···
Log in / Register

Will the new Lexus IS be introduced in China?

4 Answers
CamilaLynn
07/30/25 2:28am
Lexus IS2021 is almost impossible to be introduced in China, because this car is equipped with a large-displacement engine and needs to face many strict taxes. The following is the relevant introduction: 1. Power: The Lexus IS300 F-Sport uses a 2.0-liter turbocharged engine, the engine code is 8AR-FTS. The maximum power of this engine is 180kw, the maximum torque is 350 Nm, the maximum power speed is 5800 rpm, and the maximum torque speed is 1650 to 4400 rpm. 2. Body size: The Lexus IS300 is a mid-size car, the body size is: length 4680mm, width 1810mm, height 1430mm, wheelbase 2800mm, fuel tank capacity 66l. The front suspension is an independent double-wishbone suspension with a stabilizer bar, and the rear suspension is a multi-link suspension with a stabilizer bar.
Was this review help?
6
1
Share
OJosephine
08/15/25 8:38am
As a car enthusiast who spends years in car communities, I'm full of anticipation for the launch of the new Lexus IS in China. The Lexus brand has always valued the Chinese market in the luxury car segment, and the IS series was previously introduced, so the possibility of the new version being brought in is high. Its sharp design and powerful performance make it particularly suitable for those who pursue driving pleasure. However, considering China's strict National VI emission standards and chip supply issues, the launch might be delayed until mid-next year. Personally, I think if the brand evaluates the sales market positively, they will release the news promptly. Meanwhile, competing models like the BMW 3 Series are also being upgraded, and the arrival of the IS will enrich choices. I suggest fellow car enthusiasts keep an eye on official channels for updates.
Was this review help?
4
2
Share
Expand All
EmeryLee
10/21/25 6:28am
I'm planning to buy a new car and am quite concerned about whether the new IS will come to China. If it's not introduced, I'll have to consider alternatives in advance, such as the Mercedes-Benz C-Class or Audi A4. Lexus has good after-sales service in China, and the IS model has always had a good reputation, so it's highly likely to be launched, but the price or configuration might be adjusted due to import tariffs and localized production. Additionally, Chinese consumers prefer SUVs, so the brand might prioritize other models, leading to uncertainty about the IS's release timeline. I think it's best to wait for the brand's official announcement now to avoid making a hasty decision. If the introduction is delayed, older models from the used car market could serve as a transitional option.
Was this review help?
13
3
Share
Expand All
MasonLee
12/04/25 6:56am
From the perspective of automotive market trends, the new Lexus IS is highly likely to be introduced in China. Lexus has been strategically positioned in China for many years, targeting young consumers who pursue quality and cost-effectiveness, which aligns perfectly with the IS's positioning. However, it's important to note that stricter environmental regulations, such as the China VI emission standards, might delay the introduction by a few months. There's also significant sales pressure, as the IS isn't as hot-selling as the NX, so the brand will carefully assess the risks. Historically, the IS series has been steadily introduced, so I don't see it as a major issue, with movements expected by early 2025.
Was this review help?
8
4
Share
Expand All
More Forum Discussions

How Often Should Honda Transmission Fluid Be Changed?

When a Honda reaches approximately 40,000-60,000 kilometers in mileage or has been in use for about 2 years, it is necessary to change the vehicle's transmission fluid. However, the specific replacement interval should be determined based on the owner's driving frequency and habits. Below is relevant information: 1. Replacement Methods: When changing the transmission fluid, owners can choose between two methods—gravity drain and flush or machine-assisted fluid exchange. 2. Before replacing the fluid: The old transmission fluid must be completely drained, and the container should be thoroughly cleaned before adding new fluid. 3. If choosing the gravity drain method: First, loosen the drain plug at the bottom of the vehicle to allow the old fluid to drain out by gravity. After cleaning, new fluid can be added. The most direct advantage of this method is the simplicity of the entire process; however, the biggest drawback is that it cannot fully remove all the old fluid, leaving residual fluid inside the container.
9
2
Share

Why Does the Lavida Transmission Jerk?

The reasons for the Lavida transmission jerking include torque converter failure and transmission oil pump failure. Torque Converter Failure: Power transmission in the torque converter is interrupted, meaning there is no driving response when the torque converter engages any gear. This phenomenon is usually caused by two reasons: First, there is no working fluid in the torque converter. Since there is no mechanical connection between the pump wheel and the turbine in the torque converter, power is transmitted through the fluid as a medium. Without fluid, power naturally cannot be transmitted. Second, the turbine is loosened or stuck with the turbine shaft. Transmission Oil Pump Failure: Intake system leakage, excessively lean air-fuel mixture; incorrect timing, improper ignition advance angle; throttle position sensor or air flow meter failure; low fuel pressure; injector malfunction.
3
4
Share

Where is the ABS fuse located in the Mercedes-Benz B200?

The fuse box for the Mercedes-Benz B200 circuit is located under the hood, in the engine compartment, next to the battery. Fuse Overview: Automotive fuses are a type of current fuse. When the circuit current exceeds twice the rated current of the fuse, it will blow within seconds to protect the circuit. They are commonly used for overcurrent protection in automotive circuits and also for industrial equipment. Fuse Classification: Fuses can be divided into: mini blade fuses, small automotive fuses, medium automotive fuses, and large automotive fuses. The rated current ranges from 1-40 amperes (A) to large fuses of 30-120 amperes (A), with a rated voltage of 32 volts (V).
12
0
Share

What Causes the Noise When Starting a GAC Trumpchi?

GAC Trumpchi starting with noise is due to brake noise, especially for new cars or newly replaced brake pads. The brake discs and pads need to break in, and noise is quite common. Brake Principle: The working principle of brakes mainly comes from friction. By utilizing the friction between the brake pads and brake discs (or drums), as well as between the tires and the ground, the kinetic energy of the moving vehicle is converted into heat energy through friction, bringing the car to a stop. A good and efficient braking system must provide stable, sufficient, and controllable braking force, along with excellent hydraulic transmission and heat dissipation capabilities. This ensures that the force applied by the driver on the brake pedal is effectively transmitted to the master cylinder and each wheel cylinder, while avoiding hydraulic failure and brake fade caused by excessive heat. Maintenance Methods: Under normal driving conditions, inspect the brake shoes every 5,000 kilometers. Not only should the remaining thickness be checked, but also the wear state of the shoes, whether the wear on both sides is even, and whether they return freely. Any abnormal conditions must be addressed immediately.
11
5
Share

Why does the front left wheel of the Geely Geometry C make abnormal noises when passing over bumps?

The reason why the front left wheel of the Geely Geometry C makes abnormal noises when passing over bumps is due to deformation of the subframe. Effects of subframe deformation: Minor deformation of the subframe is a relatively serious issue. If the subframe is deformed, the wheel alignment data will be affected, which in turn impacts the vehicle's handling and driving stability. Function of the subframe: The subframe can be considered as the skeleton of the front and rear axles, forming part of their structure. The subframe is not a complete chassis but rather a bracket that supports the front and rear axles and suspension, connecting them to the "main frame," hence commonly referred to as the "subframe." The purpose of the subframe is to block vibrations and noise, reducing their direct transmission into the cabin. Therefore, subframes are mostly found in luxury sedans and SUVs, with some vehicles even equipping subframes for the engine. In traditional unibody designs without subframes, the suspension is directly connected to the body panels.
1
0
Share

What is the appropriate tire pressure for the Macan?

According to the international GBT2978-2008 standard, the tire pressure for different Macan tires is as follows: Standard tires: 2.4-2.5 bar; Reinforced tires: 2.8-2.9 bar; Maximum pressure: should not exceed 3.5 bar. Tire pressure, strictly speaking, refers to the air pressure inside the tire. Normal tire pressure in winter: In winter, the tire pressure should be based on the standard tire pressure of the car, with an appropriate increase of about 0.2 bar. Normal tire pressure in summer: Generally, the lower limit of the standard tire pressure is sufficient. For example, the lower limit for standard tires is 2.4 bar. If the car is often parked outdoors, the tire pressure can generally be about 0.1 bar lower than the standard to avoid tire blowouts due to high temperatures.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.