Will the Hongqi H5 display a warning when the coolant is low?

1 Answers
MacAubree
07/29/25 11:22am
The Hongqi H5 will not display a warning when the coolant is low. Generally, it needs to be replaced every 60,000 kilometers. Coolant replacement method: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with a focus on the five-way hose. The five-way hose gets its name from having five connections to various parts, and the coolant flows through it to be distributed to different sections of the car to function. If there is any coolant leakage in this part, replace the hose or resecure the connections as needed. Drain the old coolant, then flush the channels with clean water. Add clean water to the coolant reservoir, then continue adding water to ensure it flows continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water draining from the reservoir will have a faint pink tint. Keep adding clean water until the outflow is clear. Remember to remove the heater hose to drain the water from the heater core. After draining for about an hour, add the new coolant through the radiator hose to allow it to flow quickly into the radiator. Then, add another bottle of coolant to the reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. As some air is expelled from the cooling system, the coolant level will drop. Top it up again until it reaches the "MAXT" mark on the reservoir.
Was this review help?
14
2
Share
More Forum Discussions

What causes unstable idle speed without fault codes in the 2012 LaCrosse?

The reasons for unstable idle speed without fault codes in the 2012 LaCrosse are: 1. Intake manifold leakage: When unauthorized air, gasoline vapor, or combustion exhaust enters the intake manifold, it causes the air-fuel mixture to become too rich or too lean, leading to unstable idle speed. 2. Excessive carbon buildup on the throttle body: Carbon deposits on the throttle body and surrounding intake passages alter the cross-sectional area of the air passage, preventing the control unit from precisely regulating idle air intake. This also results in an overly rich or lean mixture, causing unstable idle speed. 3. Damaged intake system components: The engine's intake system has many components, such as the throttle motor, idle speed stepper motor, duty cycle solenoid valve, air flow meter, and intake pressure sensor. Faults or damage to these components can cause unstable idle speed. 4. Fuel system blockage: Issues like clogged fuel injectors, fuel filter, fuel pump screen, faulty fuel pressure regulator, or blocked return line can lead to incorrect fuel injection, causing the air-fuel mixture to become too rich or too lean and resulting in unstable idle speed.
16
2
Share

What are the requirements for purchasing and registering a car in Xi'an?

Hold a household registration in Xi'an; hold a work residence permit in Xi'an; hold a valid temporary residence permit in Xi'an, and pay local social insurance and personal income tax (usually for half a year or more). Below is the relevant information: Required documents: Original ID card, photocopy of ID card (not necessary if unavailable, as there are photocopying services at the Xi'an State Tax Bureau and Xi'an Vehicle Management Office). Original vehicle certificate; compulsory insurance policy (commercial insurance can be purchased after registration); purchase invoice; purchase qualification certificate; original registration form, etc. Registration time: Car owners in Xi'an who need to register their vehicles should bring all the required documents for the new vehicle inspection, which can be completed in one day. Processing related services at the counter can take up to two days, meaning that self-registration of a new car can be completed in three days if all documents are in order. Generally, after processing is completed, the license plate needs to be manufactured, so it cannot be obtained on the same day. It takes about 5 working days to collect the license plate. The specific time is subject to the local vehicle management office in Xi'an.
9
4
Share

What is the ground clearance of the 2021 Audi A6 allroad?

The ground clearance of the Audi A6 allroad is 139mm. Here are the relevant details: 1. Exterior: The design follows the family style with more pronounced lines, especially the hexagonal grille, lower bumper, and the lines below the doors, which exude a strong sense of power. Additionally, the design of the headlights and taillights truly lives up to the reputation of 'Light Factory.' At the rear, the new car continues the design of the new Audi A6 Avant, featuring LED taillights that are more slender and refined. It also retains the hidden exhaust design from the sedan version. The dimensions of the new car are 4950mm in length, 1900mm in width, and 1500mm in height, with a wheelbase of 2930mm. 2. Powertrain: The new-generation Audi A6 allroad quattro is equipped with three different power versions of the 3.0T V6 TDI engine, paired with 48V mild hybrid technology. The maximum power outputs are 231 horsepower, 286 horsepower, and 350 horsepower, with peak torques of 500 N·m, 620 N·m, and 700 N·m, respectively. All versions are mated to an eight-speed automatic transmission.
7
2
Share

What is the fuel tank capacity of the Maxus V80 in liters?

The fuel tank capacity of the Maxus V80 is 80 liters, as officially announced. The Maxus V80 uses No. 0 diesel fuel, with a fuel consumption of 8.86L per 100 kilometers. A full tank can cover a distance of approximately 903km. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel gauge accurately reflects the fuel level. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. The fuel tank capacity of the Maxus V80 is 80 liters, as officially announced. Owners of the Maxus V80 can also verify this information in the vehicle's configuration sheet. The Maxus V80 uses No. 0 diesel fuel, with a fuel consumption of 8.0L per 100 kilometers. A full tank can cover a distance of approximately 1000km. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel gauge accurately reflects the fuel level. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. In actual refueling situations, the amount of fuel may exceed the rated capacity. This is because the manufacturer's specified fuel tank capacity is measured from the bottom of the tank to the safe fill level, with additional space from the safe fill level to the tank opening. This extra space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the rated capacity. In actual refueling situations, the amount of fuel may exceed the rated capacity. This is because the manufacturer's specified fuel tank capacity is measured from the bottom of the tank to the safe fill level, with additional space from the safe fill level to the tank opening. This extra space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the rated capacity.
17
5
Share

Can a 10-year-old car use fuel additive?

10-year-old cars can use fuel additives. Definition of fuel additives: The main function of fuel additives is to increase the octane number of gasoline, making it burn more completely and reducing carbon deposits. This helps maintain engine power and fuel efficiency, preventing power loss and increased fuel consumption caused by excessive carbon buildup. Classification of fuel additives: Currently, mainstream fuel additives on the market are divided into two major categories based on their chemical composition: the Polyether Amine (PEA) family and the Polyisobutylene Amine (PIBA) family. Both are surfactants, representing the 5th generation and 4th generation gasoline detergent components respectively.
17
0
Share

What is the ground clearance of the Audi A3 chassis?

The ground clearance of the Audi A3 chassis is 118mm. It features a front MacPherson independent suspension and a rear multi-link independent suspension. Minimum ground clearance refers to the distance between the lowest point of the car (excluding the wheels) and the road surface when the car is fully loaded, indicating its ability to overcome obstacles such as stones. The smaller the ground clearance, the worse the ability to overcome obstacles. The Audi A3 is a sedan produced by Audi, developed on the Volkswagen MQB platform. It adopts lightweight design and aluminum materials for the body, and is powered by various engines including 1.4TFSI and 1.8TFSI.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.