Will there be a CFMOTO 300SR in the domestic market?

1 Answers
Chad
07/30/25 8:29am
There will be a CFMOTO 300SR in the domestic market. Design of the CFMOTO 300SR: The 300SR features a brand-new design, showcasing an aggressive sports bike style, complemented by carbon fiber textures to enhance the overall premium feel. The rear taillight adopts the latest design theme, delivering a more dynamic lighting effect. Performance of the CFMOTO 300SR: It is powered by a single-cylinder, four-stroke, liquid-cooled engine with a maximum power output of 20.5KW and a peak torque of 22Nm. The transmission system employs a 6-speed chain drive, consistent with mainstream models, ensuring further improved power smoothness.
Was this review help?
20
1
Share
More Forum Discussions

Do brake pads with 4mm remaining need to be replaced?

Brake pads with 4mm remaining do not need to be replaced. They can be used until worn down to only 0.3cm, at which point they should be replaced immediately. This is the minimum thickness limit for brake pad replacement. Composition of brake pads: Brake pads are generally composed of steel plates, bonded heat insulation layers, and friction blocks. The steel plates are coated to prevent rust, and the coating process is monitored using an SMT-4 furnace temperature tracker to ensure the temperature distribution during coating meets quality standards. Definition of brake pads: Brake pads are also known as brake linings. In a car's braking system, brake pads are the most critical safety components. The effectiveness of all braking performance is decisively influenced by the brake pads. Therefore, high-quality brake pads act as protectors for both people and vehicles.
10
5
Share

Can 17-inch to 18-inch wheel modification be approved for record?

17-inch to 18-inch wheel modification cannot be approved for record. Because modifying non-original size wheels is considered illegal modification, even if you proactively apply for record, it won't be approved. Modifiable parts: Owners can install roof racks, add side steps for jeeps, or install front/rear bumpers for small vehicles, as long as they are not too prominent, do not exceed the original length and width of the vehicle body, and do not affect the safety performance of the vehicle. These modifications are not considered illegal. Illegal modifications: Changing the car logo, adding lighting devices, installing xenon lights, etc., which alter the fundamental characteristics of the original vehicle, are all illegal. For example, changing a domestic car logo to a "Mercedes-Benz" for fun, or adding original Toyota logos that change the vehicle's identifying features, are considered illegal modifications.
17
5
Share

Can I Test Drive a Car on a Rainy Day?

You can test drive a car on a rainy day. As long as the rain isn't heavy enough to affect visibility, it's generally acceptable. Test Drive Requirements: You can go to a 4S store for a test drive. Bring your driver's license and ID card, fill out the required forms as per the 4S store's requirements, and then you can proceed with the test drive. A staff member will drive the car to the designated test drive route before handing it over to the customer for the driving experience. Test Drive Precautions: During the test drive, please follow the route specified by the dealer and ensure there is a professional accompanying driver to guarantee a smooth experience. Test driving carries certain risks, so before starting, make sure to ask whether the car is insured. Only proceed if it is covered by insurance.
7
4
Share

Are There Dash Cams That Don't Need to Be Plugged In?

Currently, there are no dash cams that don't require being plugged in. Overview of Dash Cams: A dash cam is a device that records images, sounds, and other related information while a vehicle is in motion. After installing a dash cam, it can record the entire driving process's video and audio, providing evidence in case of traffic accidents. It continuously records while driving, capturing time, speed, and location in the footage, essentially acting as a 'black box.' Functions of Dash Cams: They protect the legal rights of drivers. In case of accidental collisions with pedestrians crossing the road or cyclists and motorcyclists, drivers might face extortion. Having a dash cam allows drivers to provide valid evidence for themselves.
1
1
Share

What Do Paddle Shifters in Cars Mean?

Paddle shifters in cars are generally the gear-shifting devices for some automatic transmission vehicles. The function of paddle shifters is to enable gear changes directly by pulling the paddles without going through the gear selector lever on the transmission. This device is widely used in sports cars and coupes that emphasize performance. Additional information: The following are related introductions about paddle shifters: 1. Gear-shifting device: They can significantly enhance driving operability. Paddle shifters are usually located behind the steering wheel. When operating them, the driver typically only needs to push the gear into D, S, or manual mode. Using the paddle shifters, the driver can complete upshifts and downshifts without taking their hands off the steering wheel. 2. Different functions: The two paddle shifters have the same function; one is not for upshifting and the other for downshifting. Instead, lifting them toward the driver with the index and middle fingers is for upshifting, while pressing them toward the steering wheel with the thumb is for downshifting.
1
5
Share

What Causes the Clicking Sound in the Transmission When the Clutch Is Not Engaged?

The reasons for the clicking sound in the transmission when the clutch is not engaged: Wear and damage of bearings: When bearings wear out, the gap increases, and the fitting precision decreases. When bearings are damaged, abnormal sounds occur as they cannot operate normally, potentially leading to damage of transmission components and exacerbating the issue. This can also result from the wear of transmission components or the use of replacement parts with excessively low precision, such as worn gears or new gears with excessive clearance compared to the original ones. Insufficient or overly viscous lubrication oil causing poor lubrication: In such cases, the corresponding lubricating oil (grease) should be replaced; otherwise, it will accelerate the wear of the transmission and shorten its service life. Loose bolts on the transmission housing (end cover): Vibrations during operation can loosen the bolts, so regular inspections are recommended.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.