of automotive radar?

Automotive radar is used for vehicles or other ground mobile vehicles. It includes various types of radar based on different technologies (such as laser, ultrasonic, and microwave), with different functions (such as obstacle detection, collision prediction, adaptive cruise control), and employing different working principles (such as pulse radar, FMCW radar, and microwave impact radar). Here are specific details about radar: 1. Inform the driver about surrounding obstacles through sound or more intuitive displays. 2. Alleviate the difficulties caused by the driver's need to check front, back, left, and right when parking, reversing, or starting the vehicle, and help eliminate blind spots and unclear vision. 3. Improve driving safety.
17
0
Share

How many kilometers can a Mercedes-Benz G63 run on a full tank of gas?

Mercedes-Benz G63 currently has 1 model for sale, including the Mercedes-Benz G-Class AMG 2022 AMG G63 model, equipped with a 585 horsepower engine, with an NEDC fuel consumption of 11.9L per 100 kilometers. The fuel tank capacity of different Mercedes-Benz G63 models is the same. The distance that can be covered on a full tank of gas is as follows: The model equipped with a 585 horsepower engine has a fuel tank capacity of 100L, and the distance that can be covered on a full tank of gas is 100/11.9*100=840km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase car fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not releasing the throttle in advance when approaching a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low, the gasoline injected during a cold start does not atomize easily, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine computer controls the engine to run at higher RPMs to warm up, which also increases fuel consumption.
16
4
Share

What to Do When the Windshield Washer Fluid in a Sedan Freezes?

Here are the solutions for frozen windshield washer fluid in a sedan: 1. Do not continuously operate the switch, as this may burn out the washer pump and cause unnecessary financial loss. At this time, you can drive the car and wait for the engine's heat to thaw the windshield washer fluid before using it. 2. If the windshield is too blurry, for safety reasons, you can warm up the car for a while or park it in the sun. Wait until the washer fluid melts, clean the windshield thoroughly, and then drive. 3. Purchase a professional de-icer and add it to the washer fluid. This method works faster—once melted, you can spray it out. 4. Add some hot water to the washer fluid. Heating the water can significantly raise the temperature of the washer fluid and help melt the ice.
17
5
Share

What brand is the engine of Dongfeng Fengshen Yixuan?

The engine of Dongfeng Fengshen Yixuan is independently developed by Dongfeng Fengshen and is a domestically produced engine. Dongfeng Fengshen Yixuan uses two types of engines, with model numbers DFMA15T and DFMC10TDS. The engine with model number DFMA15T has a maximum horsepower of 150 HP, a maximum power of 110 kW, a maximum power speed of 5500 rpm, and a peak torque of 230 N·m. The engine with model number DFMC10TDS has a maximum horsepower of 125 HP, a maximum power of 92 kW, a maximum power speed of 5500 rpm, and a peak torque of 196 N·m. For the daily maintenance of Dongfeng Fengshen Yixuan's engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB_CD grade diesel engine oil should be selected based on mechanical load, with the selection standard not lower than the requirements specified by the manufacturer. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, the performance deteriorates, which can cause various problems for the engine. To avoid faults, the oil should be changed regularly according to usage conditions, and the oil level should be kept moderate. When the oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing the oil to pass through the bypass valve and bring dirt back to the lubrication parts, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acid, moisture, sulfur, and nitrogen oxides in the combustion chamber enter the crankcase through the gap between the piston rings and the cylinder wall, mixing with metal powder produced by part wear to form sludge. A small amount of sludge remains suspended in the oil, while a large amount precipitates from the oil, blocking the filter and oil holes, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and the engine.
4
5
Share

Where is the air conditioning filter located in the Audi A6?

Audi A6 has three air conditioning filters in total, located under the glove box on the passenger side, the intake manifold, and the engine compartment water drainage channel cover. Additional information: 1. The air conditioning filter is a specialized filter designed for air purification inside the Audi A6 cabin. It uses activated carbon composite filter cloth, which combines highly efficient adsorption material activated carbon with long-fiber non-woven fabric. The compact structure effectively filters smoke odors, pollen, dust, harmful gases, and various odors. 2. The filter also efficiently filters particulate impurities, achieving oil filtration and air purification performance while effectively removing TVOC, benzene, phenol, ammonia, formaldehyde, xylene, styrene, and more.
4
4
Share

What Materials Are Used for Car Glass Polishing?

Car glass polishing generally requires polishing liquid or polishing powder. The main component of polishing materials used for glass polishing is cerium oxide. The polishing powder used for glass polishing is usually cerium oxide polishing powder, while the polishing liquid is a water-soluble polishing agent that does not contain any sulfur, phosphorus, or chlorine additives. Both materials have moderate hardness, enabling fine polishing of glass with excellent results. Below is an introduction to car glass polishing: 1. Before polishing, it is necessary to clean the surface of the glass to remove any impurities to avoid secondary damage during polishing. Then, apply the polishing liquid to the polishing machine for polishing. It is important to ensure that the polishing force is even, the applied pressure is appropriate, and the grinding is slow and precise to guarantee the desired effect. 2. If the glass has deep and large-area scratches, polishing is not recommended for repair. Deep scratches require greater polishing force, which increases the wear on the glass at the scratch site compared to other areas. This can thin the glass, causing visual distortion. Especially during nighttime driving, incoming vehicle lights can easily form halos, interfering with visibility and affecting driving safety.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.