Will the Transmission of a Flooded Car Get Water In?

1 Answers
SaraMarie
07/29/25 5:47pm
Yes, the transmission of a flooded car can get water inside. Here are the specific scenarios: First scenario: Engine coolant enters the automatic transmission through the radiator. Second scenario: Water enters the automatic transmission through the vent after the vehicle is submerged. Hazards: When water enters the automatic transmission, vehicle faults do not appear immediately, so owners often overlook checking the transmission fluid. Over time, the transmission fluid deteriorates and emulsifies, leading to reduced lubrication performance and increased wear of internal components. When the transmission slips, the fluid turns black and emits a burnt smell, and the friction elements of the clutch and brakes slip. This phenomenon can cause the engine to rev high while the vehicle speed increases slowly, often affecting gear shifting as well. At this point, the transmission must undergo major repairs.
Was this review help?
15
4
Share
More Forum Discussions

How Does a Variable Intake Manifold Work?

Variable intake manifold working principle: By altering the length or cross-sectional area of the intake pipe, it enhances combustion efficiency, making the engine smoother with more sufficient torque at low speeds, and more fluent with greater power at high speeds. More details about variable intake manifolds are as follows: 1. One end of the intake manifold connects to the intake valve, and the other end connects to the intake resonator chamber behind the intake manifold. Each cylinder has its own intake manifold. 2. When the engine is running, the intake valves continuously open and close. When a valve opens, the air-fuel mixture in the intake manifold passes through the valve into the cylinder at a certain speed. When the valve closes, the mixture is obstructed and rebounds, creating a vibration frequency over repeated cycles.
10
1
Share

What Are the Main Components of an Automobile Chassis?

An automobile chassis consists of four major systems: the power train system, the running gear system, the steering system, and the braking system. Its function is to receive power from the engine, enable vehicle movement, and ensure the car operates normally according to the driver's control. The running gear system is composed of the frame, axles, suspension, and wheels. The steering system includes the steering control mechanism, steering gear, and steering linkage. Functions of each chassis component: 1. The power train system transmits engine power to the driving wheels; 2. The running gear system supports and installs various automotive components, transferring and bearing loads both on and under the vehicle to ensure normal operation; 3. The steering system ensures the vehicle moves in the direction selected by the driver; 4. The braking system enables vehicle deceleration, stopping, and ensures reliable parking.
9
0
Share

How to Deal with Nervousness During the Driving Test?

Here are some methods to alleviate nervousness during the driving test: 1. Identify and fill gaps, summarize your practice sessions. Driving is a process that requires gradual proficiency, and only through repeated practice can you pass the driving test smoothly. During practice, it's essential to think carefully about which points are prone to mistakes and which require attention to detail. 2. Treat the test as practice and don't focus too much on the outcome. Even if most people don't pass the driving test on their first attempt, they can still obtain their license through subsequent efforts and retakes. Therefore, don't take temporary success or failure too seriously; maintaining a good mindset is the most important aspect of learning to drive and taking the test. 3. Before the test, adjust yourself and try to relax. Learn to relax yourself by taking deep breaths and adjusting your mindset. You can also seek encouragement from your instructor.
5
1
Share

What to Do When the Brake Light Malfunctions?

When the vehicle displays a brake light malfunction warning, it needs to be replaced promptly. Here are the detailed instructions: 1. Generally, vehicles are equipped with at least two brake lights, one on each side. Some vehicles also have an additional high-mounted brake light on the rear windshield. 2. Their function is to illuminate when the driver presses the brake pedal, alerting drivers behind to maintain a safe distance. 3. If the brake light malfunction is not addressed promptly, it will fail to alert drivers behind to keep a safe distance, significantly increasing the risk of rear-end collisions. 4. Brake lights are wear-prone components, as frequent braking in stop-and-go traffic or minor collisions can easily damage them. 5. Additionally, the vehicle's turn signals, reverse lights, and other lighting systems are also crucial. They not only serve for illumination but also provide warning and alert functions. Therefore, when the brake light or any other lighting system malfunctions, immediate repairs are necessary.
18
4
Share

Why does engine oil leak from the exhaust pipe?

Engine oil leaks from the exhaust pipe due to the following reasons: 1. The crankcase ventilation valve is damaged, losing its sealing function and causing oil leakage. 2. Excessive exhaust gas. The piston rings lose their sealing function, allowing high-pressure gas from the cylinders to leak into the crankcase ventilation system, increasing pressure and forcing oil out through the exhaust pipe. 3. Overfilling of engine oil, which restricts air circulation in the crankcase ventilation system, forcing oil to be expelled through the exhaust pipe. Additional information about engine oil: 1. Engine oil serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption in the engine. 2. Engine oil consists of base oil and additives.
11
3
Share

What is the correct way to buckle a seat belt?

Seat belts are designed for single-person use only, and sharing between two people is strictly prohibited. Whether you're the driver or a passenger, whether sitting in the front or back seat, the first thing to do after getting in the car is to fasten your seat belt. Here are some important points about seat belt usage: 1. Regularly inspect the technical condition of the seat belt, and replace it immediately if damaged. 2. Correctly wear the three-point lap belt. The lap belt should be positioned as low as possible, across the hips, not the waist; the shoulder belt should not be placed under the arm but should cross the chest diagonally. Seat belts are for single-person use only, and sharing between two people is strictly prohibited. Do not twist the seat belt when using it. 3. When using the seat belt, avoid letting it press against hard or fragile objects such as mobile phones, glasses, or pens in pockets. 4. Do not recline the seat back too far, as this may prevent the seat belt from retracting properly and affect its effectiveness.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.