Will the driver die if hitting a wall at 80 km/h?

1 Answers
Sylvia
07/29/25 3:15pm
Hitting a wall at 80 km/h can be fatal for the driver. It is recommended that drivers operate their vehicles safely, avoid speeding and overloading, and refrain from driving while fatigued. When driving on clear roads, keep your eyes level and look about 100 meters ahead, rather than focusing on the immediate front of the vehicle. Typically, when decelerating from speeds above 40 km/h, there is no need to press the clutch initially; only press it when the speed drops to around 20 km/h. Steer slowly during high-speed turns and quickly during low-speed turns. Below are precautions for driving on highways: 1. Drive in the designated lane: Highways have clearly marked lanes for different types of vehicles, such as large and small vehicles. After overtaking, promptly return to your original lane and avoid occupying other lanes for extended periods. Additionally, the emergency lane should not be occupied without special reasons. 2. Maintain a safe speed and avoid speeding: The dangers of speeding are well-known, as it can lead to irreversible consequences both on local roads and highways. 3. Maintain a safe following distance: Under normal conditions with dry roads and good braking, the following distance in meters should not be less than the speed in km/h. For example, at 80 km/h, maintain at least 80 meters; at 100 km/h, maintain at least 100 meters. Always pay attention to roadside distance markers. In rainy, foggy, snowy, or wet road conditions, double the following distance. 4. Observe traffic signs: Continuously watch for roadside and overhead signs and markings, and drive slightly to the right to avoid crossing the right lane divider, allowing sufficient space for overtaking vehicles. 5. Do not arbitrarily occupy the emergency lane in case of accidents: Traffic incidents are inevitable on highways. If other vehicles cause a blockage, avoid occupying the emergency lane, which could hinder rescue operations. 6. Avoid fatigued driving and take timely breaks: Fatigued driving is extremely dangerous on highways, as it reduces reaction time and the ability to handle emergencies effectively.
Was this review help?
18
2
Share
More Forum Discussions

Where is the air filter of the 10-year-old X-Trail located?

The air filter of the X-Trail is generally located under the co-driver's seat or on the left side under the co-driver's seat. You can see it after removing the cover plate. The following is a specific introduction to the X-Trail: 1. Exterior design: The X-Trail has more distinct edges and corners, and the lines are also more angular. It adopts the latest family-style front face design, with the integrated design of the front air intake grille and headlights giving a strong sense of unity. The lines of the bumper are sharper, and the overall sense of unity is extremely strong. The X-Trail's fog lights adopt square fog lights, and the surrounding lines are also very sharp, making the entire front of the car look very domineering. 2. Interior: The X-Trail also looks very durable overall. The internal workmanship and materials are of good quality, and it has a more luxurious feel compared to the same level.
18
3
Share

Where is the fuel filter located on the Changan Edge?

The fuel filter on the Changan Edge is located inside the fuel tank. To replace it, you need to open the fuel tank cap, remove the fuel pump assembly, then take out the old fuel filter and install a new one before reassembling everything. The main function of the fuel filter is to remove impurities from the gasoline. The Changan Edge is a mid-to-large crossover SUV under the Changan Ford brand, with body dimensions of 4878mm in length, 1925mm in width, and 1770mm in height, and a wheelbase of 2850mm. In terms of exterior design, the Edge Luxury series features an impressive appearance with a hexagonal grille integrated with large LED headlights. The Edge comes standard with a 12.8-inch vertical touchscreen, complemented by premium features such as a 10.1-inch full-color digital instrument cluster, black headliner design, and high-grade velvet carpeting to showcase its luxury.
3
1
Share

Where is the Lynk & Co SUV produced?

Lynk & Co vehicles are produced at the factory in Taizhou, Zhejiang, and will also be produced at the factory in Zhangjiagang in the future. Lynk & Co is a brand jointly established by Geely and Volvo, positioned as a high-end brand. The models under Lynk & Co include the 01, 02, and 03. Below is some relevant information about Lynk & Co: 1. Architecture: Lynk & Co models are built on the CMA architecture, which was jointly developed by Geely and Volvo. 2. Interior: The interior design of Lynk & Co vehicles is very much in line with the aesthetics of young people, and the configurations are relatively high-end. The Lynk & Co 03 model is even equipped with racing-style seats, which provide excellent support for the driver during aggressive driving.
15
2
Share

Where is the air filter of the Dongfeng Nissan Qashqai located?

Dongfeng Nissan Qashqai's air filter is located under the driver's position, near the black interior trim panel beside the right foot accelerator pedal. You must first remove the plastic panel on the right side of the accelerator, which has a handle that can be pulled to release it. The air filter, commonly known as the cabin air filter, functions to filter the air entering the cabin from the outside, improving air cleanliness. The Dongfeng Nissan Qashqai is the first product developed by Nissan's European Design Center, positioned between a compact SUV and a hatchback. In terms of dimensions, the Qashqai measures 4315mm in length, 1783mm in width, and 1606mm in height, with a wheelbase of 2630mm. Exterior-wise, the Qashqai combines various excellent features of high-end hatchbacks with design elements from SUVs and HBs, presenting a stylish and avant-garde overall appearance with smooth body lines.
11
5
Share

How to Install Windshield Wipers on a Classic Focus?

Classic Focus windshield wiper installation method: First remove the old wipers to expose the U-shaped hook part. If there is no U-shaped hook, you need to purchase vehicle-specific wipers (when removing the wipers, lower the hook gently to avoid accidentally damaging the windshield). Based on the type of wiper arm on the car, select the appropriate accessory from the parts package. During installation, you must hear a clicking sound to ensure it is properly secured on the wiper blade. The Focus is an A-segment family sedan with body dimensions of 4647mm in length, 1810mm in width, and 1468mm in height. The Focus features exclusive configurations such as a large-opening honeycomb all-black front grille, lower body skirts, rear spoiler, dual exhaust pipes, 18-inch sport wheels, Michelin Pilot Sport 4 tires, leather-wrapped flat-bottom steering wheel, carbon fiber-style trim, and red stitching.
15
4
Share

What types of vehicles use unibody construction?

Vehicles that use unibody construction include: Toyota Prado, Honda Vezel, Toyota Corolla, Dongfeng Peugeot 5008, etc. Unibody construction does not have a separate frame; the body itself serves as the mounting base for the engine and chassis components, functioning as the frame and bearing all loads. Advantages of unibody construction: 1. Lightweight with excellent overall bending and torsional rigidity; 2. Lower cabin floor and reduced vehicle height. Taking the Honda Vezel as an example of a vehicle with unibody construction, it is the first SUV under GAC Honda. In terms of dimensions, this vehicle measures 4294mm in length, 1772mm in width, and 1605mm in height, with a wheelbase of 2610mm. Exterior-wise, the Vezel features a winged front grille design with a mysterious and elegant black theme, integrating the grille and headlights for a bold and dynamic personality. The LED headlights with dual-lamp design, combined with curved LED daytime running lights, perfectly unify elegance and sharpness.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.