Will the Electronic Parking Brake Light Stay On All the Time?

1 Answers
MacStella
07/30/25 12:38am
Electronic parking brake light will not stay on all the time. Here are the specific details about the electronic parking brake system: 1. Compared with lever handbrake: The electronic parking brake system replaces traditional mechanical levers and tire cables, substituting the conventional lever handbrake with an electronic parking brake button. It is safer than traditional lever handbrakes as the braking effect won't change due to the driver's force, transforming the traditional lever handbrake into an easily accessible button. 2. Main applications: The electronic parking brake system is mainly used in tractors and trucks. The energy-saving system of electronic parking brake is equivalent to the engine having three gear selection buttons, allowing free selection according to different road conditions and load capacities, keeping the engine operating in the most optimized fuel economy range to achieve fuel-saving effects.
Was this review help?
11
4
Share
More Forum Discussions

What are the differences between the Sharan and the Touran?

The differences between the Sharan and the Touran are: 1. Different body dimensions: The Sharan's body length, width, and height are 4854mm, 1904mm, and 1740mm respectively; the Touran's body length, width, and height are 4527mm, 1829mm, and 1659mm respectively. 2. Different wheelbase: The Sharan's wheelbase is 2920mm; the Touran's wheelbase is 2791mm. Both the Sharan and the Touran have a five-door, seven-seat MPV body structure, with MacPherson independent front suspension and multi-link independent rear suspension, and both are equipped with a 1.4T turbocharged engine.
15
0
Share

What Are the Reasons for a Car Squeaking and Failing to Start?

Car squeaking and failing to start can be caused by: 1. Damaged bearings in the water pump, air conditioning compressor, clutch, generator, power steering pump, or belt tensioner; 2. Faulty spark plugs or ignition coils; 3. Engine starter motor spinning freely; 4. Slipping flywheel ring gear; 5. Insufficient battery charge; 6. Poor-quality gasoline. Solutions for a car squeaking and failing to start: 1. Check the battery's charge status; 2. Inspect the gear position; 3. Examine the condition of the spark plugs and ignition coils; 4. Use high-quality gasoline with guaranteed standards; 5. Check the working condition of the engine and transmission.
9
3
Share

What to Do If the Vehicle Fails OBD Inspection During Annual Inspection?

Failing the OBD inspection during vehicle testing is generally caused by faults in the vehicle's computer system. You can visit a 4S repair shop to diagnose and eliminate the faults, thereby clearing the fault codes. If the issue is due to an outdated OBD system or unsuccessful communication between the OBD diagnostic tool and the vehicle, you can go to a 4S shop to upgrade the vehicle system before retesting. Below are detailed solutions: 1. Vehicle has fault codes: Solution: If the warning light is off but fault codes are present, promptly update the software and OBD system. If fault codes persist after updating, visit a 4S shop to verify the existence of fault codes and clear them. If fault codes reappear after clearing, the vehicle may indeed have a fault, and immediate repair is recommended. If the 4S shop detects no fault codes, inquire whether the ECU system can be upgraded to the latest version. 2. OBD communication or connection failure: Solution: Check the vehicle's OBD port for dust and clean it before reconnecting. Inspect the OBD cable for proper functionality. Early low-end vehicles may lack emission monitoring capabilities in their ECU systems; visit a 4S shop for a system upgrade. 3. More than two readiness items incomplete: Solution: Drive the vehicle sufficiently to allow all sensors to reach optimal conditions before retesting. Perform a deeper inspection to check for fault codes. If previous methods fail to resolve the issue, visit a major repair shop or 4S shop for further diagnostics. 4. Connection failure: Solution: Upgrade the inspection station's OBD version to the latest and try again, or visit a 4S shop to check if the vehicle's OBD is registered in the database.
20
4
Share

What to Do When the Key Cannot Be Pulled Out in P Gear?

The solution to the problem of the key not being able to be pulled out in P gear is: check whether there is a fault in the car's gear lock circuit, then turn the key, step on the brake, and shift to P gear to pull it out. The function of P gear is: when the automatic transmission is in P gear, the transmission locks the parking gear part, and at this time, the vehicle has a certain parking effect on flat ground without stepping on the brake. The types of keys include: mechanical keys, remote control keys, touch screen keys, and smart bracelet keys. Precautions for using keys are: 1. Do not place them together with electronic devices; 2. Do not expose the key to high temperature or direct sunlight; 3. Do not use batteries with different power levels.
6
3
Share

How to Deal with Water Stains Left After Cleaning Car Windows?

The solutions for water stains left after cleaning car windows are: 1. Prepare clean water mixed with white vinegar, then wipe the windows with a cloth soaked in the solution; 2. Add salt and beer to clean water. The salt helps accelerate water evaporation, preventing water stains or other residues on the cleaned glass. Adding beer not only speeds up water evaporation but also forms a protective film after evaporation to prevent dust from sticking to the glass. The functions of car windows include: 1. Shielding from wind and rain, and reducing noise; 2. Minimizing wind resistance and improving airflow; 3. Protecting the safety of passengers. Maintenance tips for car windows are: 1. Use dedicated or suitable wiper blades and replace them timely; 2. Keep the windshield clean; 3. Use automotive-specific glass cleaner.
14
2
Share

What engine is equipped in the Haima M3?

Haima M3 is equipped with a 1.5L naturally aspirated engine. The function of the engine is to convert the thermal energy of gasoline or diesel into mechanical energy by burning and expanding the gas in a sealed cylinder, thereby pushing the piston to perform work. Taking the 2017 Haima M3 as an example, it is a compact car with body dimensions of: length 4553mm, width 1737mm, height 1495mm, and a wheelbase of 2600mm. The 2017 Haima M3 features a MacPherson strut independent suspension with a stabilizer bar at the front and an H-type torsion beam suspension at the rear. It is powered by a 1.5L naturally aspirated engine, delivering a maximum horsepower of 112PS, a maximum power of 82kW, and a maximum torque of 147Nm, paired with a 5-speed manual transmission.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.