Will the car move if the handbrake is not pulled after turning off the engine?

1 Answers
Katherine
07/30/25 5:45am
After turning off the engine, the car may move if the handbrake is not pulled. It is essential to engage the handbrake after shutting down the engine. Proper use of the car's braking system is crucial during vehicle operation. Below is a detailed introduction to automobile brakes: 1. Brakes: Brakes, also known as the braking system, refer to the mechanism that stops or reduces the speed of moving locomotives, vehicles, other transportation tools, or machinery. The braking device is a mechanical system designed to slow down the vehicle's speed, also referred to as a decelerator. 2. Braking System: The braking system consists of the control system, hydraulic system, and power assist system. The control system includes components like the pedal and handbrake. The hydraulic system comprises hydraulic fluid, the brake pump, and hydraulic lines. The power assist system includes the vacuum booster pump. The electronic control system consists of the ABS pump, ABS sensors, and ABS computer. The execution system is made up of the brake caliper, brake pads, and brake disc.
Was this review help?
3
4
Share
More Forum Discussions

What are the differences between the WEY Latte and Mocha?

WEY Latte and Mocha differ in terms of model positioning, body dimensions, engine, and transmission. Model Positioning: The WEY Mocha is positioned as a mid-size SUV, while the WEY Latte is positioned as a compact SUV. Body Dimensions: The WEY Mocha has a length of 4875mm, a width of 1960mm, a height of 1690mm, and a wheelbase of 2915mm. The WEY Latte has a length of 4668mm, a width of 1890mm, a height of 1730mm, and a wheelbase of 2745mm. Engine and Transmission: The WEY Mocha is powered by an E20N transverse turbocharged engine, paired with a 9-speed wet dual-clutch transmission (DCT), delivering a maximum horsepower of 214Ps, a maximum power of 157kW, and a maximum torque of 328N.m. The WEY Latte is powered by an E15BD transverse turbocharged engine, paired with a 2-speed hybrid-specific transmission (DHT), delivering a maximum horsepower of 156Ps, a maximum power of 115kW, and a maximum torque of 235N.m.
11
3
Share

Where is the license plate Ji F from?

Ji F is the license plate of Baishan, Jilin Province. More information about license plates is as follows: 1. If you need to handle license plate registration, annual inspection, or traffic violation processing in Baishan, Jilin Province, you can go to the Baishan Vehicle Management Office. Covered areas include Jingyu, Linjiang, Donggang, Changbai, Fusong, Jiangyuan, and Badaojiang District. 2. License plates are used for numbering and information registration of vehicles. Main functions: Through the license plate, you can know the region to which the vehicle belongs, and you can also find the vehicle owner and registration information based on the license plate. 3. The first character of the license plate: Represents the provincial-level administrative region where the vehicle is registered, which is the abbreviation of each (province, municipality directly under the central government, autonomous region). 4. The second letter of the license plate: Represents the prefecture-level administrative region where the vehicle is registered, which is the letter code for each (prefecture-level city, region, autonomous prefecture, league), generally ranked according to the status of each prefecture-level administrative region.
1
3
Share

How to reset the maintenance light on the 2019 Honda Lingpai?

There are three methods to reset the maintenance light on the 2019 Honda Lingpai: 1. Method one for resetting the maintenance light: ① Start the vehicle; ② Press and hold the "TRIP" button on the dashboard until "OILLIFE" and the mileage start flashing, then release; ③ In special cases, it may require pressing and releasing the button several times to clear the maintenance light. 2. Method two for resetting the maintenance light: ① Press the "A" button and step on the brake pedal, neither should be released midway; ② Turn the power to the "ON" position without starting the engine. ③ The dashboard characters will flash; ④ Continue holding the "A" button without releasing until "……" appears on the screen; ⑤ Release the "A" button and remove your foot from the brake. ⑥ The maintenance light reset operation is complete, turn off the vehicle power. 3. Method three for resetting the maintenance light: ① Turn the power to the "ON" position without starting the engine. ② Press the "Display/Info" button (press quickly and multiple times) to bring up the maintenance interface. ③ Then press the "Enter" key, and the dashboard will display information such as the oil monitor. ④ Continue holding the "Enter" button without releasing until the maintenance light disappears.
4
0
Share

Where is the cabin air filter located in the JAC Refine S3?

JAC Refine S3's cabin air filter is located inside the glove compartment in front of the front passenger seat. Here is some relevant information about car cabin air filters: 1. Classification: Car cabin air filters can be divided into filtration type, centrifugal type, oil bath type, and composite type. 2. Lifespan: Generally, the service life of the filter varies depending on the materials used. However, as usage time increases, impurities in water will clog the filter. Therefore, PP filters typically need replacement every three months; activated carbon filters require replacement every six months; ceramic filters can usually last 9-12 months.
2
0
Share

Are Transmission Fluid and Gear Oil the Same?

Transmission fluid and gear oil are essentially the same, but they are used in different locations, hence the difference in names. More information about transmission fluid and gear oil is as follows: 1. Gear oil is generally used in gear transmission mechanisms such as automotive steering gears, transmissions, and drive axles. It differs from engine oil in terms of usage conditions, composition, and performance. During gear transmission, the surface pressure is high, and gear oil plays an important role in lubricating the gears, providing anti-wear properties, cooling, heat dissipation, corrosion and rust prevention, cleaning, and reducing gear surface impact and noise. 2. Transmission fluid is an oil product used to keep the vehicle's transmission clean, ensuring the normal operation of the transmission and extending the life of the transmission device. It has excellent lubrication effectiveness even at low temperatures and reduces oil loss under harsh operating conditions. Depending on the transmission structure, transmission fluid is further divided into automatic transmission fluid and manual transmission fluid.
2
2
Share

Is Lynk & Co a domestic car or a joint venture car?

Lynk & Co is a brand established by Geely Group and belongs to domestic cars. The following is the information about Lynk & Co: 1. Lynk & Co is a joint venture brand, but it is a domestic car. Lynk & Co is a high-end luxury brand under Geely. 2. Lynk & Co 01 is a compact SUV, equipped with a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. 3. The front suspension of Lynk & Co 01 uses MacPherson independent suspension, and the rear suspension uses multi-link independent suspension, which can improve the wheel's ground performance and handling.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.