Will the Civic automatically lock if the key is left inside the car?

What is the difference between the chassis of the Exeed TXL and the Tiggo 8?

Exeed TXL uses the Qoros chassis, while Tiggo 8 uses the chassis of Tiggo 7 and Tiggo 5x. Chassis Suspension: In terms of chassis suspension, both feature front MacPherson independent suspension and rear multi-link independent suspension. However, the premium chassis of the Exeed, jointly developed with Germany's Benteler, is widely recognized for its smooth and orderly design, exuding a more upscale feel and fully comparable to BBA. In contrast, the Tiggo 8 PLUS is more conventional—not messy but not as smooth as the Exeed. Tire Differences: Both the Exeed TXL Star Edition and the Tiggo 8 PLUS use Continental tires. However, the Tiggo 8 PLUS has slightly wider tires, offering stronger grip and better cornering performance, though with higher road noise. The Exeed TXL Star Edition's tires have a slightly higher aspect ratio, providing better cushioning and higher comfort, but poorer road feedback and relatively sluggish handling during turns, affecting the driver's control of the vehicle.

111

Share

How to Buy Insurance for Cars Over 8 Years Old?

Process for buying insurance for cars over 8 years old: 1. Plan carefully: Make a proper insurance plan and choose suitable coverage types based on needs to avoid waste. Generally, you can opt for compulsory traffic insurance, vehicle damage insurance, third-party liability insurance, and spontaneous combustion insurance. Compulsory traffic insurance: A mandatory liability insurance where the insurer compensates for personal injury, death, or property damage caused to victims (excluding the vehicle occupants and the insured) in road traffic accidents involving the insured vehicle, within the liability limits. Vehicle damage insurance: Covers damage to the insured vehicle caused by an insured accident while the vehicle is being used by the insured or an authorized driver. Third-party liability insurance: Covers the economic liability the insured must bear by law for accidental injuries or direct property damage to third parties caused by the insured or an authorized driver while using the insured vehicle. Spontaneous combustion insurance: An additional coverage under motor vehicle damage insurance. 2. Compare options: Next, compare different auto insurance companies to find the best value. 3. Choose the right channel: Finally, select the correct insurance channel. Online insurance is a smart choice, offering convenience, the ability to compare prices and services of multiple insurers, and a 15% discount.

119

Share

What is the reason for difficulty in shifting from second gear to first gear?

The reason for difficulty in shifting from second gear to first gear is that the vehicle speed does not meet the speed requirement for first gear. Below are specific explanations regarding shifting from second gear to first gear: 1. Key points to remember: Always remember to accelerate before upshifting and decelerate before downshifting. Gear shifting should be performed correctly and swiftly. Upshifting should not be done gear by gear, while downshifting can. Generally, the speed must match the gear for smooth shifting, and only when the speed and gear are matched can the vehicle operate at its optimal state. 2. Consequences: Increased engine noise, higher fuel consumption, and irreversible damage to the engine and transmission, which may lead to long-term issues.

104

Share

What to Do When a Vehicle Battery Leaks?

Vehicle battery leakage can be handled as follows: 1. Check if the battery casing is cracked, identify the acid leakage spot, and use plastic welding to repair it; 2. Remove the panel and inspect the safety valve for any signs of leakage. If found, the safety valve needs to be repaired or replaced; 3. Pressurize and inflate in water to check for bubbles. If bubbles appear, it indicates leakage; if not, it means the battery is normal. A car battery, also known as a storage battery, works by converting chemical energy into electrical energy. Batteries are categorized into conventional lead-acid batteries, dry-charged batteries, and maintenance-free batteries. Typically, the term 'battery' refers to lead-acid batteries. The normal service life of a car battery ranges from 1 to 8 years, depending largely on the vehicle's condition.

115

Share

What Causes a Sudden Scraping Metal Sound from the Car's Chassis?

Here are the reasons for a sudden scraping metal sound from the car's chassis: Disc brake noise: This occurs when the brake shoe support plate, damping spring plate, or guide plate of the disc brake is damaged, deformed, or detached, causing the gap between the brake shoe and the caliper support frame to increase, leading to mutual collision and noise. You can visit a repair shop to fix the deformed parts or replace the detached components. Front suspension ball joint noise: The gap between the ball joint and its seat becomes larger, resulting in severe looseness. Since the ball joint seat is a sealed structure and cannot be disassembled, the only solution is to replace it at a repair shop. Front wheel shock absorber noise: The vehicle often drives on rough roads with improper maintenance, causing the shock absorber to leak oil and become damaged. At a repair shop, the severity of the damage will determine whether it needs repair or replacement.

102

Share

What spark plugs are used in the Elantra?

The spark plug model for the Elantra is RC10YC4. If you prefer platinum spark plugs, you can choose NGK6809 or NGK5787. Under normal maintenance conditions, car spark plugs should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine, so it is recommended to follow the user manual. You can refer to the following standards for maintenance and replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the engine's plastic cover, and remove the high-voltage distributor wires. Mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure they are cleaned thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the high-voltage distributor wires according to the firing order and secure the cover.

119

Share