Will There Always Be Knife Marks After Applying Paint Protection Film?

1 Answers
MacIsabel
07/29/25 11:53pm
If there are knife marks after applying paint protection film, it is recommended to go to a 4S shop or a professional repair shop for restoration. Below is an introduction to paint protection film: 1. Concept of Paint Protection Film: Paint protection film refers to applying a high-performance, new environmentally friendly film (plastic film) on the car body. The materials of paint protection film include: PU, PVC, TPU, etc. The new generation of paint protection film is basically made of TPU + nano coating. 2. Function of Paint Protection Film: By applying a layer of protective film with special properties on the paint surface, it can protect the paint surface. The effect covers the above four generations of paint surface beauty products, and some new features are added, such as: scratch repair (some minor scratches can be automatically repaired), anti-scratch, etc. 3. Consumer Groups of Paint Protection Film: The effect of paint protection film completely depends on the quality of the film. If you encounter inferior film, it will not only fail to protect the paint surface but may also damage the paint. It is recommended to choose branded film with a price of over 10,000 yuan, considering your driving habits, vehicle scratch repair costs, and other comprehensive factors.
Was this review help?
7
2
Share
More Forum Discussions

Does the XPeng G3 come with a charging station?

XPeng G3 offers a charging station as part of its new car promotion. Definition of charging station: A charging station functions similarly to a fuel dispenser at a gas station. It can be fixed to the ground or walls and installed in public buildings (such as office buildings, shopping malls, public parking lots) and residential community parking lots or charging stations. It can charge various types of electric vehicles at different voltage levels. Technical implementation of charging stations: As an energy supply device for electric vehicles, the charging performance of an electric vehicle charging station is related to the battery pack's service life and charging time. This is also one of the most concerning aspects for consumers before purchasing an electric vehicle. The basic principle of designing an electric vehicle charger is to achieve fast, efficient, safe, and reasonable power replenishment for the power battery. Additionally, the charger's applicability to various types of power batteries must be considered.
5
5
Share

Can the Teana's doors be locked without turning off the engine?

Teana's doors can be locked without turning off the engine. You can use the mechanical key to lock the doors. Try to use the mechanical key to lock the doors: Using the mechanical key to lock the car is more reliable, as it makes any signal jammers ineffective. If you don't mind the inconvenience, using the mechanical key more often can also save power and is even safer than using a smart key. When using the mechanical lock, make sure all doors are properly closed, and you should hear the sound of all doors locking; otherwise, the locking process hasn't been successful. Observe the vehicle's lights after locking: If you use the electronic lock, you should pay more attention to whether the vehicle is properly locked. For example, check if the lights turn on after locking or if the vehicle makes a locking sound. Remember these signals, and if you notice anything unusual compared to normal, check the surroundings for any signal interference sources.
17
5
Share

What is the fuel consumption of a 2011 Tiguan 2.0T AWD?

Tiguan 2.0T AWD actual fuel consumption is around 13L. How to calculate car fuel consumption: Fill up the car's fuel tank completely and reset the trip meter to zero. After driving for a period of time, refill the tank and note how many liters of fuel were added. Then, divide the amount of fuel added by the distance traveled to get the fuel consumption per kilometer. Reasons for high fuel consumption: Driver's skill level, improper gear shifting and excessive braking during driving, which artificially increase engine power loss. Frequent braking also leads to more starts, and fuel consumption rate is very high during starts. Driving at low temperatures, as cars require the engine to operate at normal temperatures. If the car is driven without preheating after starting, the engine remains at low temperature, resulting in poor fuel atomization and incomplete combustion.
5
3
Share

What is the installation method for the timing belt of the Lova 1.4 engine?

Do not move the crankshaft at the timing mark, install the small belt, tighten the belt slightly. The left balance shaft should be at the timing mark. Use a screwdriver to push the eccentric wheel upward and tighten the eccentric wheel screw. Align the timing marks, starting from the crankshaft, press the belt tightly towards the right crankshaft and the right balance shaft timing marks. Install the belt on the right camshaft and press the left camshaft to the timing mark. After installing the belt, release the hydraulic tensioner pull ring, and the belt will automatically adjust to the correct tension. Check if all timing marks are aligned. The small belt on the left should be synchronized with the crankshaft, just align the timing marks.
4
1
Share

What is the chassis code for the BMW 530?

The chassis code for the BMW 530 is G30, while the extended wheelbase model has a chassis code of G38. Components of the chassis: The automotive chassis consists of four main parts: the transmission system, the running gear system, the steering system, and the braking system. The chassis serves to support and mount the car's engine and its various components and assemblies, forming the overall shape of the vehicle. It also receives power from the engine, enabling the car to move and ensuring normal operation. Maintenance guidelines for the automotive chassis: To maintain the chassis during winter, it is essential to perform a thorough cleaning and rust-proof treatment. First, the chassis must be cleaned thoroughly. If there is excessive mud or dirt on the chassis, a degreasing cleaner should be used to reveal its original condition. Only then can the rust-proof treatment begin.
11
5
Share

Is 40 or 30 engine oil better for Haval F7?

Haval F7 is better with 40 engine oil, as 40 oil is more viscous than 30 oil. Introduction to engine oil: Engine oil consists of base oil and additives. The base oil is the main component of lubricating oil, determining its basic properties. Additives can compensate for and improve the deficiencies in the performance of the base oil, giving it certain new properties, making them an important part of lubricating oil. Selection of engine oil viscosity: It should meet both low-temperature startability and high-temperature lubricity. Choose the viscosity grade according to the region, season, and temperature, and try to use multi-grade oil. In winter in extremely cold areas, engine oil with OW, 5W, or OW/20 or 5W/20 multi-grade oil should be selected. In summer in hot areas, 40 engine oil or 20W/40 engine oil should be used.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.