···
Log in / Register

Will the loss of the small iron block on the wheel hub have any impact?

4 Answers
AndrewMarie
07/28/25 11:42am

Yes, it will have an impact. You should redo the tire's dynamic balance. The small iron block is used for balancing. Otherwise, the car may become unstable when driving, the tire noise may increase, and the steering wheel might shake when driving at high speeds. 1. The role of the balancing weight: The small iron block on the car wheel hub is a balancing weight installed on the wheel to maintain dynamic balance during high-speed rotation. 2. Principle: Any object has uneven mass distribution in different parts. Under static or low-speed rotation, this unevenness affects the stability of the object's rotation. The higher the speed, the greater the vibration. The balancing weight helps to minimize the mass difference of the wheel to achieve a relatively balanced state.

Was this review help?
9
2
Share
DiIker
08/11/25 4:35pm

That thing falling off is actually quite troublesome. I still remember last time when the small metal block on my car's wheel fell off, the steering wheel shook like an earthquake, especially noticeable when driving on the highway. It's a balancing weight, and without it, the tire's dynamic balance is disrupted, directly affecting driving stability—it feels like riding a small boat. Not only is it uncomfortable, but over time, tire wear can worsen, with edges easily wearing unevenly, and fuel consumption might even increase a bit. I think it's better not to risk driving and quickly find a repair shop to redo the dynamic balance test and attach a new balancing weight—it's an inexpensive fix but saves a lot of hassle. Usually, when washing the car or brushing against the curb, be careful to avoid these small metal blocks falling off and causing trouble.

Was this review help?
18
5
Share
Expand All
LeRiley
09/28/25 5:42am

Losing this small iron weight indeed has an impact. During my daily driving, I've noticed it disrupts wheel balance, causing abnormal steering wheel vibrations—especially more uncomfortable when cornering or on bumpy roads. This increases tire wear rate and, in severe cases, affects the lifespan of suspension components and bearings. Out of safety concerns, I immediately parked to inspect and confirm if there are other hidden risks, and I recommend finding time to have it professionally addressed. Spending a few dozen bucks can solve the problem—don't skimp on it, as driving safety is no small matter. Making it a habit to check if these balancing weights are secure during regular tire maintenance is wise; prevention is better than cure. Developing this habit can save you from costly repairs.

Was this review help?
17
4
Share
Expand All
StEva
11/11/25 7:37am

Last time I was driving on the highway, that small metal weight fell off, and the steering wheel instantly started shaking, making me nervous. I could clearly feel the wheel imbalance. That thing is used for balancing weights. Without it, it affects the dynamic balance, the tires can wear out faster, and it even increases the risk of accidents. I suggest going to the shop to get a new one as soon as possible—don't delay.

Was this review help?
9
2
Share
Expand All
More Forum Discussions

Is Wheel Balancing Necessary After Patching a Rear Tire?

Wheel balancing is necessary after patching a rear tire, especially if the tire was removed for repair or if the patched area is relatively large. The specific reasons are as follows: Wheel balancing directly affects driving safety. If balancing is not performed after patching, the wheel may not rotate smoothly, leading to issues such as vehicle vibration and steering wheel shaking while driving. This is particularly noticeable at high speeds, where the vibration becomes more pronounced with increased speed. Symptoms of poor rear wheel balance include: 1. Vehicle vibration: Generally, poor rear wheel balance can cause vibration, though it may not be as obvious as with the front wheels. 2. Abnormal tire wear: Wheel balancing corrects uneven mass distribution. At high speeds, uneven mass distribution can become more pronounced, leading to irregular tire wear. 3. Increased fuel consumption: Poor wheel balance can increase driving resistance, thereby raising fuel consumption.
6
0
Share

Can I Take the Manual Transmission Test After Passing the Automatic Transmission Test?

You can take the manual transmission test after passing the automatic transmission test, but you will need to retake all the exams. Below is some relevant information about automatic transmissions: 1. Automatic Principle: The engine's power is transmitted through the gearbox, which is also a key factor affecting fuel consumption. Generally, automatic transmissions consume about 10% more fuel than manual transmissions. Whether manual or automatic, more gears usually mean better fuel efficiency. 2. Driving Tips: For manual transmission vehicles, it's recommended to shift gears at higher RPMs. Engines are designed to operate optimally at higher RPMs, with parameters like dynamic balance and rotational inertia set for high-speed performance. Prolonged operation at non-optimal RPMs increases internal component load and wear, leading to frequent vibrations and knocking, which can reduce engine lifespan. Shifting at 3000 RPM ensures the post-shift RPM stays around 2300, keeping the engine within a healthy operating range.
3
5
Share

Should You Engage the Gear or Press the Clutch First Before Driving?

Before driving, you should engage the gear first and then press the clutch. Here are some key points to note when operating a manual transmission car: 1. Pressing: Master the pressing of the clutch pedal through practice to develop a good habit—press it all the way down and release it slowly. 2. Releasing: Coordinate the throttle and clutch. When starting, engage first gear, slowly release the clutch, and apply the throttle in the semi-clutch state. Only release the clutch completely after the car starts moving. 3. Shifting: Master the timing of shifting. Shift gears when the engine speed is around 2000 RPM—first press the throttle and then the clutch to prevent the clutch from being forced to disengage. Then shift gears. The shifting sequence must be first gear, second gear, third gear, fourth gear, and fifth gear. Skipping gears is not recommended. Downshift according to the vehicle speed.
5
0
Share

What is the normal pressure range for car air conditioning?

Under normal operating conditions of the air conditioning system, the low pressure typically ranges between 1.0—2.5 bar, while the high pressure ranges between 15—18 bar. Additional information: 1. Normal pressure range: The standard range for car air conditioning pressure is generally that the high pressure should not exceed 1.7 MPa or fall below 1.3 MPa, while the low pressure should normally be no lower than 1.15 MPa and no higher than 1.25 MPa. If the low pressure is higher or lower than this normal range, it indicates improper adjustment of the expansion valve. 2. Evaporator wear: The car air conditioning evaporator, fan, and other components are often in a closed and dark state, creating a high-temperature and humid internal environment. Impurities, dust, bacteria, and viruses from the air enter the air conditioning system and combine with condensed water, clogging components such as the evaporator. Over time, this leads to the accumulation of dirt, nicotine, mold, fungi, and other contaminants.
4
2
Share

How often should the transmission fluid be changed for a Toyota Reiz?

Toyota Reiz requires transmission fluid replacement every 80,000 kilometers. The Reiz is a sporty B-segment sedan under Toyota, featuring rear-wheel drive. Its front suspension employs a double-wishbone independent suspension, while the rear utilizes a multi-link independent suspension. The multi-link independent suspension is an evolution of the double-wishbone design, where the two wishbones are replaced with separate links. The Reiz's headlights feature a sharper design, giving the front fascia a resemblance to the Lexus ES model. The taillights adopt an irregular contour, with the high waistline extending to the rear and integrating with the trunk, ultimately merging with the ducktail spoiler. This creates smooth side profiles while visually enhancing the vehicle's substantial presence.
3
0
Share

How to reset the one-button start maintenance reminder for Geely Vision S1?

Turn off the ignition switch, press the left-right directional button on the right side of the multifunction steering wheel, then press the one-button start to power on the vehicle. After five seconds, release the button, and the dashboard will display a reset prompt. Press and hold the SET button for more than five seconds, then press the MODE button, and finally turn off the vehicle. Below is some relevant information about the Geely Vision S1: 1. Introduction to the Geely Vision S1: The Geely Vision S1 is the second strategic model from Geely Auto in the crossover SUV market. 2. Core values: The letter "S" in the name Geely Vision S1 represents the five core values of the product: Sharp (stylish design), Smart (convenient connectivity), Safe (comprehensive protection), Satisfying (comfortable experience), and Sporty (dynamic driving pleasure).
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.