Will the engine malfunction light affect vehicle inspection?

1 Answers
MacCamila
07/30/25 7:02am
It will not affect the vehicle inspection. There are many cases where the engine malfunction light is triggered by abnormal oxygen sensor readings. Reasons for the engine malfunction light to illuminate: Irregular maintenance and poor driving habits can increase the engine's operational load, leading to sensor damage, poor contact, or signal interruption, causing the vehicle's ECU to inaccurately obtain engine data. Vehicle inspection items: Speedometer indication error inspection, vehicle chassis (pit) inspection, headlight inspection, steering wheel side slip inspection, wheel weight inspection, vehicle dynamic performance inspection. Environmental inspection (exhaust emission test), as long as the malfunction is unrelated to the above items, the annual inspection can proceed. If related, the issue must be repaired first before inspection.
Was this review help?
4
3
Share
More Forum Discussions

What is the solution for the emergency call function malfunction in the Lavida?

Volkswagen SOS emergency call function malfunction solution: It is necessary to go to a maintenance organization to check the fault code storage, and eliminate it after inspection and repair. Emergency call function role: The main role of the SOS emergency call system is to provide emergency rescue services based on user feedback when the vehicle is in an emergency situation. Emergency call function usage: When the vehicle malfunctions or is involved in an accident, or when encountering danger and facing an emergency situation, find the SOS button and hold it for more than 2 seconds. The vehicle's emergency warning and rescue system will automatically send out a distress signal and actively call the emergency department.
1
0
Share

When does the ABS system activate?

ABS system activates during heavy braking or braking on slippery roads. ABS stands for Anti-lock Braking System, which is equipped with a speed sensor on each wheel. These sensors input wheel speed signals into the electronic control unit (ECU), which monitors and judges the motion state of each wheel based on these signals and generates corresponding control commands. The functions of ABS system include: 1. Maximizing brake efficiency, reducing braking time and distance; 2. Effectively preventing vehicle skidding and fishtailing during emergency braking, ensuring good driving stability; 3. Allowing steering during emergency braking, maintaining good steering control; 4. Avoiding severe friction between tires and road surface, reducing tire wear.
9
3
Share

Can the brake hold be pressed while driving?

brake hold cannot be pressed while driving. This is a parking assist function that automatically applies the brakes and can only be used when the car has come to a stop and needs to be parked. The electronic handbrake, also known as the electronic parking brake system, integrates the temporary braking function during driving with the long-term braking function after parking, and realizes the parking braking technology through electronic control. The electronic handbrake uses electronic control to achieve parking braking. Its working principle is the same as that of a mechanical handbrake, both of which control parking braking through the friction generated between the brake disc and the brake pads. The only difference is that the control method has changed from the previous mechanical handbrake lever to an electronic button.
12
5
Share

What are the differences between the Passat Lingyu and the Passat B5?

Here are the specific differences between the Passat B5 and the Passat Lingyu: In terms of models: The Passat B5 is a mid-size sedan designed by Volkswagen AG in Germany. It is classified as a B-segment car in Volkswagen's lineup. The Passat Lingyu has slightly increased dimensions in length and width compared to the B5, and the interior features added fuel tank cover and trunk remote control buttons on the left front door. In terms of vehicle configuration: The Passat B5 is based on the PQ46 platform and is equipped with a new TSI turbocharged direct-injection engine, paired with a DSG dual-clutch transmission. The Passat Lingyu is based on the older Volkswagen PL45 platform.
11
3
Share

How to reset the tire pressure monitoring system on the Refine M4?

The method to reset the tire pressure monitoring system on the Refine M4 is as follows: 1. Adjust the tire pressure of the Refine M4 to the normal state, turn on the ignition switch, and press and hold the reset button on the right side of the instrument panel. The tire pressure monitoring system will then store the current normal tire pressure data and automatically clear the original data, completing the reset. 2. Alternatively, you can use a specialized diagnostic tool to clear the fault codes and achieve the reset. In terms of electrical configurations, the Refine M4 is equipped with features such as in-car navigation, Bluetooth system, cruise control, tire pressure monitoring, rearview camera, daytime running lights, wireless charging, intelligent voice control, and the J-Connet car connectivity system.
10
2
Share

How to Fix a Scratched Rear Bumper?

The solutions for a scratched rear bumper are: 1. Use toothpaste: When the bumper is scratched, using toothpaste for repair is very effective because toothpaste itself has a grinding function, which is equivalent to applying a layer of wax to your car, thus achieving a good repair effect. However, toothpaste can only repair minor scratches; 2. Use car paint scratch repair agent: It can quickly repair the damaged part of the car paint, but this can only repair minor scratches; 3. Use a touch-up pen to cover some small and shallow scratches, making the scratches less noticeable. If the bumper is severely scratched, it is necessary to go to an auto repair shop for spray paint repair.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.