Will the car lights stay on if the car is locked with the lights on?

1 Answers
SiennaFitz
07/30/25 5:41am
In older car models, the lights will remain on if the car is locked with the lights on, while models equipped with automatic functions will automatically cut off the power to the lights after the engine is turned off. Below are the specific details about car lights: 1. Signal lights: Including turn signals (hazard lights) and brake lights. Proper use of signal lights is crucial for safe driving. 2. Turn signals: Activated when the vehicle is turning, they flash intermittently to alert vehicles and pedestrians around. 3. Brake lights: These are highly bright and are used to inform the following vehicle that the car ahead is slowing down or stopping. Improper use of these lights can easily lead to rear-end collisions. 4. Headlights: Commonly known as high beams, proper use involves switching to low beams when meeting another vehicle and promptly switching back to high beams afterward to extend visibility and compensate for reduced visibility during the encounter. Changing between high and low beams should be used to alert others when passing through intersections or overtaking. Position lights, commonly known as parking lights, are used at night to display the width and length of the vehicle.
Was this review help?
19
1
Share
More Forum Discussions

How Many Times Can You Schedule the Driving Test for Subject 3?

You can take the driving test for Subject 3 up to 5 times. Below are the relevant details about the subject test: 1. According to the latest "Regulations on the Application and Use of Motor Vehicle Driving Licenses" Article 37, each subject test can be taken once, and if failed, a retake is allowed once. If the retake is not attended or still results in failure, the current test session ends, and the applicant must reschedule the test. However, for Subject 2 and Subject 3, the rescheduling must be done after 10 days. 2. If the Subject 3 safety and civilized driving knowledge test is failed, the passed road driving skills test scores remain valid. During the validity period of the driving skills test permit, the number of scheduled tests for Subject 2 and Subject 3 road driving skills tests must not exceed five times. If the fifth scheduled test still results in failure, the scores of other previously passed subjects will be invalidated.
19
3
Share

What is the speed range of 3rd gear?

3rd gear has a speed range of 25-35 km/h. Below is a detailed introduction to gear speeds: 1. Gears: Start in 1st gear, shift to 2nd gear after driving a few meters, shift to 3rd gear when the speed reaches above 20 mph but below 35 mph, shift to 4th gear when the speed reaches above 35 mph but below 45 mph, and shift to 5th gear when the speed exceeds 45 mph. 2. Precautions: While shifting gears, the clutch and throttle must be coordinated properly. Press the clutch pedal all the way down, then release the throttle pedal, and quickly shift to the corresponding gear. After shifting, immediately release your hand from the gear lever to avoid prolonged contact, as this can easily damage the gear lever.
4
4
Share

Why do the wheels lock up after releasing the handbrake?

The reason for the wheels locking up after releasing the handbrake is that the handbrake cable fails to retract, causing the car tires to lock up. Here is some relevant knowledge about car tire lock-up: 1. Static parking: After the vehicle is parked statically, it may experience lock-up after sitting overnight. This phenomenon often occurs in vehicles with drum brakes on the rear wheels. The friction linings are semi-metallic based brake pads, and the brake drums are cast iron components, which are in a tightened state when the handbrake is engaged. 2. Solution: Promptly seek assistance from car dealership service personnel or maintenance technicians to replace the handbrake cable, which can resolve the issue of tire lock-up. If the problem persists, a comprehensive inspection of the car's handbrake system is recommended.
20
3
Share

Can Water Enter the Transmission When a Vehicle Crosses Water?

Whether water enters the transmission when a vehicle crosses water depends on the specific situation. Here is a detailed introduction about automotive transmissions: 1. Overview: A transmission is a device that changes the speed ratio and direction of motion, typically located between the clutch and the central drive. It can alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under different working conditions. Gear-driven transmissions generally consist of a housing and several gears. 2. Classification: Automatic transmissions have become mainstream internationally, mainly including AT, AMT, CVT, and DCT types. Early AT transmission systems were primarily 4AT. AT transmissions use an electronically controlled automatic operating system to achieve automatic shifting. CVT is a true continuously variable transmission with fewer parts and a smaller size. DCT has two clutches.
12
4
Share

How much does the Envision weigh?

The weight of the Envision varies depending on the configuration, with three options: 1575kg, 1685kg, and 1800kg. Below is relevant information about the Envision:1. Envision weight: The weight of the Envision varies depending on the configuration, with three options: 1575kg, 1685kg, and 1800kg. The 2015 Envision 20T two-wheel-drive model has a curb weight of 1575kg. The 2015 Envision 20T four-wheel-drive model has a curb weight of 1685kg. The 2014 Envision 28T four-wheel-drive model has a curb weight of 1800kg.2. Introduction to the Envision: The "Envision," known as ENVISION in English, is Buick's new-generation global strategic model from General Motors. The exterior design of the Buick Envision inherits the essence of the ENVISION Vision concept car, featuring a dynamic, elegant, and grand overall styling. It has a tall and imposing exterior, streamlined side mirrors, a spacious interior, and is equipped with the latest all-wheel-drive technology developed by General Motors.
2
0
Share

Why Do You Get Tanned When Practicing Driving?

Because generally speaking, training grounds are very open and have no shelters, so you are relatively more exposed to the sun. In addition, summer vacation coincides with the time of the year when ultraviolet rays are the strongest, and the scorching heat is unbearable, so getting tanned is a very natural thing. Moreover, if sun protection is not done properly, not only will you get tanned, but you may also experience sunburn. Methods to avoid getting tanned: 1. Avoid the time period with strong ultraviolet rays: An effective way to prevent getting tanned while learning to drive is to avoid practicing during the time when ultraviolet rays are the strongest, such as not going to learn in the morning and at noon. It is recommended to go to learn driving in the evening or at night, after all, many driving schools now have night practice sessions. For those who are afraid of getting tanned, they can avoid the time when ultraviolet rays are strong, so they don’t have to worry about getting tanned. 2. Choose a training car with a sunshade and try to stay in the car: When learning to drive, you can choose a training car with a sunshade, which can effectively block most of the sunlight. Secondly, try to stay in the car to reduce exposure to sunlight. When it is not your turn to drive, you can sit in the back row of the training car, which can reduce sun exposure while also learning the driving methods of other students.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.