Will the passenger in the front seat be penalized with points and fines for not wearing a seatbelt on the highway?

2 Answers
DiDallas
07/29/25 7:56pm
According to the Road Traffic Safety Law, when a motor vehicle is in motion, the passenger in the front seat should also use a seatbelt. The regulation requiring the front-seat passenger to wear a seatbelt was clearly stipulated in the old traffic regulations. Any passenger not wearing a seatbelt in the front seat can be fined by the traffic police on duty. More information from the 'Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China' is as follows: 1. Article 51: When a motor vehicle is in motion, the driver and passengers should use seatbelts as required, and motorcycle drivers and passengers should wear safety helmets as required. 2. Article 90: If a motor vehicle driver violates the road traffic safety laws and regulations regarding road traffic rules, they shall be given a warning or fined. If there are other provisions in this law, penalties shall be imposed in accordance with those provisions.
Was this review help?
8
4
Share
AidenFitz
08/14/25 3:46pm
Last time I drove on the highway, my friend in the passenger seat forgot to fasten the seat belt, and we got pulled over by traffic police for inspection. I was directly fined 200 yuan and had 2 points deducted from my license. It was heartbreaking. There are many cameras on the highway, and the police are vigilant. Not wearing a seat belt is a huge risk—it's not just about fines and points. In case of an accident, an unrestrained person could be thrown out of the car, which is extremely dangerous. Now, as soon as I get in the car, I remind everyone to buckle up immediately to avoid unnecessary fines and anxiety. Some new drivers don’t pay attention, thinking short trips are fine, but highway speeds are high, and even a small mistake can lead to an accident. The regulations are stricter now, and enforcement is more frequent. Safety always comes first, and making it a habit ensures you won’t go wrong.
Was this review help?
3
3
Share
Expand All
More Forum Discussions

What are the symptoms of a dirty car throttle body?

When a car's throttle body becomes dirty, it can cause symptoms such as unstable idling, reduced power, and difficulty starting. Unstable idling: A dirty throttle body leads to variations in the power output of individual cylinders, resulting in an imbalance in cylinder power and causing the car to idle unstably. In such cases, the throttle body should be cleaned or replaced promptly. Reduced power: A dirty throttle body directly affects the accuracy and smoothness of engine air intake. The amount of air entering the combustion chamber significantly decreases, leading to an overly rich air-fuel mixture and reduced ignition energy, which in turn results in decreased car power. The throttle body should be cleaned or replaced promptly in this situation. Difficulty starting: A dirty throttle body may cause errors in the throttle opening, allowing contaminated air to enter the engine combustion chamber, making it difficult to start the car. The throttle body should be cleaned or replaced promptly in this case.
5
0
Share

Is the BMW X1 a three-cylinder car?

The BMW X1 is equipped with both three-cylinder and four-cylinder engines. More details about the BMW X1 are as follows: 1. The BMW X1 adopts the latest design language of the BMW X family, featuring a large-sized integrated double kidney grille ready to pounce, paired with sharp and dynamic front and rear bumpers. 2. The new LED headlights offer more visual impact, perfectly complementing the 18/19-inch aluminum alloy wheels. 3. The BMW X1 is powered by 1.5T and 2.0T engines, balancing powerful performance with fuel efficiency. The 1.5T model has a maximum power output of 103 kW and a maximum torque of 220 Nm; the 2.0T model delivers a maximum power of 141 kW and a maximum torque of 280 Nm.
3
3
Share

What is the Function of Fuel Additives?

The primary function of fuel additives is to compensate for vehicle issues caused by insufficient fuel quality through their formulations and ingredients. Here are the relevant details: 1. Some chemical substances in fuel additives can clean carbon deposits and other substances accumulated in the engine system over time. Regular use in small amounts can inhibit the formation of carbon deposits, reduce engine abnormalities caused by carbon deposits, extend engine life, and to some extent improve the octane value of the fuel, reducing or eliminating engine knocking due to insufficient fuel octane. It also helps improve fuel atomization, enhance engine power and thermal efficiency, and reduce fuel consumption. 2. Full-performance fuel system cleaning additives contain highly concentrated active fuel carbon-cleaning factors and a high-concentration PEA formula, which not only provide excellent cleaning effects on valves and fuel injectors but also deliver outstanding cleaning performance on high-temperature carbon deposits in the combustion chamber.
15
5
Share

What Gear Should an Automatic Transmission Be in When Waiting at a Red Light?

If the waiting time is longer than 40 seconds, shift to N (Neutral) and engage the handbrake. For waits shorter than 40 seconds, simply keep the gear in D (Drive) while braking. Here are some guidelines for automatic transmission gear selection: 1. If the red light is particularly long, it's advisable to shift to P (Park). For shorter waits, you can shift to N (Neutral) and apply the brake, depending on the situation. 2. Automatic transmission vehicles typically use a hydraulic transmission system instead of the mechanical clutch found in manual transmission vehicles, hence there is no clutch pedal. When the engine speed is low, the torque transmitted by the fluid is limited and insufficient to move the vehicle forward. When the gear selector is placed in D (Drive) and the brake pedal is released, increasing the throttle and engine speed raises the transmitted torque, enabling the vehicle to move forward.
2
1
Share

Should the clutch be released before climbing the slope in Subject 2?

Before climbing the slope in Subject 2, the clutch should not be fully released. If the clutch is released too quickly, the car is likely to stall due to insufficient power. If the clutch is completely released, the speed may become too fast, affecting the operation. Therefore, the clutch can be released more before climbing the slope, but it should not be fully released. Here is a related introduction on how to control the slope in Subject 2: 1. When starting, first press the clutch and brake to the bottom, then slowly release the clutch until the body shakes significantly before stopping. 2. When the car reaches the semi-linked state and has enough power to climb the slope, slowly release the brake until the car starts moving before completely releasing it. 3. If the power is not sufficient when climbing the slope, you can slowly release the clutch completely until the car finishes climbing the slope.
5
1
Share

How to Choose Between the Passat Hybrid and Fuel Version?

Passat hybrid and fuel version depend on personal preference. Below is relevant information about the Passat: 1. Introduction: The Passat is a mid-size sedan designed by Volkswagen AG in Germany. It is classified as a B-segment car in the Volkswagen lineup. Since its debut in 1973, the Volkswagen Passat has swept the global automotive market with its high safety standards, classic design, and top-tier manufacturing quality for over 40 years. 2. Vehicle Design: In terms of appearance, the new generation Passat adopts Volkswagen's latest design philosophy—Fluid Rhythm. The light-rhyme front face design is complemented by flowing chrome trim, with Volkswagen's signature grille further evolved. The dot-matrix horizontal integrated grille, dual-L rotary full-LED lens headlights, and a more robust engine hood together form the brand-new front face.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.