Will the electronic eye notify if it captures unlicensed driving?

What engine does the Tiguan use?

The Tiguan is equipped with the EA888 engine and the EA211 engine, with engine displacements of 2.0T and 1.4T. The transmission system is matched with a 7-speed dual-clutch transmission. The 2.0T engine, model EA888 in the third generation, delivers a maximum output power of 220 horsepower and a peak torque of 350 Nm. When the engine starts, exhaust heat is directly transferred to the cylinder head, speeding up the warm-up process. During high-output power conditions, the cylinder head water channels assist in cooling, rapidly reducing exhaust temperature. The vehicle accelerates from 0 to 100 km/h in 7.5 seconds, with a top speed of 220 km/h and a combined fuel consumption of 8.2L per 100 km.

19

4

Share

Which Models Are Built on the Touareg Platform?

The models built on the Touareg platform include the Audi Q7, Audi Q8, Bentley Bentayga, and Lamborghini Urus. The 2019 Audi Q7 is equipped with two engine options: a 2.0T and a 3.0T, paired with an 8-speed automatic transmission. The 2.0T engine delivers a maximum output power of 185 kW, a torque of 387 Nm, a top speed of 233 km/h, a 0-100 km/h acceleration time of 7.1 seconds, and a combined fuel consumption of 8.5L per 100 km. The 2019 Audi Q8 also features a 2.0T and a 3.0T engine, matched with an 8-speed automatic transmission. The 2.0T engine produces a maximum output power of 180 kW, a torque of 370 Nm, a top speed of 231 km/h, a 0-100 km/h acceleration time of 7.4 seconds, and a combined fuel consumption of 8.9L per 100 km.

12

3

Share

What brand is the je4d25q6a engine?

je4d25q6a engine is produced by Jiangxi Isuzu Automobile Co., Ltd. located in Nanchang, belonging to a domestically manufactured engine. The 2.5T version of Changan Kaicheng F70 is equipped with the je4d25q6a engine, which has a maximum power of 110kW, a maximum torque of 360 Nm, and a maximum horsepower of 150. For daily maintenance of the je4d25q6a engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the requirements specified by the manufacturer; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, which can cause various problems for the engine. To avoid faults, the oil should be changed regularly according to usage conditions, and the oil quantity should be moderate; When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, it will either burst the filter element or open the safety valve, allowing oil to pass through the bypass valve and bring dirt back to the lubrication area, accelerating engine wear and increasing internal contamination; Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acid, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and the cylinder wall, mixing with metal powder generated by part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, blocking the filter and oil holes, making engine lubrication difficult and causing wear; Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and the engine.

8

0

Share

What is the purpose of a sports car spoiler?

The main function of a spoiler is to reduce the lift at the rear of the vehicle. If the lift at the rear is greater than that at the front, it can easily lead to excessive steering, reduced rear tire grip, and poor high-speed stability, causing the air to exert a fourth force on the car—namely, a greater adhesion to the ground. This can counteract some of the lift, effectively controlling the car's tendency to rise, reducing the drag coefficient accordingly, and allowing the car to adhere more closely to the road surface, thereby improving driving stability. For a performance-grade sports car, a spoiler is essential on the track. There are various styles of spoilers on cars. Those on race cars are higher to allow airflow to act directly on the spoiler, ensuring the downforce generated by the airflow no longer affects the car body and counteracts its effect. Therefore, the spoiler must be installed away from the car body surface. Ordinary sedans also have spoilers, but since these cars do not reach very high speeds, the spoiler rarely serves a practical purpose. Instead, enhancing the car's appearance becomes the primary reason for installing one. On station wagons, spoilers are installed at the rear of the roof to guide part of the airflow over the rear window surface. This not only reduces lift at the rear of the vehicle but also uses the airflow to clear dust from the rear window, preventing it from obstructing the rear view. Design Principle: Car spoilers are designed with reference to aircraft tails. For a long time, they were widely used in racing cars before being adapted for ordinary vehicles. Most car spoilers today are made of fiberglass or carbon fiber, which are lightweight and durable. Their shape and size are precisely calculated by designers—neither too large nor too small—as improper dimensions could increase driving resistance or fail to reduce drag and save energy. Risks of Adding Spoilers to Ordinary Cars: From a legal perspective, installing a spoiler constitutes illegal modification. If the angle of the added spoiler is incorrect, it will not enhance driving stability but may instead cause the car to "float" at high speeds, increasing risks. Privately installed spoilers are not optimized for angle and size, which can increase the drag coefficient, fuel consumption, and wind noise.

10

5

Share

How to Replace the Gear Shift Lever on a Lexus?

First, lift one corner of the dust cover on the gear lever with force to remove the dust boot, then lift the dust boot up. After lifting the dust boot, you will see a metal clamp. Remove it with pliers, and then you can pull out the gear knob. Install the new gear lever in reverse order.

7

2

Share

What does traffic violation code 4608 mean?

Violation code 4608 indicates: A motor vehicle occupying the emergency lane while driving on a highway during traffic congestion. According to the relevant provisions of the "Road Traffic Safety Law of the People's Republic of China", the penalty is: Demerit points (deduction): 6 points; Fine amount: 200 yuan; Other penalties: None. Traffic violation codes consist of four to five digits, classified according to the principles of the traffic law. The sequence from left to right is: the first digit represents the behavior classification code, the second digit represents the demerit point classification code, the third and fourth digits are sequential numbers, and the fifth digit indicates the specific item number. First digit: Behavior classification code, indicating the category of the violation under the Road Traffic Law; Second digit: Demerit point classification code, indicating the category of demerit points for the traffic violation; Third, fourth, and fifth digits: Sequential code, indicating the order of the violation within the same behavior category. For example: 13035—"1" indicates a motor vehicle violation, the second digit "3" indicates 3 demerit points, and "035" indicates the fifth item under the third subcategory of the 3-point deduction category. Behavior classification code explanation: Codes starting with "1" indicate motor vehicle violations, e.g., 1003. Codes starting with "2" indicate non-motor vehicle violations, e.g., 2002. Codes starting with "3" indicate pedestrian or passenger violations, e.g., 3030. Codes starting with "4" indicate highway violations, e.g., 4002. Codes starting with "5" indicate other regulations, e.g., 5005. Codes starting with "7" indicate implementation rules of provinces, autonomous regions, or municipalities, e.g., 7008. Codes starting with "8" indicate local regulations of cities (regions, autonomous prefectures, or leagues), e.g., 8606. There are four common methods to query motor vehicle violations: Visit the office halls of traffic police departments in various districts or counties and use the touch query terminals; Log in to the external service websites of the Public Security Traffic Management Bureau of each city, locate the vehicle violation query section, enter the license plate number and engine number, and click "Query"; Call the hotline (area code + 114) for inquiries; Use the Traffic Management 12123 app (V2.8.1B437 for iOS 15+ or V2.8.1B274 for Android 12+) to query. For the violation of occupying the emergency lane on a highway during traffic congestion, you can handle it through the Traffic Management 12123 app. After logging in, proceed to the violation processing workflow, complete the process, and make the payment.

10

2

Share

Will the electronic eye notify if it captures unlicensed driving?

What engine does the Tiguan use?

Which Models Are Built on the Touareg Platform?

What brand is the je4d25q6a engine?

What is the purpose of a sports car spoiler?

How to Replace the Gear Shift Lever on a Lexus?

What does traffic violation code 4608 mean?

What is the difference between the Nissan Patrol Y61 and Y62?

What is the purpose of the automatic transmission P gear?

What to Do When the Car Window Won't Go Up?

What is the tire size of the Tiguan sedan?